Research output per year
Research output per year
- 1 - 50 out of 104 results
Search results
-
2023
A novel integrated framework for reproducible formability predictions using virtual materials testing
Plowman, A., Jedrasiak, P., Jailin, T., Crowther, P., Mishra, S., Shanthraj, P. & Quinta da fonseca, J., 31 Jan 2023, In: Materials Open Research. 2, p. 2Research output: Contribution to journal › Article › peer-review
Open Access -
Application of a new method for accurate determination of α and β texture in Ti-6Al-4V from synchrotron diffraction intensities
Daniel, C. S., Zeng, X., Michalik, Š., Hunt, S. A. & Quinta da Fonseca, J., 1 May 2023, In: Materials Characterization. 112769.Research output: Contribution to journal › Article › peer-review
Open Access -
Mapping Plastic Deformation Mechanisms in AZ31 Magnesium Alloy at the Nanoscale
Yavuzyegit, B., Avcu, E., Smith, A., Donoghue, J. M., Lunt, D., Robson, J. D., Burnett, T. L., Quinta da Fonseca, J. & Withers, P. J., 23 Mar 2023, (Accepted/In press) In: Acta Materialia.Research output: Contribution to journal › Article › peer-review
Open Access -
The role of hydrides and precipitates on the strain localisation behaviour in a zirconium alloy
Thomas, R., Lunt, D., Atkinson, M., Da Fonseca, J. Q., Preuss, M., Honniball, P. & Frankel, P., 2 Sept 2023, (E-pub ahead of print) In: Acta Materialia. 119327Research output: Contribution to journal › Article › peer-review
Open Access -
2022
Finite Element Modeling of Hot Compression Testing of Titanium Alloys
Jedrasiak, P., Shercliff, H., Mishra, S., Daniel, C. S. & da Fonseca, J. Q., Sept 2022, In: Journal of Materials Engineering and Performance. 31, 9, p. 7160-7175 16 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Finite element modelling of hot compression testing of titanium alloys
Jedrasiak, P., Shercliff, H., Mishra, S., Daniel, C. S. & Quinta da Fonseca, J., 18 Feb 2022, (Accepted/In press) In: Journal of Materials Engineering and Performance.Research output: Contribution to journal › Article › peer-review
-
Optimising large-area crystal orientation mapping of nanoscale β phase in α + β titanium alloys using EBSD
Davis, A., Zeng, X., Thomas, R., Kennedy, J., Donoghue, J., Gholinia, A., Prangnell, P. & Da Fonseca, J. Q., 7 Oct 2022, In: Materials Characterization. 112371.Research output: Contribution to journal › Article › peer-review
-
Slip activity during low-stress cold creep deformation in a near-α titanium alloy
Dichtl, C., Lunt, D., Atkinson, M., Thomas, R., Plowman, A., Barzdajn, B., Sandala, R., Da Fonseca, J. Q. & Preuss, M., 1 Feb 2022, In: Acta Materialia. p. 117691Research output: Contribution to journal › Article › peer-review
Open AccessFile72 Downloads (Pure) -
2021
Co-deformation and dynamic annealing effects on the texture development during alpha–beta processing of a model Zr-Nb alloy
Daniel, C. S., Garner, A., Honniball, P. D., Bradley, L., Preuss, M., Prangnell, P. B. & Quinta Da Fonseca, J., 1 Feb 2021, In: Acta Materialia. 205, p. 116538Research output: Contribution to journal › Article › peer-review
-
High-Resolution Digital Image Correlation study of the strain localization during loading of a shot-peened RR1000 nickel-based superalloy
Orozco-caballero, A., Jackson, T. & Da Fonseca, J. Q., 12 Sept 2021, In: Acta Materialia. 117306.Research output: Contribution to journal › Article › peer-review
Open AccessFile220 Downloads (Pure) -
The evolution of abnormally coarse grain structures in beta-annealed Ti-6Al%-4V% rolled plates, observed by in-situ investigation
Byres, N., Quinta da Fonseca, J., Daniel, C., Donoghue, J., Davis, A., Shanthraj, P., Dod, B. & Prangnell, P., 1 Dec 2021, In: Acta Materialia. 221, 117362.Research output: Contribution to journal › Article › peer-review
-
Understanding the role of local texture variation on slip activity in a two-phase titanium alloy
Lunt, D., Thomas, R., Atkinson, M., Smith, A., Sandala, R., Quinta da Fonseca, J. & Preuss, M., 1 Sept 2021, In: Acta Materialia. 216, 117111.Research output: Contribution to journal › Article › peer-review
Open Access -
2020
Analysis of the Development of Abnormal Grains Structures During Beta Annealing of Ti-64 Wrought Products
Quinta Da Fonseca, J., 12 Oct 2020, In: MATEC Web of Conferences.Research output: Contribution to journal › Article › peer-review
Open Access -
A statistical study of the relationship between plastic strain and lattice misorientation on the surface of a deformed Ni-based superalloy
Harte, A., Atkinson, M., Preuss, M. & Fonseca, J. Q. D., 22 May 2020, In: Acta Materialia.Research output: Contribution to journal › Article › peer-review
Open Access -
A statistical study of the relationship between plastic strain and lattice misorientation on the surface of a deformed Ni-based superalloy
Harte, A., Atkinson, M., Preuss, M. & Quinta da Fonseca, J., 13 May 2020, (Accepted/In press) In: Acta Materialia.Research output: Contribution to journal › Article › peer-review
-
Comparison of sub-grain scale digital image correlation calculated using commercial and open-source software packages
Lunt, D., Thomas, R., Roy, M., Duff, J., Atkinson, M., Frankel, P., Preuss, M. & Da Fonseca, J. Q., 2020, In: Materials Characterization. p. 110271Research output: Contribution to journal › Article › peer-review
Open AccessFile336 Downloads (Pure) -
Direct Evidence for Dynamic Phase Transformation during High Temperature Deformation in Ti-64
Quinta Da Fonseca, J., 12 Oct 2020, In: MATEC Web of Conferences.Research output: Contribution to journal › Article › peer-review
Open Access -
Direct observation of the dynamic evolution of precipitates in aluminium alloy 7021 at high strain rates via high energy synchrotron X-rays
Mirihanage, W. U., Robson, J. D., Mishra, S., Hidalgo-manrique, P., Da Fonseca, J. Q., Daniel, C. S., Prangnell, P. B., Michalik, S., Magdysyuk, O. V., Connolley, T. & Drakopoulos, M., 2 Dec 2020, (E-pub ahead of print) In: Acta Materialia. p. 116532Research output: Contribution to journal › Article › peer-review
-
Early slip activity and fatigue crack initiation of a near alpha titanium alloy
Quinta Da Fonseca, J., 12 Oct 2020, In: MATEC Web of Conferences.Research output: Contribution to journal › Article › peer-review
Open Access -
Element segregation and α2 formation in primary α of a near-α Ti-alloy
Dichtl, C., Zhang, Z., Gardner, H., Bagot, P., Radecka, A., Dye, D., Thomas, M., Sandala, R., Quinta da Fonseca, J. & Preuss, M., 15 Apr 2020, (Accepted/In press) In: Materials Characterization.Research output: Contribution to journal › Article › peer-review
-
Initial plasticity stages in Mg alloys containing Long-Period Stacking Ordered phases using High Resolution Digital Image Correlation (HRDIC) and in-situ synchrotron radiation
Garcés, G., Orozco-Caballero, A., Quinta da Fonseca, J., Pérez, P., Medina, J., Stark, A., Schell, N. & Adeva, P., 2020, In: Materials Science and Engineering A.Research output: Contribution to journal › Article › peer-review
-
Measurement of local plastic strain during uniaxial reversed loading of nickel alloy 625
Atkinson, M., Donoghue, J. & Quinta da Fonseca, J., 7 Aug 2020, (Accepted/In press) In: Materials Characterization.Research output: Contribution to journal › Article › peer-review
-
Microscopic strain localisation in WAAM Ti-6Al-4V during uniaxial tensile loading
Quinta Da Fonseca, J., 12 Oct 2020, In: MATEC Web of Conferences.Research output: Contribution to journal › Article › peer-review
Open Access -
On the Observation of Annealing Twins during Simulating β-Grain Refinement in Ti-6Al-4V High Deposition Rate AM with In-Process Deformation
Donoghue, J., Davis, A. E., Daniel, C. S., Garner, A., Martina, F., Quinta Da Fonseca, J. & Prangnell, P. B., Mar 2020, In: Acta Materialia. 186, p. 229-241 13 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Slip band characteristics in the presence of grain boundaries in nickel-based superalloy
Sperry, R., Fullwood, D. T., Harte, A., Fonseca, J. Q. D., Homer, E. R. & Wagoner, R. H., May 2020, In: Acta Materialia.Research output: Contribution to journal › Article › peer-review
Open AccessFile237 Downloads (Pure) -
Texture Evolution Under Fast Heating and Cooling Rates of Zirconium Alloys Studied In-Situ by Synchrotron X-Ray Diffraction
Nguyen, C.-T., Garner, A., Romero, J., Ambard, A., Preuss, M. & Fonseca, J. Q. D., 1 Oct 2020, In: SSRN Electronic Journal.Research output: Contribution to journal › Article › peer-review
-
The effect of loading direction on strain localisation in wire arc additively manufactured Ti–6Al–4V
Lunt, D., Ho, A., Davis, A., Harte, A., Martina, F., Quinta da Fonseca, J. & Prangnell, P., 21 May 2020, (E-pub ahead of print) In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing . 139608.Research output: Contribution to journal › Article › peer-review
Open Access -
The effect of solid solution and gamma prime on the deformation modes in Ni-based superalloys
Harte, A., Atkinson, M., Smith, A., Drouven, C., Zaefferer, S., Quinta da Fonseca, J. & Preuss, M., 15 Apr 2020, (E-pub ahead of print) In: Acta Materialia.Research output: Contribution to journal › Article › peer-review
Open Access -
The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation
Simm, T. H., Das, Y. B., Forsey, A. N., Gungor, S., Fitzpatrick, M. E., Prakash, D. G. L., Moat, R. J., Birosca, S., Quinta da Fonseca, J. & Perkins, K. M., 1 Feb 2020, In: Materials Characterization. 160, 110114.Research output: Contribution to journal › Article › peer-review
Open AccessFile69 Downloads (Pure) -
Understanding strain localisation behaviour in a near-α Ti-alloy during initial loading below the yield stress
Quinta Da Fonseca, J., 12 Oct 2020, In: MATEC Web of Conferences.Research output: Contribution to journal › Article › peer-review
Open Access -
2019
A detailed study of texture changes during alpha–beta processing of a zirconium alloy
Daniel, C. S., Honniball, P. D., Bradley, L., Preuss, M. & Quinta Da Fonseca, J., 5 Oct 2019, In: Journal of Alloys and Compounds. 804, p. 65-83Research output: Contribution to journal › Article › peer-review
Open Access -
Characterisation of irradiation enhanced strain localisation in a zirconium alloy
Thomas, R., Lunt, D., Atkinson, M., Quinta da Fonseca, J., Preuss, M., Barton, F., O'Hanlon, J. & Frankel, P., 2019, In: Acta Materialia.Research output: Contribution to journal › Article › peer-review
Open Access -
Identification of active slip mode in a hexagonal material by correlative scanning electron microscopy
Xu, X., Lunt, D., Thomas, R., Revathy Rajan, P. B., Harte, A., Atkinson, M., Quinta da Fonseca, J. & Preuss, M., 2019, In: Acta Materialia.Research output: Contribution to journal › Article › peer-review
Open Access -
On the work hardening of titanium: new insights from nanoindentation
Fitzner, A., Palmer, J., Gardner, B., Thomas, M., Preuss, M. & da Fonseca, J. Q., May 2019, In: Journal of Materials Science. 54, 10, p. 7961-7974 14 p.Research output: Contribution to journal › Article › peer-review
Open Access -
The effect of cold work on the transformation kinetics and texture of a zirconium alloy during fast thermal cycling
Nguyen, C. T., Romero, J., Ambard, A., Preuss, M. & Quinta da Fonseca, J., 11 Feb 2019, In: Materials Science and Engineering A. 746, p. 424-433 10 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile216 Downloads (Pure) -
2018
Back-stresses and geometrical hardening as competing mechanisms enhancing ductility in HCP metals
Esque-De Los Ojos, D., Nguyen, C.-T., Orozco-Caballero, A., Timar, G. & Quinta da Fonseca, J., 2018, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing .Research output: Contribution to journal › Article › peer-review
Open AccessFile226 Downloads (Pure) -
Enabling high resolution strain mapping in zirconium alloys
Lunt, D., Orozco-Caballero, A., Thomas, R., Honniball, P., Frankel, P., Preuss, M. & Quinta da Fonseca, J., 2018, In: Materials Characterization.Research output: Contribution to journal › Article › peer-review
Open AccessFile132 Downloads (Pure) -
On the ductility of alpha titanium: The effect of temperature and deformation mode
Orozco-Caballero, A., Li, F., Esque-De Los Ojos, D., Atkinson, M. & Quinta da Fonseca, J., 2018, In: Acta Materialia.Research output: Contribution to journal › Article › peer-review
Open AccessFile494 Downloads (Pure) -
Quantification of strain localisation in a bimodal two-phase titanium alloy
Lunt, D., Xu, X., Busolo, T., Quinta da Fonseca, J. & Preuss, M., 1 Mar 2018, In: Scripta Materialia. 145, p. 45-49 5 p.Research output: Contribution to journal › Article › peer-review
Open Access -
2017
Discontinuous yielding in wrought magnesium
Timár, G., Barnett, M. R. & da Fonseca, J. Q., 1 May 2017, In: Computational Materials Science. 132, p. 81-91 11 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile229 Downloads (Pure) -
Effect of nanoscale α2precipitation on strain localisation in a two-phase Ti-alloy
Lunt, D., Busolo, T., Xu, X., Quinta da Fonseca, J. & Preuss, M., 1 May 2017, In: Acta Materialia. 129, p. 72-82 11 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile362 Downloads (Pure) -
Effect of pre-existing twinning on strain localization during deformation of a magnesium alloy
Hong, X., Godfrey, A., Liu, W., Orozco-Caballero, A. & da Fonseca, J. Q., 15 Dec 2017, In: Materials Letters. 209, p. 94-96 3 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile67 Downloads (Pure) -
How magnesium accommodates local deformation incompatibility: a high-resolution digital image correlation study
Orozco-Caballero, A., Lunt, D., Robson, J. & Quinta Da Fonseca, J., 20 May 2017, In: Acta Materialia. 133, p. 367-379Research output: Contribution to journal › Article › peer-review
Open Access -
Measurement and Modelling of Textures in Flow Formed Cr-Mo-V Steel Tubes
Tsivoulas, D., Quinta Da Fonseca, J., Tuffs, M. & Preuss, M., 8 Feb 2017, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing . 685, p. 7-18Research output: Contribution to journal › Article › peer-review
Open Access -
Microscopic strain localisation in Ti-6Al-4V during uniaxial tensile loading
Lunt, D., Quinta Da Fonseca, J., Preuss, M. & Rugg, D., 5 Jan 2017, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing . 680, p. 444–453Research output: Contribution to journal › Article › peer-review
Open AccessFile228 Downloads (Pure) -
2016
An evaluation of diffraction peak profile analysis (DPPA) methods to study plastically deformed metals
Simm, T. H., Withers, P. & Quinta Da Fonseca, J., Dec 2016, In: Materials & Design. 111Research output: Contribution to journal › Article › peer-review
Open AccessFile382 Downloads (Pure) -
The effect of aluminium on twinning in binary alpha-titanium
Fitzner, A., Prakash, D. L., Quinta Da fonseca, J., Thomas, M., Zhang, S.-Y., Kelleher, J., Manuel, P. & Preuss, M., 15 Jan 2016, In: Acta Materialia. 103, p. 341-351 11 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile335 Downloads (Pure) -
The effect of loading direction and Sn alloying on the deformation modes of Zr: An in-situ neutron diffraction study
Krishna, K. M., Prakash, D. L., Timar, G., Fitzner, A., Srivastava, D., Saibaba, N., Quinta da Fonseca, J., Dey, G. & Preuss, M., 11 Nov 2016, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing . 650, p. 497-509 13 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile320 Downloads (Pure) -
2015
An experimental study of the polycrystalline plasticity of austenitic stainless steel
Di Gioacchino, F. & Quinta Da fonseca, J., 23 Jun 2015, In: International Journal of Plasticity. 74, p. 92-109 18 p.Research output: Contribution to journal › Article › peer-review
-
Effects of flow forming parameters on the development of residual stresses in Cr-Mo-V steel tubes
Tsivoulas, D., Quinta da Fonseca, J., Tuffs, M. & Preuss, M., 29 Jan 2015, In: Materials Science and Engineering: A. 624, p. 193-202 10 p.Research output: Contribution to journal › Article › peer-review