Research output per year
Research output per year
- 1 - 50 out of 269 results
Search results
-
2021
Assessing the Superhydrophobic Performance of Laser Micropatterned Aluminium Overhead Line Conductor Material
Lian, C., Emersic, C., Rajab, F. H., Cotton, I., Zhang, X., Lowndes, R. & Li, L., 17 Apr 2021, (Accepted/In press) In: IEEE Transactions on Power Delivery.Research output: Contribution to journal › Article › peer-review
-
Femtosecond laser single step, full depth cutting of thick silicon sheets with low surface roughness
Li, Z., Allegre, O., Li, Q., Guo, W. & Li, L., 23 Jan 2021, In: Optics and Laser Technology. 138, 106899.Research output: Contribution to journal › Article › peer-review
-
Recent progress and scientific challenges in multi-material additive manufacturing via laser-based powder bed fusion
Wei, C. & Li, L., 25 May 2021, In: Virtual and Physical Prototyping. p. 1-25Research output: Contribution to journal › Article › peer-review
-
Stealth dicing of sapphire sheets with low surface roughness, zero kerf width, debris/crack-free and zero taper using a femtosecond Bessel beam
Li, Z., Wang, X., Wang, J., Allegre, O., Guo, W., Gao, W., Jia, N. & Li, L., Mar 2021, In: Optics and Laser Technology. 135, 106713.Research output: Contribution to journal › Article › peer-review
-
Understanding the behaviour of workpieces' bulk temperature during laser-assisted turning of Ti6Al4V alloy and heating of Al-SiC metal-matrix composite rods
Wei, C., Guo, W., Gao, B., Wang, Y., Sun, Z. & Li, L., 12 Feb 2021, In: Optics & Laser Technology. 139, p. 106951Research output: Contribution to journal › Article › peer-review
Open AccessFile107 Downloads (Pure) -
2020
Additive Manufacturing of Polymer-Metal/Ceramic Functionally Graded Composite Components via Multiple Material Laser Powder Bed Fusion
Chueh, Y.-H., Zhang, X., Wei, C., Sun, Z. & Li, L., 1 May 2020, In: Journal of Manufacturing Science and Engineering. 142, 5Research output: Contribution to journal › Article › peer-review
-
Additive manufacturing of three-dimensional metal-glass functionally gradient material components by laser powder bed fusion with in situ powder mixing
Zhang, X., Chueh, Y.-H., Wei, C., Sun, Z., Yan, J. & Li, L., 1 May 2020, In: Additive Manufacturing. 33, p. 101113Research output: Contribution to journal › Article › peer-review
-
Debris-free, Zero Taper Cutting of BOROFLOAT 33 Glass Using a Femtosecond Bessel Laser Beam
Li, Z., Wang, J.-L., Wang, X.-F., Allegre, O., Guo, W., Gao, W.-Y., Xue, Y. & Li, L., 1 Jan 2020, In: Lasers in Engineering.Research output: Contribution to journal › Article › peer-review
Open AccessFile171 Downloads (Pure) -
Debris-free Cutting of Quartz with Zero Kerf Width and Ultra-low Surface Roughness Using Femtosecond Bessel Laser Beam Filamentation
Li, Z., Guo, W., Allegre, O., Liu, C.-G., Gao, W.-Y., Wang, X.-F., Hou, Z.-X., Li, K., Zhang, L. & Li, L., 1 Jun 2020, In: Lasers in Engineering.Research output: Contribution to journal › Article › peer-review
Open AccessFile268 Downloads (Pure) -
High speed, high power density laser-assisted machining of Al-SiC metal matrix composite with significant increase in productivity and surface quality
Wei, C., Guo, W., Pratomo, E. S., Li, Q., Wang, D., Whitehead, D. & Li, L., 1 Nov 2020, In: Journal of Materials Processing Technology . 285, 116784.Research output: Contribution to journal › Article › peer-review
Open AccessFile85 Downloads (Pure) -
Hybrid ultrasonic and mini-motor vibration-induced irregularly shaped powder delivery for multiple materials additive manufacturing
Wei, C., Gu, H., Zhang, X., Chueh, Y.-H. & Li, L., 1 May 2020, In: Additive Manufacturing. 33, p. 101138Research output: Contribution to journal › Article › peer-review
-
In-process measurement of melt pool cross-sectional geometry and grain orientation in a laser directed energy deposition additive manufacturing process
Sun, Z., Guo, W. & Li, L., 1 Sept 2020, In: Optics and Laser Technology. 129, p. 106280Research output: Contribution to journal › Article › peer-review
Open AccessFile421 Downloads (Pure) -
Integrated laser-based powder bed fusion and fused filament fabrication for three-dimensional printing of hybrid metal/polymer objects
Chueh, Y.-H., Wei, C., Zhang, X. & Li, L., 1 Jan 2020, In: Additive Manufacturing. 31, p. 100928Research output: Contribution to journal › Article › peer-review
Open Access -
Laser assisted solution synthesis of high performance graphene supported electrocatalysts
Peng, Y., Cao, J., Yang, J., Yang, W., Li, X., Dryfe, R., Li, L., Kinloch, I. & Liu, Z., 25 Jun 2020, In: Advanced Functional Materials. 30, 2, 2001756.Research output: Contribution to journal › Article › peer-review
Open AccessFile102 Downloads (Pure) -
Laser-induced backward transfer of conducting aluminum doped zinc oxide to glass for single-step rapid patterning
Ding, C.-F., Li, L. & Young, H.-T., 1 Jan 2020, In: Journal of Materials Processing Technology . 275, p. 116357Research output: Contribution to journal › Article › peer-review
Open Access -
Multi-physics modelling of molten pool development and track formation in multi-track, multi-layer and multi-material selective laser melting
Gu, H., Wei, C., Li, L., Han, Q., Setchi, R., Ryan, M. & Li, Q., 1 Apr 2020, In: International Journal of Heat and Mass Transfer. 151, p. 119458Research output: Contribution to journal › Article › peer-review
-
Numerical and experimental study on the molten pool dynamics and fusion zone formation in multi-pass narrow gap laser welding
Gu, H., Väistö, T. & Li, L., 1 Jun 2020, In: Optics and Laser Technology. 126, p. 106081Research output: Contribution to journal › Article › peer-review
-
Rapid growth of large area graphene on glass from olive oil by laser irradiation
Huang, Y., Sepioni, M., Whitehead, D., Liu, Z., Guo, W., Zhong, X., Gu, H. & Li, L., 27 Mar 2020, In: Nanotechnology. 31, 24, p. 245601 245601.Research output: Contribution to journal › Article › peer-review
Open Access -
Significant Reduction in Energy Consumption and Carbon Emission While Improving Productivity in Laser Drilling of CFRP Sheets with a Novel Stepped Process Parameter Parallel Ring Method
Zhu, M., Wei, C., Guo, W., Zhang, Z., Ouyang, J., Mativenga, P. & Li, L., 5 Jan 2020, In: Journal of Manufacturing and Materials Processing. 6, 1, 7.Research output: Contribution to journal › Article › peer-review
Open Access -
Silicon nanoparticle generation and deposition on glass from waste silicon powder by nanosecond pulsed laser irradiation
Momoki, K., Manabe, T., Li, L. & Yan, J., 1 Jun 2020, In: Materials science in semiconductor processing. 111, p. 104998Research output: Contribution to journal › Article › peer-review
-
Stable Wearable Strain Sensors on Textiles by Direct Laser Writing of Graphene
Liu, W., Huang, Y., Peng, Y., Walczak, M., Wang, D., Chen, Q., Liu, Z. & Li, L., 24 Jan 2020, In: ACS Applied Nano Materials. 3, 1, p. 283-293Research output: Contribution to journal › Article › peer-review
Open AccessFile118 Downloads (Pure) -
The Application of Mid-Side Theory to Produce Analog Stereo Audio Records Using a Single Laser Beam
Wilson, D., Allegre, O., Heinemann, R., Orchid, S. & Whitehead, D., 12 May 2020, In: Journal of the Audio Engineering Society. 68, 4Research output: Contribution to journal › Article › peer-review
Open AccessFile425 Downloads (Pure) -
Ultrafast Laser Drilling of Crack-free, Debris-free and Heat Affected Zone (HAZ)-free Blind Holes in Al2O3 with Flat Bottom and Reduced Taper Angles
Li, Z., Allegre, O., Guo, W., Gao, W.-Y., Li, B.-H., Feng, Q.-L., Wu, X.-P. & Li, L., 2020, In: Lasers in Engineering. p. 367-381 15 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile309 Downloads (Pure) -
2019
A 2D Mesh-free Simulation of the Particle Adhesion in a Plastic Cyclone
Zhou, Y., See, T., Zhong, S., Liu, Z. & Li, L., Jan 2019, In: Institution of Mechanical Engineers. Proceedings. Part C: Journal of Mechanical Engineering Science. 233, 2, p. 649-663 15 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile286 Downloads (Pure) -
Additive Manufacturing of Horizontal and 3D Functionally Graded 316L/Cu10Sn Components via Multiple Material Selective Laser Melting
Wei, C., Sun, Z., Chen, Q., Liu, Z. & Li, L., 1 Aug 2019, In: Journal of Manufacturing Science and Engineering. 141, 8Research output: Contribution to journal › Article › peer-review
-
Computational fluid dynamic simulation of gravity and pressure effects in laser metal deposition for potential additive manufacturing in space
Gu, H. & Li, L., 1 Sept 2019, In: International Journal of Heat and Mass Transfer. 140, p. 51-65Research output: Contribution to journal › Article › peer-review
-
Controlling bacteria retention on polymer via replication of laser micro/nano textured metal mould
Rajab, F. H., Liu, Z., Wang, T. & Li, L., Apr 2019, In: Optics and Laser Technology. 111, p. 530-536 7 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile291 Downloads (Pure) -
Effect of laser shock peening on wear behaviors of TC11 alloy at elevated temperature
Tong, Z. P., Ren, X. D., Zhou, W. F., Adu-gyamfi, S., Chen, L., Ye, Y. X., Ren, Y. P., Dai, F. Z., Yang, J. D. & Li, L., 1 Jan 2019, In: Optics and Laser Technology. 109, p. 139-148Research output: Contribution to journal › Article › peer-review
-
Effect of the Pillar Size on the Electrochemical Performance of Laser-Induced Silicon Micropillars as Anodes for Lithium-Ion Batteries
Yang, X., Tachikawa, N., Katayama, Y., Li, L. & Yan, J., 3 Sept 2019, In: Applied Sciences. 9, 17, p. 3623Research output: Contribution to journal › Article › peer-review
Open Access -
Effect of water-based ultrasonic vibration on the quality of laser trepanned microholes in nickel super-alloy workpieces
Wang, H., Li, L., Zhu, S., Xu, Y. & Ren, N., 1 Oct 2019, In: Journal of Materials Processing Technology . 272, p. 170-183Research output: Contribution to journal › Article › peer-review
-
How did the structural ZnO nanowire as antibacterial coatings control the switchable wettability
Rajab, F. H., Korshed, P., Liu, Z., Wang, T. & Li, L., 1 Mar 2019, In: Applied Surface Science. 469, p. 593-606 14 p.Research output: Contribution to journal › Article › peer-review
-
Laser induced molybdenum sulphide loading on doped graphene cathode for highly stable lithium sulphur battery
Huang, Y., Chen, Q., Peng, Y., Zhao, H., Liu, Z. & Li, L., 6 Dec 2019, In: Communications Chemistry. 2, 0, 138.Research output: Contribution to journal › Article › peer-review
Open AccessFile127 Downloads (Pure) -
Long term superhydrophobic and hybrid superhydrophobic/superhydrophilic surfaces produced by laser surface micro/nano surface structuring
Rajab, F. H., Liu, Z. & Li, L., 1 Feb 2019, In: Applied Surface Science. 466, p. 808-821Research output: Contribution to journal › Article › peer-review
Open AccessFile362 Downloads (Pure) -
Over 1000‐Fold Enhancement of the Unidirectional Photoluminescence from a Microsphere‐Cavity‐Array‐Capped QD/PDMS Composite Film for Flexible Lighting and Displays
Yang, L., Li, L., Wang, Q., Xing, C., Ma, L., Zeng, Y., Zhao, Y. & Yan, Y., 1 Dec 2019, In: Advanced Optical Materials. 7, 24, p. 1901228Research output: Contribution to journal › Article › peer-review
Open Access -
Size-dependent antibacterial activity for laser generated silver nanoparticles
Korshed, P., Li, L., Liu, Z., Mironov, A. & Wang, T., 2019, In: Journal of Interdisciplinary Nanomedicine.Research output: Contribution to journal › Article › peer-review
Open Access -
Tailored laser vector fields for high-precision micro-manufacturing
Allegre, O. J., Li, Z. & Li, L., 2019, In: CIRP Annals.Research output: Contribution to journal › Article › peer-review
-
Ultrasonic material dispensing-based selective laser melting for 3D printing of metallic components and the effect of powder compression
Wei, C., Gu, H., Sun, Z., Cheng, D., Chueh, Y.-H., Zhang, X., Huang, Y. & Li, L., 1 Oct 2019, In: Additive Manufacturing. 29, p. 100818Research output: Contribution to journal › Article › peer-review
-
2018
3D printing of multiple metallic materials via modified selective laser melting
Wei, C., Li, L., Zhang, X. & Chueh, Y. H., 2018, In: CIRP Annals. 67, 1, p. 245-248 4 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile1019 Downloads (Pure) -
Advances in macro-scale laser processing
Schmidt, M., Zäh, M., Li, L., Duflou, J., Overmeyer, L. & Vollertsen, F., 2018, In: CIRP Annals. 67, 2, p. 719-742Research output: Contribution to journal › Article › peer-review
-
A massive reduction of dust particle adhesion in a cyclone by the introduction of a wedge
Zhou, Y., See, T., Zhong, S., Liu, Z. & Li, L., 1 Sept 2018, In: Institution of Mechanical Engineers. Proceedings. Part C: Journal of Mechanical Engineering Science. 232, 17, p. 3102-3114 13 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile273 Downloads (Pure) -
An Integrated Dual Ultrasonic Selective Powder Dispensing Platform for Three-Dimensional Printing of Multiple Material Metal/Glass Objects in Selective Laser Melting
Zhang, X., Wei, C., Chueh, Y.-H. & Li, L., 10 Oct 2018, In: Journal of Manufacturing Science and Engineering. 141, 1, p. 011003 011003.Research output: Contribution to journal › Article › peer-review
Open AccessFile401 Downloads (Pure) -
Antibacterial mechanisms of a novel type picosecond laser-generated silver-titanium nanoparticles and their toxicity to human cells
Korshed, P., Li, L., Liu, Z., Mironov, A. & Wang, T., 2018, In: International Journal of Nanomedicine. 13, p. 89-101 13 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Corrosion behaviour of laser-cleaned AA7024 aluminium alloy
Zhang, F. D., Liu, H., Subka, C., Liu, Y., Liu, Z., Guo, W., Cheng, Y. M., Zhong, S. & Li, L., 30 Mar 2018, In: Applied Surface Science. 435, p. 452-461 10 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile707 Downloads (Pure) -
Effect of Storage Conditions on the Long-Term Stability of Bactericidal Effects for Laser Generated Silver Nanoparticles
Korshed, P., Li, L., Ngo, D.-T. & Wang, T., 4 Apr 2018, In: Nanomaterials.Research output: Contribution to journal › Article › peer-review
Open Access -
Embedding anti-counterfeiting features in metallic components via multiple material additive manufacturing
Wei, C., Sun, Z., Huang, Y. & Li, L., Dec 2018, In: Additive Manufacturing. 24, p. 1-12Research output: Contribution to journal › Article › peer-review
Open AccessFile425 Downloads (Pure) -
High temperature wear performance of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy subjected to laser shock peening
Ren, X., Tong, Z., Zhou, W., Chen, L., Ren, Y., Dai, F., Ye, Y., Adu-gyamfi, S., Yang, J. & Li, L., 12 Dec 2018, In: Materials Science and Technology. 34, 18, p. 2294-2304Research output: Contribution to journal › Article › peer-review
-
Influence of ultrasonic vibration on percussion drilling performance for millisecond pulsed Nd: YAG laser
Wang, H., Zhu, S., Xu, G., Zhou, W., Li, L., Zhang, D. H., Ren, N., Xia, K. & Shi, C., Aug 2018, In: Optics and Laser Technology. 104, p. 133-139 7 p.Research output: Contribution to journal › Article › peer-review
-
Investigation of the thermal and optical performance of a Spatial Light Modulator with high average power picosecond laser exposure for Materials Processing Applications
Zhu, G., Whitehead, D., Perrie, W., Allegre, O., Volle, V., Li, Q., Tang, Y., Dawson, K., Jin, Y., Edwardson, S., Li, L. & Dearden, G., 2018, In: Journal of Physics D: Applied Physics.Research output: Contribution to journal › Article › peer-review
Open AccessFile308 Downloads (Pure) -
Picosecond laser treatment production of hierarchical structured stainless steel to reduce bacterial fouling
Rajab, F. H., Liauw, C. M., Benson, P. S., Li, L. & Whitehead, K. A., May 2018, In: Food and Bioproducts Processing. 109, p. 29-40 12 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Production of stable superhydrophilic surfaces on 316L steel by simultaneous laser texturing and SiO2 deposition
Rajab, F., Liu, Z. & Li, L., Jan 2018, In: Applied Surface Science. 427, p. 1135-1145 11 p.Research output: Contribution to journal › Article › peer-review