Michael Smith

2023

Residual stresses in austenitic thin-walled pipe girth welds: Manufacture and measurements

Hosseinzadeh, F., Tafazzoli-Moghaddam, B., Kim, H. K., Bouchard, P. J., Akrivos, V., Vasileiou, A. N. & Smith, M. C., 1 Dec 2023, In: International Journal of Pressure Vessels and Piping. 206, 105016.

Research output: Contribution to journal › Article › peer-review

Open Access

Residual stress prediction of arc welded austenitic pipes with artificial neural network ensemble using experimental data

Rissaki, D., Benardos, P. G., Vosniakos, G.-C., Smith, M. C. & Vasileiou, A., 1 Aug 2023, In: International Journal of Pressure Vessels and Piping. 204, 104954.

Research output: Contribution to journal › Article › peer-review

Open Access

2022

A Fundamental Analysis of Factors Affecting Chemical Homogeneity in the Laser Powder Bed Fusion Process

Flint, T., Anderson, M. .. J., Akrivos, V., Roy, M., Francis, J., Vasileiou, A. & Smith, M., 27 Apr 2022, (Accepted/In press) In: International Journal of Heat and Mass Transfer.

Research output: Contribution to journal › Article › peer-review

beamWeldFoam: Numerical Simulation of High Energy Density Fusion and Vapourisation-Inducing Processes

Flint, T., Parivendhan, G., Ivankovic, A., Smith, M. & Cardiff, P., 24 Mar 2022, (Accepted/In press) In: SoftwareX.

Research output: Contribution to journal › Article › peer-review

On the Accurate Prediction of Residual Stress in a Three-Pass Slot Nickel-Base Repair Weld by Numerical Simulations

Akrivos, V., Muransky, O., Depradeux, L., Smith, M., Vasileiou, A., Deaconu, V. & Kapadia, P., 1 Jun 2022, In: Journal of Manufacturing and Materials Processing. 6, 3, 61.

Research output: Contribution to journal › Article › peer-review

Open Access

2021

Development of microstructure and residual stresses in electron beam welds in low alloy pressure vessel steels

Vasileiou, A., Smith, M., Francis, J., Balakrishnan, J., Wang, Y. L., Obasi, G., Burke, M. G., Pickering, E., Gandy, D. & Irvine, N., 20 Jun 2021, (Accepted/In press) In: Materials & Design.

Research output: Contribution to journal › Article › peer-review

Magneto-hydrodynamics of multi-phase flows in heterogeneous systems with large property gradients: Multi-Component multi-phase magnetohydrodynamics

Flint, T., Shanthraj, P. & Smith, M., 23 Sept 2021, In: Scientific Reports. 11, 1, p. 1-15 15 p., 18998.

Research output: Contribution to journal › Article › peer-review

Open Access

File

194 Downloads (Pure)

2019

A Semi-Analytical Solution for the Transient Temperature Field Generated by a Volumetric Heat Source Developed for the Simulation of Friction Stir Welding

Flint, T., Francis, J. & Smith, M., Apr 2019, In: International Journal of Thermal Sciences. 138, p. 586-595 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Effects of dilution on alloy content and microstructure in multi-pass steel welds

Sun, Y. L., Obasi, G., Hamelin, C. J., Vasileiou, A. N., Flint, T. F., Balakrishnan, J., Smith, M. C. & Francis, J., 1 Mar 2019, In: Journal of Materials Processing Technology. 265, p. 71-86 16 p.

Research output: Contribution to journal › Article › peer-review

Open Access

HEDSATS: High Energy Density Semi-Analytical Thermal Solutions

Flint, T. & Smith, M., 7 May 2019, (E-pub ahead of print) In: SoftwareX.

Research output: Contribution to journal › Article › peer-review

Open Access

Measurement and Prediction of Phase Transformation Kinetics in a Nuclear Steel During Rapid Thermal Cycles

Obasi, G., Pickering, E., Vasileiou, A., Sun, Y., Rathod, D., Preuss, M., Francis, J. & Smith, M., 4 Feb 2019, In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 50, 4, p. 1715-1731 17 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Phase-Field Simulation of Grain Boundary Evolution In Microstructures Containing Second-Phase Particles with Heterogeneous Thermal Properties

Flint, T., Sun, Y., Xiong, Q., Smith, M. & Francis, J., 5 Dec 2019, In: Scientific Reports. 9, 18426.

Research output: Contribution to journal › Article › peer-review

Open Access

Residual stresses in arc and electron-beam welds in 130 mm thick SA508 steel: Part 1 - Manufacture

Rathod, D., Francis, J., Vasileiou, A., Roy, M., English, P., Balakrishnan, J., Smith, M. & Irvine, N., 2019, In: International Journal of Pressure Vessels and Piping. 172, p. 313-328 16 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

193 Downloads (Pure)

Residual stresses in arc and electron-beam welds in 130 mm thick SA508 steel: Part 2 –measurements

Vasileiou, A., Smith, M., Francis, J., Rathod, D., Balakrishnan, J. & Irvine, N., 2019, In: International Journal of Pressure Vessels and Piping. 172, p. 379-390 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

70 Downloads (Pure)

Vacuum Laser Welding of SA508 Steel

Francis, J., Holtum, N., Olschok, S., Roy, M., Vasileiou, A., Jakobs, S., Reisgen, U. & Smith, M., 18 Jun 2019, In: Journal of Materials Processing Technology. 274, 116269.

Research output: Contribution to journal › Article › peer-review

Open Access

Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 1: Mock-up manufacture, residual stress measurements, and materials characterisation

Smith, M. (Corresponding), Muránsky, O., Xiong, Q., Bouchard, P. J., Mathew, J. & Austin, C., 2019, In: International Journal of Pressure Vessels and Piping.

Research output: Contribution to journal › Article › peer-review

Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 2: Modelling and validation

Xiong, Q., Smith, M., Muránsky, O. & Mathew, J., 2019, In: International Journal of Pressure Vessels and Piping.

Research output: Contribution to journal › Article › peer-review

2018

Advances in weld residual stress prediction: A review of the NeT TG4 simulation round robins part 2, mechanical analyses

Smith, M. C. & Smith, A. C., 2018, In: International Journal of Pressure Vessels and Piping.

Research output: Contribution to journal › Article › peer-review

Optimised modelling of AISI 316L(N) material behaviour in the NeT TG4 international weld simulation and measurement benchmark

Smith, M. C., Muránsky, O., Austin, C., Bendeich, P. & Xiong, Q., Jul 2018, In: International Journal of Pressure Vessels and Piping. 164

Research output: Contribution to journal › Article › peer-review

Prediction of grain structure evolution during rapid solidification of high energy density beam induced re-melting

Flint, T. F., Panwisawas, C., Sovani, Y., Smith, M. C. & Basoalto, H. C., 5 Jun 2018, In: Materials & Design. 147, p. 200-210 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

531 Downloads (Pure)

Residual Stress Distributions in Arc, Laser and Electron-Beam Welds in 30 mm Thick SA508 Steel: A Cross-Process Comparison

Balakrishnan, J., Vasileiou, A., Francis, J., Smith, M., Roy, M., Callaghan, M. D. & Irvine, N., May 2018, In: International Journal of Pressure Vessels and Piping. 162, p. 59-70 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

341 Downloads (Pure)

Semi-Analytical Solutions for the Transient Temperature Fields Induced by a Moving Heat Source in an Orthogonal Domain

Flint, T., Francis, J., Smith, M. & Vasileiou, A., 2018, In: International Journal of Thermal Sciences. 123

Research output: Contribution to journal › Article › peer-review

Open Access

2017

Advances in weld residual stress prediction: A review of the NeT TG4 simulation round robin part 1, thermal analyses

Smith, M. C. & Smith, A. C., 2017, In: International Journal of Pressure Vessels and Piping.

Research output: Contribution to journal › Article › peer-review

An Evaluation of Multipass Narrow Gap Laser Welding as a Candidate Process for the Manufacture of Nuclear Pressure Vessels

Feng, J. C., Rathod, D. W., Roy, M., Francis, J., Guo, W., Irvine, N., Vasileiou, A., Sun, Y. L., Smith, M. & Li, L., 14 Sept 2017, (E-pub ahead of print) In: International Journal of Pressure Vessels and Piping. 157

Research output: Contribution to journal › Article › peer-review

Open Access

File

366 Downloads (Pure)

Evaluation of errors associated with cutting-induced plasticity in residual stress measurements using the contour method

Sun, Y., Roy, M., Vasileiou, A., Smith, M., Francis, J. & Hosseinzadeh, F., Jun 2017, In: Experimental Mechanics. 57, 5, p. 719-734 16 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91

Javadi, Y., Smith, M., Venkata, K. A., Naveed, N., Forsey, A., Francis, J., Ainsworth, R., Truman, C. E., Smith, D. J., Hosseinzadeh, F., Gungor, S., Bouchard, P. J., Dey, H. C., Bhaduri, A. K. & Mahadevan, S., 2017, In: International Journal of Pressure Vessels and Piping.

Research output: Contribution to journal › Article › peer-review

Open Access

The impact of transformation plasticity on the electron beam welding of thick-section ferritic steel components

Vasileiou, A., Smith, M., Jeyaganesh, B., Francis, J. A. & Hamelin, C. J., 17 Apr 2017, In: Nuclear Engineering and Design. 323, 0, p. 309-316

Research output: Contribution to journal › Article › peer-review

Open Access

The NeT Task Group 4 residual stress measurement and analysis round robin on a three-pass slot-welded plate specimen

Smith, M. C., Smith, A. C., Ohms, C. & Wimpory, R. C., 2017, In: International Journal of Pressure Vessels and Piping.

Research output: Contribution to journal › Article › peer-review

Open Access

2014

A review of the NeT Task Group 1 residual stress measurement and analysis round robin on a single weld bead-on-plate specimen

Smith, M., Smith, M. C., Smith, A. C., Wimpory, R. & Ohms, C., 2014, In: International Journal of Pressure Vessels and Piping. 120–121, 0, p. 93-140 48 p.

Research output: Contribution to journal › Article › peer-review

Numerical analysis of retained residual stresses in C(T) specimen extracted from a multi-pass austenitic weld and their effect on crack growth

Muránsky, O., Smith, M. C., Bendeich, P. J., Hosseinzadeh, F. & Edwards, L., 2014, In: Engineering Fracture Mechanics. 126, 0, p. 40-53 14 p.

Research output: Contribution to journal › Article › peer-review

Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments

Hamelin, C. J., Muránsky, O., Smith, M. C., Holden, T. M., Luzin, V., Bendeich, P. J. & Edwards, L., 2014, In: Acta Materialia. 75, 0, p. 1-19 19 p.

Research output: Contribution to journal › Article › peer-review

2012

Accurate prediction of residual stress in stainless steel welds

Smith, M. C., Bouchard, P. J., Turski, M., Edwards, L. & Dennis, R. J., Mar 2012, In: Computational Materials Science. 54, 1, p. 312-328 17 p.

Research output: Contribution to journal › Article › peer-review

Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements

Muransky, O., Smith, M. C., Bendeich, P. J., Holden, T. M., Luzin, V., Martins, R. V. & Edwards, L., 1 May 2012, In: International Journal of Solids and Structures. 49, 9, p. 1045-1062 18 p.

Research output: Contribution to journal › Article › peer-review

Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements, International Journal of Solids a

Edwards, L., Smith, M., Muransky, O., Bendeich, P. J., Martins, R. V., Holden, T. M. & Luzin, V., 2012, In: International Journal of Solids and Structures. 49, 0, p. 1045-1062 17 p.

Research output: Contribution to journal › Article › peer-review

Natural crack growth analyses for circumferential and axial PWSCC defects in dissimilar metal welds

Shim, D. J., Kalyanam, S., Brust, F., Wilkowski, G., Smith, M. & Goodfellow, A., 2012, In: Journal of Pressure Vessel Technology, Transactions of the ASME. 134, 5, 51402.

Research output: Contribution to journal › Article › peer-review

The effect of plasticity theory on predicted residual stress fields in numerical weld analyses

Muransky, O., Hamelin, C. J., Smith, M. C., Bendeich, P. J. & Edwards, L., Mar 2012, In: Computational Materials Science. 54, 1, p. 125-134 10 p.

Research output: Contribution to journal › Article › peer-review

Validated numerical analysis of residual stresses in safety relief valve (SRV) nozzle mock-ups: influence of axial restraint on distortion and residual stress predictions

Bendeich, P. J., Muransky, O., Hamelin, C. J., Smith, M. C. & Edwards, L., 2012, In: Computational Materials Science. 62, p. 285-288 4 p.

Research output: Contribution to journal › Article › peer-review

2011

Measurement of residual stresses within a PWR swaged heater tube

Goudar, D. M., Kingston, E. J., Smith, M. & Hossain, S., 2011, In: Applied Mechanics and Materials, AMM. 70, 0, p. 279-284 5 p.

Research output: Contribution to journal › Article › peer-review

Modelling and statistical treatment of residual stress distributions in an edge-welded stainless steel beam

Smith, M., Nadri, B., Bouchard, P. J., Smith, M. C., Truman, C. E. & Smith, D. J., 2011, In: Strain. 47, p. 505-517 13 p.

Research output: Contribution to journal › Article › peer-review

Validated numerical analysis of residual stresses in Safety Relief Valve (SRV) nozzle mock-ups

Muransky, O., Smith, M. C., Bendeich, P. J. & Edwards, L., May 2011, In: Computational Materials Science. 50, 7, p. 2203-2215 13 p.

Research output: Contribution to journal › Article › peer-review

2009

NeT bead on plate round robin: Comparison of residual stress predictions and measurements

Smith, M., Smith, M. C. & Smith, A. C., 2009, In: International Journal of Pressure Vessels and Piping. 86, 1, p. 79-95 17 p.

Research output: Contribution to journal › Article › peer-review

NeT bead on plate round robin: Comparison of transient thermal predictions and measurements

Smith, M., Smith, M. C. & Smith, A. C., 2009, In: International Journal of Pressure Vessels and Piping. 86, 1, p. 96-109 14 p.

Research output: Contribution to journal › Article › peer-review

NeT bead on plate round robin: Comparison of transient thermal predictions and measurements

Smith, A. C. & Smith, M., 2009, In: Journal of Nuclear Materials. 86, 1, p. 96-109 13 p.

Research output: Contribution to journal › Article › peer-review

Spatially Resolved Materials Property Data from a Uniaxial Cross-weld Tensile Test

Edwards, L., Turski, M., Smith, M. C., Bouchard, P. J. & Withers, P., 2009, In: Journal of Pressure Vessel Technology. 131, 6

Research output: Contribution to journal › Article › peer-review

The NeT residual stress measurement and analysis round robin on a single weld bead-on-plate specimen

Truman, C. E. & Smith, M. C., 2009, In: International Journal of Pressure Vessels and Piping. 86, 1, p. 1-2 2 p.

Research output: Contribution to journal › Article › peer-review

2008

Interaction of residual stress with mechanical loading in an austenitic stainless steel

Smith, M., Mirzaee-Sisan, A., Truman, C. E., Smith, D. J. & Smith, M. C., 2008, In: Fatigue and Fracture of Engineering Materials and Structures. 31, 3, p. 223-233 11 p.

Research output: Contribution to journal › Article › peer-review

The effect of specimen dimensions on mixed mode ductile fracture

Smith, D. J., Pavier, M. J., Smith, M. & Swankie, T. D., 2008, In: Engineering Fracture Mechanics. 75, 15, p. 4394-4409 16 p.

Research output: Contribution to journal › Article › peer-review

2007

Interaction of residual stress with mechanical loading in a ferritic steel

Smith, M., Mirzaee-Sisan, A., Truman, C. E., Smith, D. J. & Smith, M. C., 2007, In: Engineering Fracture Mechanics. 74, p. 2864-2880 17 p.

Research output: Contribution to journal › Article › peer-review

Interaction of residual stress with mechanical loading in a ferritic steel

Mirzaee-Sisan, A. E., Truman, C. E., Smith, D. J. & Smith, M., 2007, In: Fatigue and Fracture of Engineering Materials and Structures. 74, 17, p. 2864-2880 16 p.

Research output: Contribution to journal › Article › peer-review

2005

Three Dimensional Multi-Pass Repair Weld Simulations

Elcoate, C. D., Dennis, R. J., Bouchard, P. J. & Smith, M. C., 2005, In: International Journal of Pressure Vessels and Piping. 82, 4, p. 244-257 13 p.

Research output: Contribution to journal › Article › peer-review

Michael Smith, PhD

Research output

Search results