Brian Derby

Search results

• 2013

  Creep and Thermal Cycling

  Dunand, D. C. & Derby, B., 22 Oct 2013, Fundamentals of Metal-Matrix Composites. Suresh, S. (ed.). Elsevier BV, p. 191-214 24 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 2012

  When the Drop Hits the Substrate

  Stringer, J. & Derby, B., 9 Nov 2012, Inkjet Technology for Digital Fabrication. Hutchings, I. M. & Martin, G. D. (eds.). John Wiley & Sons Ltd, p. 113-139 27 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 2010

  Inkjet Printing of Catalyst-Inks on Si Wafers and the Subsequent Synthesis of Carbon Nanotubes by Chemical Vapour Deposition

  Mansoor, M., Kinloch, I. & Derby, B., Jun 2010, Key Engineering Materials. Khan, S., Salam, I. U. & Ahmed, K. (eds.). Trans Tech Publications Ltd, Vol. 442. p. 7-14 8 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Piezoelectric inkjet printing of cells and biomaterials

  Saunders, R., Gough, J. & Derby, B., 2010, Cell and Organ Printing|Cell and Organ Print.. Springer Nature, p. 35-50 15 p.

  Research output: Chapter in Book/Conference proceeding › Chapter

  • Inkjet Printing 100%
  • Piezoelectric 100%
  • Multiple Cell Type 100%
  • Deposition Characteristics 100%
  • Living Cell 50%
• 2009

  Fabrication of a Glucose Biosensor by Piezoelectric Inkjet Printing

  Wang, T., Cook, C. & Derby, B., 2009, 2009 Third International Conference on Sensor Technologies and Applications. IEEE, 4 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Inkjet Printing of Enzymes for Glucose Biosensors

  Cook, C., Wang, T. & Derby, B., 2009, Materials and Strategies For Lab-on-a-Chip - Biological Analysis, Cell-Material Interfaces and Fluidic Assembly of Nanostructures. Murthy, S. K., Khan, S. A., Ugaz, V. M. & Zeringue, H. C. (eds.). Cambridge University Press, p. 103-110 8 p. (Materials Research Society Symposium Proceedings; vol. 1191).

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Universal Scaled Strength Behaviour for Micropillars and Nanoporous Materials

  Derby, B. & Dou, R., 2009, Materials Research Society symposium proceedings. Trans Tech Publications Ltd, Vol. 1185. 1185-II07-03

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 2008

  The Strength of Gold Nanowires and Nanoporous Gold

  Dou, R. & Derby, B., 2008, Symposium LL – Nanowires–Systhesis, Properties, Assembly and Applications. Cui, Y., Bakkers, E. P. A. M., Lauhon, L. & Talin, A. (eds.). Materials Research Society, (Materials Research Society Proceedings; vol. 1144).

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 2006

  The effect of focused ion beam machining on residual stress and crack morphologies in alumina

  Inkson, B., Leclere, D., Elfallagh, F. & Derby, B., 2006, Journal of Physics: Conference Series. Vol. 26. p. 219-222 4 p.

  Research output: Chapter in Book/Conference proceeding › Chapter
• 2005

  The application of modern metallurgical principles and knowledge to the manufacture of Mokume gane (wood-Grain metal) decorative alloy

  Ferguson, I., Derby, B. & Thompson, G., 2005, Materials Issues in Art and Archaeology: Proceedings of a meeting held 29 November - 2 December 2004, Boston, Massachusetts, USA. Vandiver, P. B. (ed.). Cambridge University Press, Vol. 7. p. 1-7 7 p. (Materials Research Society Symposium Proceeding; vol. 852).

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 2004

  Combined nanoindentation and acoustic determination of the elastic properties of float glass surface

  Goodman, O. & Derby, B., 2004, Indentation Techniques in Ceramic Materials Characterization. Solomah, A. G. (ed.). p. 93-105 13 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Ink-jet printing of human cells

  Saunders, R., Derby, B., Gough, J. & Reis, N., 2004, Architecture and Application of Biomaterials and Biomolecular Materials. Materials Research Society

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Measured anisotropy of alumina components produced by direct ink-jet printing

  Smith, P., Derby, B., Reis, N., Wallwork, A. & Ainsley, C., May 2004, Key Engineering Materials. Mandal, H. & Ovecoglu, L. (eds.). Trans Tech Publications Ltd, Vol. 264-268. p. 693-696 4 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 2003

  Thermal and residual stress modelling of the selective laser sintering process

  Ibraheem, A., Derby, B. & Withers, P., 2003, MRS Online Proceedings Library (OPL). Vol. Volume 758 (Symposium LL – Rapid Prototyping Technologies). p. 47-52 6 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 2001

  Ink jet printing of alumina suspensions in liquid wax

  Reis, N., Seerden, K. A. M., Grant, P. S., Derby, B. & Evans, J. R. G., 2001, Ceramics: from Processing to Production. IOM Communications Ltd, (Ceramics: from Processing to Production).

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Investigation of the wetting characteristics of chromium based active braze alloys on silicon nitride

  Winn, A., Derby, B. & Hayes, F., Dec 2001, Key Engineering Materials. Kermel, C., Lardot, V., Libert, D. & Urbain, I. (eds.). Trans Tech Publications Ltd, Vol. 206-213. p. 511-514 4 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Rapid prototyping of ceramic casting cores for investment casting

  Ainsley, C., Reis, N. & Derby, B., Dec 2001, Key Engineering Materials. Kermel, C., Lardot, V., Libert, D. & Urbain, I. (eds.). Trans Tech Publications Ltd, Vol. 206-213. p. 297-300 4 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 2000

  Characterisation of void and reinforcement distributions by edge contrast

  Justice, I., Derby, B., Davis, G., Anderson, P. & Elliott, J., 1 Jan 2000, X-ray Tomography in Material Science. Baruchel, J., Buffiere, J.-Y., Maire, E., Merie, P. & Peix, G. (eds.). Hermes Science

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Freeform fabrication of ceramics by hot-melt ink-jet printing

  Derby, B., Reis, N., Seerden, K. A. M., Grant, P. S. & Evans, J. R. G., 2000, Solid Freeform and Additive Fabrication-2000. Materials Research Society, (MRS proceedings; vol. 625).

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Residual stress determination and subsurface microstructure in ground and polished alumina/silicon carbide nanocomposites and monolithic alumina ceramics

  Wu, H., Roberts, S., Winn, A. & Derby, B., Jan 2000, MRS Online Proceedings Library (OPL). Vol. Volume 581 (Symposium F – Nanophase & Nanocomposite Materials II). p. 303-308 6 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 1999

  Direct inkjet deposition of ceramic green bodies: II - Jet behaviour and deposit formation

  Reis, N., Seerden, K., Derby, B., Halloran, J. & Evans, J., 1999, Solid Freeform and Additive Fabrication: Symposium held November 30-December 1,1998, Boston, Massachusetts, U.S.A.. Dimos, D., Danforth, S. C. & Cima, M. J. (eds.). p. 147-152 6 p. (Materials Research Society Symposium Proceedings; vol. 542).

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Direct ink-jet deposition of ceramic green bodies: I - Formulation of build materials

  Seerden, K., Reis, N., Derby, B., Grant, P., Halloran, J. & Evans, J., 1999, Solid Freeform and Additive Fabrication: Symposium held November 30-December 1,1998, Boston, Massachusetts, U.S.A. Dimos, D., Danforth, S. & Cima, M. J. (eds.). 1 ed. Cambridge University Press, p. 141-146 6 p. (Materials Research Society Symposium Proceedings; vol. 542).

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review
• 1996

  Damage nucleation and growth in particle reinforced aluminium matrix composites

  Justice, I., Anderson, P., Davis, G., Derby, B. & Elliott, J., Nov 1996, Key Engineering Materials. Trans Tech Publications Ltd, Vol. 127-131. p. 945-952 8 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Faceted voids and grain orientation at solid state diffusion bonded interfaces between Cu and single crystal cubic ZrO2

  Ishii, H., Mun, J. D., Wilkinson, A. J., Derby, B. & Sutton, A. P., Feb 1996, Materials Science Forum. Ferro, A. C., Conde, J. P. & Fortes, M. A. (eds.). Trans Tech Publications Ltd, Vol. 207-209. p. 253-256 4 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review

• Modelling consolidation of Ti-6Al-4V/SiC matrix-coated fibre metal matrix composites

  Schuler, S., Derby, B., Wood, M. & Ward-Close, C. M., Nov 1996, Key Engineering Materials. Fuentes, M., Martinez-Esnaola, J. & Daniel, A. M. (eds.). Trans Tech Publications Ltd, Vol. 127-131. p. 351-358 8 p.

  Research output: Chapter in Book/Conference proceeding › Chapter › peer-review