Andrew Sherry

2019

Use of local approaches to calculate changes in cleavage fracture toughness due to pre-straining and constraint effects

Jivkov, A., Beswick, J., Sarzosa, D., Ruggieri, C., Savioli, R., James, P. & Sherry, A., 1 Dec 2019, In: Theoretical and Applied Fracture Mechanics. 104, 12 p., 102380.

Research output: Contribution to journal › Article › peer-review

Open Access

File

99 Downloads (Pure)

2018

A statistical assessment of ductile damage in 304L stainless steel resolved using X-ray computed tomography

Cooper, A. J., Tuck, O. C. G., Burnett, T. & Sherry, A., 13 Jun 2018, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing . 728, p. 218-230

Research output: Contribution to journal › Article › peer-review

Ductile Fracture Behaviour of Hot Isostatically Pressed Inconel 690 Superalloy

Cooper, A. J. & Sherry, A., 2018, In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. p. 1-11

Research output: Contribution to journal › Article › peer-review

Open Access

Effect of Temperature on the Fracture Toughness of Hot Isostatically Pressed 304L Stainless Steel

Cooper, A. J. & Sherry, A., 2018, In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science.

Research output: Contribution to journal › Article › peer-review

Open Access

Tensile Fracture Behavior of 316L Austenitic Stainless Steel Manufactured by Hot Isostatic Pressing

Cooper, A. J. & Sherry, A., May 2018, In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 5, p. 1579-1591 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2017

A Multi-Scale Correlative Investigation of Ductile Fracture

Daly, M., Burnett, T., Pickering, E., Tuck, O. C. G., Leonard, F., Kelley, R., Withers, P. & Sherry, A., 15 May 2017, In: Acta Materialia. 130, p. 56-68 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

An Assessment of the Ductile Fracture Behaviour of Hot Isostatically Pressed and Forged 304L Stainless Steel

Cooper, A., Smith, R. J. & Sherry, A., May 2017, In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 5, p. 2207–2221 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Iterative mesh-based hardness mapping

Brayshaw, W., Roy, M., Sun, T., Arkivos, V. & Sherry, A., 2017, In: Science and Technology of Welding and Joining. 22, 5, p. 404-411 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Predicting the effect of constraint on cleavage and ductile fracture toughness using area contour toughness scaling

Seal, C. K. & Sherry, A. H., 2017, In: Engineering Fracture Mechanics. 186, p. 347-367 21 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

221 Downloads (Pure)

Size and geometry effects in notched compact tension specimens

Horn, A. J., Sherry, A. H. & Budden, P. J., 31 Jul 2017, In: International Journal of Pressure Vessels and Piping. 154, p. 29-40 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

1816 Downloads (Pure)

2016

Dualities and dilemmas: Contending with uncertainty in large-scale safety-critical projects

Saunders, F., Sherry, A. & Gale, A., Sept 2016, In: Construction management and economics. 34, 9, p. 657-675

Research output: Contribution to journal › Article › peer-review

Open Access

File

205 Downloads (Pure)

Effect of Oxygen Content Upon the Microstructural and Mechanical Properties of Type 316L Austenitic Stainless Steel Manufactured by Hot Isostatic Pressing

Cooper, A. J., Cooper, N. I., Dhers, J. & Sherry, A., 1 Sept 2016, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 9, p. 4467-4475 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Mapping the multi-faceted: Determinants of uncertainty in safety-critical projects

Saunders, F. C., Gale, A. W. & Sherry, A. H., 2 Mar 2016, In: International Journal of Project Management.

Research output: Contribution to journal › Article › peer-review

Open Access

File

81 Downloads (Pure)

Microstructural Correlation of Hardness Profile in Martensitic Stainless Steel Weldment

Ahmed, I. I., Adebisi, J. A., Yahaya, T., Abdulkareem, S. & Sherry, A., 10 Feb 2016, In: Metallography, Microstructure, and Analysis. 5, 1, p. 43-49 7 p.

Research output: Contribution to journal › Article › peer-review

Responding to project uncertainty: Evidence for high reliability practices in large-scale safety-critical projects

Saunders, F., Gale, A. & Sherry, A., 1 Oct 2016, In: International Journal of Project Management. 34, 7, p. 1252–1265

Research output: Contribution to journal › Article › peer-review

Open Access

File

393 Downloads (Pure)

2015

Conceptualising uncertainty in safety-critical projects: a practitioner perspective

Saunders, F. C., Gale, A. & Sherry, A., 1 Feb 2015, In: International Journal of Project Management. 33, 2, p. 467-478 11 p.

Research output: Contribution to journal › Article › peer-review

Prediction of retained residual stresses in laboratory fracture mechanics specimens extracted from welded components

Hurlston, R. G., Sherry, A. H., James, P. & Sharples, J. K., 1 Apr 2015, In: International Journal of Pressure Vessels and Piping. 128, p. 48-58 11 p.

Research output: Contribution to journal › Article › peer-review

Understanding and accounting for the effects of residual stresses on cleavage fracture toughness measurements in the transition temperature regime

Hurlston, R. G., Sharples, J. K. & Sherry, A. H., 1 Apr 2015, In: International Journal of Pressure Vessels and Piping. 128, p. 69-83 15 p.

Research output: Contribution to journal › Article › peer-review

2013

Effect of strain paths and residual delta ferrite on the failure of cold rolled austenitic stainless steels, type 304L

Ahmed, I. I., Da Fonseca, J. Q. & Sherry, A. H., 2013, In: Journal of Strain Analysis For Engineering Design. 48, 7, p. 410-419 9 p.

Research output: Contribution to journal › Article › peer-review

Effects of martensite development on lattice strain evolution during the in situ deformation of austenitic stainless steels at cryogenic temperatures

Ahmed, I. I., Da Fonseca, J. Q. & Sherry, A. H., Jul 2013, In: Journal of Strain Analysis For Engineering Design. 48, 5, p. 306-312 6 p.

Research output: Contribution to journal › Article › peer-review

Predictions of elastic-plastic crack driving force and redistribution under combined primary and secondary stresses - Part 1: Analytical investigation

James, P. M., Hooton, D. G., Madew, C. J. & Sherry, A. H., Jan 2013, In: International Journal of Pressure Vessels and Piping. 101, p. 101-112 12 p.

Research output: Contribution to journal › Article › peer-review

Predictions of elastic-plastic crack driving force and redistribution under combined primary and secondary stresses - Part 2: Experimental application

James, P. M., Hutchinson, P., Madew, C. J. & Sherry, A. H., Jan 2013, In: International Journal of Pressure Vessels and Piping. 101, p. 91-100 10 p.

Research output: Contribution to journal › Article › peer-review

Study of Lüders phenomena in reactor pressure vessel steels

Beardsmore, D. W., da Fonseca, J. Q., Romero, J., English, C. A., Ortner, S. R., Sharples, J., Sherry, A. H. & Wilkes, M. A., 20 Dec 2013, In: Materials Science and Engineering A. 588, p. 151-166 15 p.

Research output: Contribution to journal › Article › peer-review

The nuclear R&D roadmap

Sherry, A., Sept 2013, Materials World, 21, 9, p. 32-35 4 p.

Research output: Contribution to specialist publication › Article

2012

An engineering assessment methodology for non-sharp defects in steel structures - Part I: Procedure development

Horn, A. J. & Sherry, A. H., Jan 2012, In: International Journal of Pressure Vessels and Piping. 89, p. 137-150 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

596 Downloads (Pure)

An engineering assessment methodology for non-sharp defects in steel structures - Part II: Procedure validation and constraint analysis

Horn, A. J. & Sherry, A. H., Jan 2012, In: International Journal of Pressure Vessels and Piping. 89, p. 151-161 10 p.

Research output: Contribution to journal › Article › peer-review

Influence of Pd and Ru additions on stress corrosion cracking of austenitic stainless steels

Govender, K., Scenini, F., Lyon, S. & Sherry, A., Nov 2012, In: Corrosion Engineering Science and Technology. 47, 7, p. 507-515 8 p.

Research output: Contribution to journal › Article › peer-review

Stress corrosion cracking of Ru doped 304 stainless steel in high temperature water

Scenini, F., Govender, K., Lyon, S. & Sherry, A., Nov 2012, In: Corrosion Engineering Science and Technology. 47, 7, p. 498-506 8 p.

Research output: Contribution to journal › Article › peer-review

Stress corrosion cracking of sensitized type 304 stainless steel in high-temperature water with anionic impurities contamination

Scenini, F. & Sherry, A., Dec 2012, In: Corrosion. 68, 12, p. 1094-1107 13 p.

Research output: Contribution to journal › Article › peer-review

The characterization and interpretation of ductile fracture mechanisms in AL2024-T351 using X-ray and focused ion beam tomography

Taylor, K. L. & Sherry, A. H., Feb 2012, In: Acta Materialia. 60, 3, p. 1300-1310 10 p.

Research output: Contribution to journal › Article › peer-review

The UK challenge

Sherry, A. H., Apr 2012, Materials World, 20, 4, p. 21-23 3 p.

Research output: Contribution to specialist publication › Article

2011

Size effects on fracture in uncontained plasticity conditions in 304(L) stainless steel

Wasylyk, A. P. & Sherry, A. H., 2011, In: American Society of Mechanical Engineers Pressure Vessels and Piping Conference. 7, p. 337-344 8 p.

Research output: Contribution to journal › Article › peer-review

The effect of a residual stress field on fracture initiation in RPV steel

Ortner, S. R., Lee, K. S. & Sherry, A. H., Dec 2011, In: Fatigue and Fracture of Engineering Materials and Structures. 34, 12, p. 945-955 10 p.

Research output: Contribution to journal › Article › peer-review

2010

Prediction of cleavage fracture from non-sharp defects using the Weibull stress based toughness scaling model

Horn, A. J. & Sherry, A. H., Dec 2010, In: International Journal of Pressure Vessels and Piping. 87, 12, p. 670-680 10 p.

Research output: Contribution to journal › Article › peer-review

Preliminary evaluation of digital image correlation for in-situ observation of low temperature atmospheric-induced chloride stress corrosion cracking in austenitic stainless steels

Cook, A., Duff, J., Stevens, N., Lyon, S., Sherry, A. & Marrow, T. J., 2010, In: ECS Transactions. 25, 37, p. 119-132 13 p.

Research output: Contribution to journal › Article › peer-review

2009

Residual stress and constraint effects on cleavage fracture in the transition temperature regime

Lee, K. S., Goldthorpe, M. R., Birkett, R. P. & Sherry, A. H., 2009, In: Fatigue and Fracture of Engineering Materials and Structures. 32, 9, p. 752-768 16 p.

Research output: Contribution to journal › Article › peer-review

2008

Grain-scale heterogeneity effect on mechanistic modelling of cleavage fracture of a ferritic rpv steel forging material

Zhao, X., Da Fonseca, J. Q., Sherry, A. & Lidbury, D., 2008, In: American Society of Mechanical Engineers Pressure Vessels and Piping Conference. 6, p. 697-704 7 p.

Research output: Contribution to journal › Article › peer-review

Introducing heterogeneity into brittle fracture modeling of a 22NiMoCr37 ferritic steel ring forging

Zhao, X., Lidbury, D., Da Fonseca, J. Q. & Sherry, A., Apr 2008, In: Journal of ASTM International. 5, 4

Research output: Contribution to journal › Article › peer-review

Some challenges in the treatment of residual stress in flaw tolerance calculations-A TAGSI view

Dolby, R. E., Leggatt, R., Howard, I. C., Smith, D. & Sherry, A. H., Mar 2008, In: International Journal of Pressure Vessels and Piping. 85, 3, p. 166-174 8 p.

Research output: Contribution to journal › Article › peer-review

The assessment of residual stress effects on ductile tearing using continuum damage mechanics

Sherry, A. H., Wilkes, M. A., Sharples, J. K. & Budden, P. J., Nov 2008, In: Journal of Pressure Vessel Technology, Transactions of the ASME. 130, 4, p. 0412121-0412128 7 p.

Research output: Contribution to journal › Article › peer-review

2007

Advances and challenges in structural integrity

Sherry, A. H., 2007, In: Applied Mechanics and Materials. 7-8, p. 13-22 9 p.

Research output: Contribution to journal › Article › peer-review

Measurement and modelling of residual stress effects on cracks

Sherry, A. H., Da Fonseca, J. Q., Goldthorpe, M. R. & Taylor, K., Mar 2007, In: Fatigue and Fracture of Engineering Materials and Structures. 30, 3, p. 243-257 14 p.

Research output: Contribution to journal › Article › peer-review

The remote monitoring and reliable prediction of materials performance in nuclear applications

Sherry, A. H., Carley, A. F., Cegla, F., Fitzpatrick, M. R., Marsden, B. J. & Smith, D. J., 2007, In: Nuclear Future. 3, 5, p. 230-240

Research output: Contribution to journal › Article › peer-review

2006

Grains of truth and the value of inside information

Sherry, A., 2006, In: Nuclear Future. 2, 1, p. 10-18 8 p.

Research output: Contribution to journal › Article › peer-review

Materials modelling in the Nuclear Industry

Sherry, A. H., 2006, In: Materials World. 14, 3, p. 22-24 3 p.

Research output: Contribution to journal › Article › peer-review

On the re-characterisation of defects in structural integrity assessments due to snap-through

Burdekin, F. M. & Sherry, A. H., Aug 2006, In: International Journal of Pressure Vessels and Piping. 83, 8, p. 618-623 5 p.

Research output: Contribution to journal › Article › peer-review

Special issue on cleavage

Sherry, A. H., Sept 2006, In: Fatigue and Fracture of Engineering Materials and Structures. 29, 9-10, p. 659-660 1 p.

Research output: Contribution to journal › Article › peer-review

Validation of constraint-based methodology in structural integrity of ferritic steels for nuclear reactor pressure vessels

Lidbury, D. P. G., Sherry, A. H., Bass, B. R., Gilles, P., Connors, D., Eisele, U., Keim, E., Keinanen, H., Wallin, K., Lauerova, D., Marie, S., Nagel, G., Nilsson, K., Siegele, D. & Wadier, Y., Sept 2006, In: Fatigue and Fracture of Engineering Materials and Structures. 29, 9-10, p. 829-849 20 p.

Research output: Contribution to journal › Article › peer-review

2005

Material constraint parameters for the assessment of shallow defects in structural components. Part II: Constraint-based assessment of shallow defects

Sherry, A. H., Hooton, D. G., Beardsmore, D. W. & Lidbury, D. P. G., Oct 2005, In: Engineering Fracture Mechanics. 72, 15, p. 2396-2415 19 p.

Research output: Contribution to journal › Article › peer-review

Material constraint parameters for the assessment of shallow defects in structural components - Part I: Parameter solutions

Sherry, A. H., Wilkes, M. A., Beardsmore, D. W. & Lidbury, D. P. G., Oct 2005, In: Engineering Fracture Mechanics. 72, 15, p. 2373-2395 22 p.

Research output: Contribution to journal › Article › peer-review

Andrew Sherry

Research output

Search results