Joao Quinta Da Fonseca

Search results

• 2019

  UNDERSTANDING THE EFFECT OF STRAIN LOCALIZATION ON CORROSION FATIGUE OF TYPE 304 AUSTENITIC STAINLESS STEELS IN HIGH TEMPERATURE WATER

  Wang, H., Scenini, F., Quinta da Fonseca, J., Burke, M. G., Meadows, J., Platts, N. & Tyce, D., 1 Jul 2019, (Accepted/In press) 19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Strain Localization 100%
  • Temperature Water 100%
  • Austenitic Stainless Steel 100%
  • Effect of Strain 100%
  • Corrosion Fatigue 100%
• 2018

  Predicting the flow stress of Zircaloy-4 under in-reactor accident conditions

  Nguyen, C.-T., Romero, J., Ambard, A., Preuss, M. & Quinta Da Fonseca, J., 2018, ASTM Proceedings, Zirconium in the Nuclear Industry, 18th International Symposium . (Selected Technical Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

  • Flow Stress 100%
  • Heating Rate 100%
  • Loss of Coolant Accidents 25%
  • Phase Fraction 25%
  • Yield Stress 25%
  343 Downloads (Pure)

• Texture Development during Rolling of α + β Dual-Phase ZrNb Alloys

  Daniel, C. S., Honniball, P. D., Bradley, L., Preuss, M. & Quinta Da Fonseca, J., 1 Feb 2018, Zirconium in the Nuclear Industry: 18th International Symposium. p. 151-179

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
• 2016

  3D characterisation of early twin formation in Ti-4Al by diffraction contrast tomography

  Laura Nervo, Wolfgang Ludwig, Quinta da Fonseca, J. & Preuss, M., 6 May 2016, Proceedings of the 13th World Conference on Titanium. Minerals, Metals & Materials Society, p. 1077-1082 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

  • Early Stage 100%
  • Tomography 100%
  • Grain Size 100%
  • Microstructure 50%
  • Strain Localization 50%
  207 Downloads (Pure)

• SLIP BAND CHARACTERISATION IN Ti-6Al-4V WITH VARYING DEGREES OF MACROZONES

  Lunt, D., Quinta da Fonseca, J., D. Rugg & Preuss, M., 6 May 2016, Proceedings of the 13th World Conference on Titanium. p. 1129-1134 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Ti-6al-4v 100%
  • Ti-6Al-4V 100%
  • Speckle Patterns 100%
  • Strain Localization 66%
  • Localized Deformation 33%

• THE EFFECT OF ALUMINIUM ON DEFORMATION AND TWINNING IN ALPHA TITANIUM: THE ND CASE

  Fitzner, A., Thomas, M., Quinta da Fonseca, J., Zhang, S.-Y., Joe Kelleher & Preuss, M., 2016, Proceedings of the 13th World Conference on Titanium., V. V. E. A. (ed.).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

  • Electron Backscatter Diffraction 100%
  • Titanium 100%
  • Deformation Behavior 100%
  • Loading Direction 100%
  642 Downloads (Pure)
• 2014

  Characterization of abnormal grain coarsening in Alloy 718

  Watson, R., Preuss, M., Quinta da Fonseca, J., Witulski, T., Terlinde, G. & Büscher, M., 2014, {MATEC} Web of Conferences. EDP Sciences, Vol. 14.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Grain Coarsening 100%
  • Coarsening 100%
  • Stored Energy 66%
  • Electron Backscatter Diffraction 66%
  • Microstructure 33%

• Texture Formation in Flow Formed Ferritic Steel Tubes and the Influence of the Process Parameters

  Tsivoulas, D., Timar, G., Tuffs, M., Quinta Da fonseca, J. & Preuss, M., 2014, Materials Science Forum, 783-786. Vol. 783. p. 2602-2607 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Effect of Strain and Temperature Profiles on Static Recrystallization during Solution Heat Treatment After Hot Deformation of Alloy 718

  Watson, R., Preuss, M., Quinta da Fonseca, J., Witulski, T. & Terlinde, G., 2014, 8th International Symposium on Superalloy 718 and Derivatives. p. 873-884 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• 2013

  Effects of flow forming parameters on plasticity investigated by means of residual stress and texture analysis

  Tsivoulas, D., Tuffs, M., Quinta Da Fonseca, J. & Preuss, M., 2013, MS&T '13: materials science & technology 2013 conference and exhibition, October 27-31, 2013, Montreal, QC, Canada. Metals & Materials Society (TMS) (ed.). 2013 ed. John Wiley & Sons Ltd, Vol. 3. p. 1798-1804 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Residual Stress 100%
  • Texture Analysis 100%
  • Flow Forming 100%
  • X-Ray Diffraction 66%
  • Microstructure 50%

• Measurement of strain and lattice rotation in the particle deformation zone

  Ko, L. C. L. & Da Fonseca, J. Q., 2013, Materials Science Forum|Mater. Sci. Forum. Vol. 753. p. 21-24 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Deformation Zone 100%
  • Particle Stimulated Nucleation 100%
  • Nucleation 100%
  • Electron Backscatter Diffraction 100%
  • Localized Deformation 50%

• Texture and microstructure evolution of a zirconium alloy during uniaxial compression at 500°c

  Honniball, P., Preuss, M., Rugg, D. & Quinta Da Fonseca, J., 2013, Materials Science Forum|Mater. Sci. Forum. Vol. 753. p. 42-45 3 p. (Materials Science Forum).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Microstructure Evolution 100%
  • Texture Evolution 100%
  • Zirconium Alloys 100%
  • X-Ray Diffraction 100%
  • Electron Backscatter Diffraction 100%

• The effect of temperature on the formability of a high strength aluminium automotive alloy

  Nolan, R., Kulas, M.-A., Prangnell, P. & Quinta Da fonseca, J., 2013, host publication. Vol. 2. p. 1304-1311 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  File

  • Automotives 100%
  • Fracture Surface 100%
  • Tensile Testing 100%
  • Microstructural Analysis 100%
  • Deep Drawing 100%
  869 Downloads (Pure)
• 2012

  SCC susceptibility in alloy 600 with different strain histories

  Lorho, N., Quinta da Fonseca, J., Vaillant, F. & Leonard, F., Sept 2012, Eurocorr 2012.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The effect of processing temperature on texture evolution and variant selection during phase transformation in Ti-6A-4V

  Obasi, G. C., Birosca, S., LeoPrakash, D. G., Quinta Da Fonseca, J. & Preuss, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 771-775 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• 2011

  Microstructural investigation on the effect of cold work on environmentally assisted cracking of austenitic stainless steel

  Wright, D., Di Gioacchino, F., Scenini, F., Da Fonseca, J. Q., Nouraei, S., Mottershead, K. & Tice, D., 2011, 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors 2011|Int. Conf. Environ. Degrad. Mater. Nucl. Power Syst.-Water React.. Vol. 3. p. 2205-2216 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Microstructure 100%
  • Stress Corrosion Cracking 100%
  • Cold Work 100%
  • Austenitic Stainless Steel 100%
  • Austenitic Stainless Steels 100%

• MODELLING AND MEASUREMENT OF PLASTIC DEFORMATION AND GRAIN ROTATION IN 3D AT THE GRAIN-TO-GRAIN LEVEL

  Gonzalez, D., King, A., Simonovski, I., Quinta da Fonseca, J. & Withers, P. J., 2011, Proceedings of the 1st World Congress on Integrated Computational Materials Engineering . p. 107-112 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Texture evolution of zircaloy-2 during beta-quenching: Effect of process variables

  Romero, J., Preuss, M., Da Fonseca, J. Q., Comstock, R. J., Dahlbäck, M. & Hallstadius, L., 2011, ASTM Special Technical Publication|ASTM Spec. Tech. Publ.. Vol. 1529. p. 176-193 17 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Process Variable 100%
  • Texture Evolution 100%
  • Boiling Water Reactor 100%
  • Zircaloy 100%
  • Plastic Deformation 100%

• Understanding the limits of lattice orientation data analysis in environmental degradation studies

  Di Gioacchino, F., Quinta Da Fonseca, J., Wright, D. & Scenini, F., 2011, 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors 2011|Int. Conf. Environ. Degrad. Mater. Nucl. Power Syst.-Water React.. Vol. 3. p. 2193-2203 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Plastic Deformation 100%
  • Strain Localization 50%
  • Individual Grain 50%
  • Environment-Assisted Cracking 50%
  • Digital Image Correlation 50%
• 2010

  Intergranular strains in pre-strained and welded pipes

  Acar, M. O., Bouchard, P. J., Quinta Da Fonseca, J., Fitzpatrick, M. E. & Gungor, S., 2010, Materials Science Forum|Mater. Sci. Forum. Vol. 652. p. 13-18 5 p. (Materials Science Forum).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Plastic Deformation 100%
  • Residual Stress 66%
  • Neutron Diffraction 66%
  • Annealing Effect 40%
  • Diffraction Measurement 33%

• Towards modelling intergranular stress-corrosion cracks using experimentally obtained grain topologies

  Simonovski, I., Cizelj, L., Marrow, T. J., Quinta Da Fonseca, J. & King, A., 2010, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP|ASME Pressure Vessels Piping Div. Publ. PVP. Vol. 3. p. 543-550 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Stress Corrosion Crack 100%
  • Finite Element Modeling 100%
  • Individual Grain 66%
  • Aging of Material 66%
  • Multiscale Model 66%
• 2009

  Determination and interpretation of texture evolution during deformation of a zirconium alloy

  Allen, V. M., Da Fonseca, J. Q., Preuss, M., Robson, J. D., Daymond, M. & Comstock, R. J., 2009, ASTM Special Technical Publication|ASTM Spec. Tech. Publ.. Vol. 1505. p. 550-563 13 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Texture Evolution 100%
  • Room Temperature 100%
  • Zirconium Alloys 100%
  • Crystal Plasticity 100%
  • Deformation Mechanism 66%

• Towards modelling intergranular stress-corrosion cracks using experimentally obtained grain topologies

  Simonovski, I., Cizelj, L., Marrow, T., Quinta da Fonseca, J. & King, A., 2009, Proceedings of PVP2009, 2009 ASME Pressure Vessels and Piping Division Conference. 30 ed. Vol. 26.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• 2008

  Modelling of intergranular damage in polycrystalline metals

  Simonovski, I., Marrow, J., Cizelj, L., Quinta da Fonseca, J., Stevens, N. & Zhang, Y., 2008, Proceedings of the International Conference Nuclear Energy for New Europe. p. 8-11 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The effect of gamma ' particle size on the deformation mechanism in an advanced polycrystalline nickel-base superalloy

  Preuss, M., Quinta da Fonseca, J., Grant, B., Knoche, E., Moat, R., Daymond, M., Reed, R. C. (Editor), Green, K. A. (Editor), Caron, P. (Editor), Gabb, T. P. (Editor), Fahrmann, M. G. (Editor) & Huron, E. S. (Editor), 15 Nov 2008, Superalloys 2008: 11th International Symposium on Superalloys. Reed, R. C., Green, K. A., Caron, P., Gabb, T. P., Fahrmann, M. G. & Huron, E. S. (eds.). Minerals, Metals & Materials Society, p. 405-414 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Polycrystalline 100%
  • Deformation Mechanism 100%
  • Plastic Deformation 100%
  • Heat Resistant Alloys 100%
  • Load Transfer 100%
• 2007

  Assessing the effect of intrinsinc microscale heterogeneity on brittle fracture of a ferritic steel

  Zhao, X., Quinta Da fonseca, J., Sherry, A. & Lidbury, D. (Editor), 2007, PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 6 - MATERIALS AND FABRICATION. Lidbury, D. (ed.). p. 599-607 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Local plastic strain measurement by EBSD

  Kamaya, M., Quinta Da Fonseca, J., Li, L. M. & Preuss, M., 2007, Applied Mechanics and Materials|Appl. Mech. Mater.. Vol. 7-8. p. 173-179 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Plastic Strain 100%
  • Tensiles 33%
  • Individual Grain 33%
  • Local Strain 33%
  • Pure Copper 33%
• 2006

  Assessment of defects under combined primary and residual stresses

  Sherry, A. H., Quinta Da Fonseca, J., Taylor, K. & Goldthorpe, M. R., 2006, Residual Stress and Its Effects on Fatigue and Fracture. Kluwer Academic Publishers, p. 223-232 9 p. (Residual Stress and Its Effects on Fatigue and Fracture - Proceedings of a Special Symposium, Held Within the 16th European Conference of Fracture, ECF 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Residual Stress 100%
  • Defects 100%
  • Structural Integrity 33%
  • Stress Field 33%
  • Crack Driving Force 33%

• Measuring and predicting the effects of residual stresses on crack propagation

  Shterenlikht, A., Stefanescu, D., Fox, M., Taylor, K., Quinta da Fonseca, J., Sherry, A. & Withers, P., 2006, Materials Science Forum|Mater Sci Forum. Vol. 524-525. p. 77-82 5 p. (Materials Science Forum).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Residual Strain 100%
• 2005

  Evolution of internal stresses during the plastic deformation of if steel and their correlation with crystal orientation

  Quinta Da Fonseca, J. & Bate, P. S., 2005, Materials Science Forum|Mater Sci Forum. Vol. 495-497. p. 1055-1060 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Residual Stress Measurement 100%
  • Internal Stress 100%
  • Fatigue Property 100%
  • Elastic Strain 100%
  • Shape Element 100%
• 2004

  Characterisation of Gamma-Prime across inertia friction welded Alloy 720Li

  Preuss, M., Quinta da Fonseca, J., Kyriakoglou, I., Withers, P. & Baxter, G. J., 2004, Superalloy 2004. p. 477-484 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Characterisation of gamma ‘ across inertia friction welded Alloy 720Li

  Preuss, M., Quinta da Fonseca, J., Kyriakoglou, I., Withers, P., Baxter, G. J., Green, K. A. (Editor), Pollock, T. M. (Editor), Harada, H. (Editor), Howson, T. E. (Editor), Reed, R. C. (Editor), Schirra, J. J. (Editor) & Walston, S. (Editor), 2004, Superalloys 2004. Green, K. A., Pollock, T. M., Harada, H., Howson, T. E., Reed, R. C., Schirra, J. J. & Walston, S. (eds.). p. 477-484 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Mechanical Property Mapping Using Image Correlation and Electronic Speckle

  Quinta da Fonseca, J., Preuss, M., Ryan, P. & Withers, P., 2004, Applied Mechanics and Materials, Vols.1-2. p. 147-152 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Mechanical property mapping using image correlation and electronic speckle interferometry

  Quinta Da fonseca, J., Preuss, M., Ryan, P. & Withers, P., 2004, Applied Mechanics and Materials. Vol. 1-2. 6 p. (Applied Mechanics and Materials).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Strain Measurement 100%
  • Speckle Interferometry 100%
  • Mechanical Testing 50%
  • Elastic Moduli 50%
  • Microhardness 50%
• 2002

  Image processing issues in digital strain mapping

  Clocksin, W. F., Quinta Da Fonseca, J., Withers, P. J. & Torr, P. H. S., 2002, Proceedings of SPIE - The International Society for Optical Engineering|Proc SPIE Int Soc Opt Eng. Tescher, A. G. (ed.). Vol. 4790. p. 384-395 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Image Processing 100%
  • Detection Algorithm 100%
  • Tasks 50%
  • Test Rig 50%
  • Processing Technique 50%

• Inspection of surface strain in materials using dense displacement fields

  Clocksin, W. F., Chivers, K. F., Torr, P. H., Quinta da Fonseca, J. & Withers, P., 2002, Proceedings International Conference on New Challenges in Mesomechanics, Aalborg University, Denmark. Vol. 2.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review