LightForm: Embedding Materials Engineering in Manufacturing with Light Alloys

Research output

Research output per year 2017 2019 2020 2025

• 126 Article
• 1 Chapter
• 1 Conference contribution
• 1 Paper
• 2 More
  • 1 Review article
  • 1 Special issue

Research output per year

Research output per year

Search results

• 2020

  Corrosion protection mechanism of 2-mercaptobenzothiazole and its potential synergistic effect with cerium ions for treatment of AA 2024-T3

  Balaskas, A. C., Curioni, M. & Thompson, G. E., 17 Mar 2020, (E-pub ahead of print) In: Journal of Electroanalytical Chemistry. 863, p. 114081

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  63 Downloads (Pure)

• Corrosion Testing of Anodized Aerospace Alloys: Comparison between Immersion and Salt Spray Testing using Electrochemical Impedance Spectroscopy

  Usman, B. J., Scenini, F. & Curioni, M., 21 Feb 2020, In: Journal of the Electrochemical Society.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aerospace Alloy 100%
  • Corrosion Monitoring 100%
  • Dielectric Spectroscopy 100%
  • Salt Spray 100%
  • Film 50%

• Deformation Enhanced Diffusion in Aluminium Alloys

  Robson, J. D., 18 Aug 2020, (E-pub ahead of print) In: Metallurgical and Materials Transactions A. 51, 10, p. 5401-5413

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Strain Rate 100%
  • Enhanced Diffusion 100%
  • Induced Deformation 100%
  • Excess Vacancy 100%
  • Aluminum Alloys 100%

• Direct Evidence for Dynamic Phase Transformation during High Temperature Deformation in Ti-64

  Quinta Da Fonseca, J., 12 Oct 2020, In: MATEC Web of Conferences.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Direct observation of the dynamic evolution of precipitates in aluminium alloy 7021 at high strain rates via high energy synchrotron X-rays

  Mirihanage, W. U., Robson, J. D., Mishra, S., Hidalgo-manrique, P., Da Fonseca, J. Q., Daniel, C. S., Prangnell, P. B., Michalik, S., Magdysyuk, O. V., Connolley, T. & Drakopoulos, M., 2 Dec 2020, (E-pub ahead of print) In: Acta Materialia. p. 116532

  Research output: Contribution to journal › Article › peer-review

  • High Strain Rate 100%
  • Direct Observation 100%
  • Strain Rate 100%
  • Aluminum Alloys 100%
  • Al Alloy 66%

• Early slip activity and fatigue crack initiation of a near alpha titanium alloy

  Quinta Da Fonseca, J., 12 Oct 2020, In: MATEC Web of Conferences.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development

  Robson, J., 2020, In: Journal of Materials.

  Research output: Contribution to journal › Article › peer-review

  • Magnesium Alloy 100%
  • Tomography 50%
  • Microscopy 50%
  • Magnesium 50%
  • Metallurgy 50%

• Environmental Cracking Performance of New Generation Thick Plate 7000-T7x series Alloys in Humid Air

  Schwarzenböck, E., Ollivier, E., Garner, A., Cassell, A., Hack, T., Barrett, Z., Engel, C., Burnett, T., Holroyd, N., Robson, J. & Prangnell, P., 22 Apr 2020, (Accepted/In press) In: Corrosion Science.

  Research output: Contribution to journal › Article › peer-review

  • Environmental Cracking 100%

• Exploring the Use of an AC-DC-AC Technique for the Evaluation of Anticorrosion Performance of Anodic Films on Aluminium Alloys

  Usman, B. J., Scenini, F. & Curioni, M., 1 Jul 2020, In: Progress in Organic Coatings. 144, 105648.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Longer Term 100%
  • Corrosion Behavior 100%
  • Testing Method 100%

• Filiform corrosion behaviour on machined AA7150 aluminium alloy

  Liu, B., Zhou, X. & Zhang, X., 10 Sept 2020, (E-pub ahead of print) In: Nonferrous Metals Society of China. Transactions. 30, 8, p. 2056-2066

  Research output: Contribution to journal › Article › peer-review

  • Filiform Corrosion 100%
  • Aluminum Alloys 100%
  • Microstructure 100%
  • Corrosion Behavior 100%
  • Machining 75%

• Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution

  Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., Robson, J. D., Deschamps, A. & Withers, P. J., 2020, In: Progress In Materials Science. p. 100752 100752.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  • Friction Stir Welding 100%
  • Comprehensive Review 100%
  • Microstructural Evolution 100%
  • Microstructure 40%
  • Joints (Structural Components) 40%

• Initial plasticity stages in Mg alloys containing Long-Period Stacking Ordered phases using High Resolution Digital Image Correlation (HRDIC) and in-situ synchrotron radiation

  Garcés, G., Orozco-Caballero, A., Quinta da Fonseca, J., Pérez, P., Medina, J., Stark, A., Schell, N. & Adeva, P., 2020, In: Materials Science and Engineering A.

  Research output: Contribution to journal › Article › peer-review

• Intergranular corrosion of AA6082 Al-Mg-Si alloy extrusion: the influence of trace Cu and grain boundary misorientation

  Zhang, X., Lv, Y., Hashimoto, T., Nilsson, J.-O. & Zhou, X., 14 Sept 2020, (Accepted/In press) In: Journal of Alloys and Compounds.

  Research output: Contribution to journal › Article › peer-review

  • Silicon Alloys 100%
  • Intergranular Corrosion 100%
  • Grain Boundary 100%
  • Electron Backscatter Diffraction 25%
  • Corrosion Monitoring 25%

• Investigating the effect of pH on corroding magnesium by dynamic pH sweep coupled with electrochemical measurements

  Curioni, M., Lyu, M., Cioncolini, A. & Scenini, F., 2020, In: Corrosion.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Magnesium 100%
  • Ion Exchange 100%
  • Sodium Chloride 100%
  • Test Cell 100%
  • Electrochemical Cell 100%
  44 Downloads (Pure)

• Microscopic strain localisation in WAAM Ti-6Al-4V during uniaxial tensile loading

  Quinta Da Fonseca, J., 12 Oct 2020, In: MATEC Web of Conferences.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Microstructure evolution and deformation texture during rolling of TIMETAL®407

  Singh, G., Quinta da Fonseca, J. & Preuss, M., 1 Mar 2020, In: Materialia. 9, 100596.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Microstructure 100%
  • Microstructure Evolution 100%
  • Deformation Texture 100%
  • Titanium 100%
  • Ti-6Al-4V 100%
  261 Downloads (Pure)

• Multi-component chemo-mechanics based on transport relations for the chemical potential

  Shanthraj, P., Liu, C., Akbarian, A., Svendsen, B. & Raabe, D., 15 Jun 2020, In: Computer Methods in Applied Mechanics and Engineering. 365, 15, 113029.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Chemical Potential 100%
  • Solution (Chemistry) 100%
  • Elastic Deformation 100%
  • Viscoplastic Material 100%
  • Finite Strain 100%

• On the observation of annealing twins during simulating β-grain refinement in Ti–6Al–4V high deposition rate AM with in-process deformation

  Donoghue, J., Davis, A. E., Daniel, C. S., Garner, A., Martina, F., Quinta Da Fonseca, J. & Prangnell, P. B., 1 Mar 2020, In: Acta Materialia. 186, p. 229-241 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Additive Manufacture 100%
  • Deformation Process 100%
  • High Deposition Rate 100%
  • Crystal Microstructure 100%
  • Grain Refinement 100%

• Quantification of strain fields and grain refinement in Ti-6Al-4 V inter-pass rolled wire-arc AM by EBSD misorientation analysis

  Davis, A., Hönnige, J. R., Martina, F. & Prangnell, P., 25 Sept 2020, (E-pub ahead of print) In: Materials Characterization. p. 110673

  Research output: Contribution to journal › Article › peer-review

  • Strain Field 100%
  • Ti-6al-4v 100%
  • Local Strain 100%
  • Plastic Zone 100%
  • Electron Backscatter Diffraction 100%

• Slip band characteristics in the presence of grain boundaries in nickel-based superalloy

  Sperry, R., Fullwood, D. T., Harte, A., Fonseca, J. Q. D., Homer, E. R. & Wagoner, R. H., May 2020, In: Acta Materialia.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Slip Band 100%
  • Grain Boundary 100%
  • Nickel-Based Superalloys 100%
  • Strain Profile 40%
  • Slip System 40%
  274 Downloads (Pure)

• Texture Evolution Under Fast Heating and Cooling Rates of Zirconium Alloys Studied In-Situ by Synchrotron X-Ray Diffraction

  Nguyen, C.-T., Garner, A., Romero, J., Ambard, A., Preuss, M. & Fonseca, J. Q. D., 1 Oct 2020, In: SSRN Electronic Journal.

  Research output: Contribution to journal › Article › peer-review

• The Behaviour of AA5754 and AA5052 Aluminium Alloys in Alkaline Etching Solution: Similarity and Difference

  Jin, Z., Cai, C., Yuan, Y., Kang, D., Hunter, J. & Zhou, X., 13 Nov 2020, (Accepted/In press) In: Materials Characterization.

  Research output: Contribution to journal › Article › peer-review

  • Intermetallics 100%
  • Aluminum Alloys 100%
  • Density 75%
  • Analytical Electron Microscopy 25%
  • Morphology 25%

• The Behaviour of Iron-Containing Intermetallic Particles in Aluminium Alloys in Alkaline Solution

  Jin, Z., Cai, C., Hashimoto, T., Yuan, Y., Kang, D., Hunter, J. & Zhou, X., 9 Nov 2020, (Accepted/In press) In: Corrosion Science.

  Research output: Contribution to journal › Article › peer-review

  • Intermetallics 100%
  • Aluminum Alloys 100%
  • Film 33%
  • Corrosion 33%
  • Aluminum Oxide 33%

• The direct observation of copper segregation at the broad faces of η’ and η precipitates in AA7010 aluminium alloy

  Cassell, A., Robson, J., Zhou, X., Hashimoto, T. & Besel, M., 1 May 2020, In: Materials Characterization. 163, 110232, 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Heat Treatment 100%
  • Direct Observation 100%
  • Aluminum Alloys 100%
  • Microstructure 50%
  • Corrosion Property 50%
  55 Downloads (Pure)

• The Effectiveness of Grain Refinement by Machine Hammer Peening in High Deposition Rate Wire-Arc AM Ti-6Al-4V

  Hönnige, J. R., Davis, A. E., Ho, A., Kennedy, J. R., Neto, L., Prangnell, P. & Williams, S., 6 May 2020, (E-pub ahead of print) In: Metallurgical and Materials Transactions A.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Shot Peening 100%
  • Ti-6al-4v 100%
  • High Deposition Rate 100%
  • Ti-6Al-4V 100%
  • Grain Refinement 100%

• The effect of exposure conditions on performance evaluation of post-treated anodic oxides on an aerospace aluminium alloy: comparison between salt spray and immersion testing.

  Usman, B. J., Scenini, F. & Curioni, M., 2 Jul 2020, (Accepted/In press) In: Surface and Coatings Technology.

  Research output: Contribution to journal › Article › peer-review

  • Cerium 100%
  • Oxide Compound 100%
  • Aluminum Alloys 100%
  • Salt Spray 100%
  • Exposure Condition 100%

• The effect of loading direction on strain localisation in wire arc additively manufactured Ti–6Al–4V

  Lunt, D., Ho, A., Davis, A., Harte, A., Martina, F., Quinta da Fonseca, J. & Prangnell, P., 21 May 2020, (E-pub ahead of print) In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing . 139608.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Strain Localization 100%
  • Loading Direction 100%
  • Manufactured Ti6al4v 100%
  • Grain Boundary 100%
  • Heat Affected Zone 75%

• The effect of processing parameters on rapid-heating β recrystallization in inter-pass deformed Ti-6Al-4V wire-arc additive manufacturing

  Davis, A. E., Kennedy, J. R., Ding, J. & Prangnell, P. B., 1 May 2020, In: Materials Characterization. 163, p. 110298

  Research output: Contribution to journal › Article › peer-review

  • Microstructure 100%
  • Additive Manufacturing 100%
  • Ti-6al-4v 100%
  • Processing Parameter 100%
  • Rapid Heating 100%

• The effect of solid solution and gamma prime on the deformation modes in Ni-based superalloys

  Harte, A., Atkinson, M., Smith, A., Drouven, C., Zaefferer, S., Quinta da Fonseca, J. & Preuss, M., 15 Apr 2020, (E-pub ahead of print) In: Acta Materialia.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Flow Stress 100%
  • Deformation Mode 100%
  • Gamma Prime 100%
  • Strengthened Alloy 100%
  • Solution Strengthened Alloy 100%

• The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation

  Simm, T. H., Das, Y. B., Forsey, A. N., Gungor, S., Fitzpatrick, M. E., Prakash, D. G. L., Moat, R. J., Birosca, S., Quinta da Fonseca, J. & Perkins, K. M., 1 Feb 2020, In: Materials Characterization. 160, 110114.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Pole Figure 100%
  • Plastic Deformation 100%
  • Multiscale 33%
  • Length Scale 33%
  • Digital Image Correlation 33%
  72 Downloads (Pure)

• Understanding strain localisation behaviour in a near-α Ti-alloy during initial loading below the yield stress

  Dichtl, C., Lunt, D., Thomas, R., Atkinson, M., Thomas, M., Rugg, D., Sandala, R., Quinta Da Fonseca, J. & Preuss, M., 12 Oct 2020, In: MATEC Web of Conferences. 321, 16 p., 11039.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Strain Localization 100%
  • Stress Level 100%
  • Yield Point 100%
  • Yield Stress 100%
  • Edge Dislocation 100%

• Unveiling the Re effect in Ni-based single crystal superalloys

  Wu, X., Makineni, S. K., Liebscher, C. H., Dehm, G., Mianroodi, J. R., Shanthraj, P., Svendsen, B., Burger, D., Eggeler, G., Raabe, D. & Gault, B., 20 Jan 2020, In: Nature Communications. 11, 1, p. 389 389.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Creep 100%
  • Single Crystal 100%
  • Superalloys 100%
  • Nickel-Based Superalloys 75%
  • Crystalline Material 25%

• xrdfit: A Python package for fitting synchrotron X-ray diffraction spectra

  Daniel, C., 31 Aug 2020, In: The Journal of Open Source Software.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  644 Downloads (Pure)
• 2019

  A detailed study of texture changes during alpha–beta processing of a zirconium alloy

  Daniel, C. S., Honniball, P. D., Bradley, L., Preuss, M. & Quinta Da Fonseca, J., 5 Oct 2019, In: Journal of Alloys and Compounds. 804, p. 65-83

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Zirconium Alloys 100%
  • Electron Backscatter Diffraction 100%
  • Niobium Alloys 100%
  • Titanium 100%
  • Extruded Tube 50%

• Analytical Electron Microscopy of Grain Boundary Segregation: Application to Al-Zn-Mg-Cu (7xxx) Alloys

  Robson, J., Aug 2019, In: Materials Characterization. 154, p. 325-334

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Analytical Electron Microscopy 100%
  • Grain Boundary 100%
  • Alloying 20%
  • Boundary Relative 20%

• Atomistic phase field chemomechanical modeling of dislocation-solute-precipitate interaction in Ni-Al-Co

  Mianroodi, J. R., Shanthraj, P., Kontis, P., Cormier, J., Gault, B., Svendsen, B. & Raabe, D., 13 Jun 2019, In: Acta Materialia.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Tomography 100%
  • Mechanical Property 100%
  • Superalloys 100%
  • Nickel-Based Superalloys 100%
  • Atom Probe 100%

• Automated Image Mapping and Quantification of Microstructure Heterogeneity in Additive Manufactured Ti6Al4V

  Zhao, H., Ho, A., Davis, A., Antonysamy, A. A. & Prangnell, P., Jan 2019, In: Materials Characterization. 147, p. 131-145 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Scanning Electron Microscopy 100%
  • Boundary Condition 100%
  • Actuator 100%
  • Image Analysis 100%
  • Electron Beam 100%
  354 Downloads (Pure)

• Characterisation of irradiation enhanced strain localisation in a zirconium alloy

  Thomas, R., Lunt, D., Atkinson, M., Quinta da Fonseca, J., Preuss, M., Barton, F., O'Hanlon, J. & Frankel, P., 2019, In: Acta Materialia.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Strain Localization 100%
  • Irradiated Material 100%
  • Enhanced Strain 100%
  • Digital Image Correlation 66%
  • High Resolution 66%

• Comparing local deformation measurements to predictions from crystal plasticity during reverse loading of an aerospace alloy

  Atkinson, M., Lebensohn, R. A. & Quinta da Fonseca, J., Dec 2019. 7 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

  • Aerospace Alloy 100%
  • Reverse Loading 100%
  • Crystal Plasticity Model 66%
  • Microstructure 33%
  • Aerospace Applications 33%

• Corrosion Behaviour of AA6082 Al-Mg-Si Alloy Extrusion: the Influence of Quench Cooling Rate

  Zhang, X., Zhou, X. & Nilsson, J.-O., 2019, In: Corrosion Science.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Corrosion 100%
  • Silicon Alloys 100%
  • Corrosion Behavior 100%
  • Cooling Rate 100%
  • Grain Boundary 100%

• Dispersoid Composition in Zirconium Containing Al-Zn-Mg-Cu (AA7010) Aluminium Alloy

  Cassell, A., Robson, J., Race, C., Eggeman, A., Hashimoto, T. & Besel, M., 13 Mar 2019, In: Acta Mater.. 169, p. 135-146 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Zirconium 100%
  • Aluminum Alloys 100%
  • High Resolution 100%
  • Stoichiometry 100%
  • Copper Alloys 25%

• Effect of Dispersoids on the Microstructure Evolution in Al-Mg-Si Alloys

  Kenyon, M., Robson, J., Fellowes, J. & Liang, Z., 9 Apr 2019, In: Advanced Engineering Materials.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Scanning Transmission Electron Microscopy 100%
  • Silicon Alloys 100%
  • Electron Microprobe 100%
  • Grain Boundary 100%
  • Dispersoid 100%

• Identification of active slip mode in a hexagonal material by correlative scanning electron microscopy

  Xu, X., Lunt, D., Thomas, R., Revathy Rajan, P. B., Harte, A., Atkinson, M., Quinta da Fonseca, J. & Preuss, M., 2019, In: Acta Materialia.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • High Resolution 100%
  • Scanning Electron Microscopy 100%
  • Grain Orientation 66%
  • Zirconium Alloys 50%
  • Electron Backscatter Diffraction 50%

• Incorporation of alloying elements into porous anodic films on aluminium alloys: the role of cell diameter

  Torrescano-Alvarez, J. M., Curioni, M., Habazaki, H., Hashimoto, T., Skeldon, P. & Zhou, X., 10 Feb 2019, In: Electrochimica Acta. 296, p. 783-789 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Anodic Film 100%
  • Alloying 100%
  • Aluminum Alloys 100%
  • Alloying Element 100%
  • Film 57%
  36 Downloads (Pure)

• Initiation and short crack growth behaviour of environmentally induced cracks in AA5083 H131 investigated across time and length scales

  Gudla, V. C., Garner, A., Storm, M., Gajjar, P., Carr, J., Palmer, B. C., Lewandowski, J. J., Withers, P. J., Holroyd, N. J. H. & Burnett, T. L., 2019, In: Corrosion Reviews.

  Research output: Contribution to journal › Article › peer-review

  File

  • Corrosion 100%
  • Crack Growth 100%
  • Short Crack 100%
  • Ultimate Tensile Strength 50%
  • Yield Stress 50%
  285 Downloads (Pure)

• Interaction Between Precipitate Basal Plates and Tensile Twins in Magnesium Alloys

  Hidalgo-Manrique, P. & Robson, J. D., 29 May 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Tensiles 100%
  • Critical Resolved Shear Stress 100%
  • Yield Stress 100%
  • Magnesium Alloy 100%
  • Aging Time 33%

• Nickel fluoride as a surface activation agent for electroless nickel coating of anodized AA1050 aluminum alloy

  Kocabaş, M., Örnek, C., Curioni, M. & Cansever, N., 2019, In: Surface and Coatings Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Aluminum Alloys 100%
  • Nickel Coating 100%
  • Activated Condition 100%
  • Microscopy 50%
  • Scanning Electron Microscopy 50%
  424 Downloads (Pure)

• On the interaction of precipitates and tensile twins in magnesium alloys

  Liu, C., Shanthraj, P., Robson, J. D., Diehl, M., Dong, S., Dong, J., Ding, W. & Raabe, D., 30 Jul 2019, In: Acta Materialia. 178, p. 146-162

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Tensiles 100%
  • Critical Resolved Shear Stress 100%
  • Strengthening Mechanism 100%
  • Volume Fraction 100%
  • Magnesium Alloy 100%

• On the Origin of Microstructural Banding in Ti-6Al4V Wire-Arc Based High Deposition Rate Additive Manufacturing

  Ho, A., Zhao, H., Fellowes, J., Martina, F., Davis, A. & Prangnell, P., 1 Mar 2019, In: Acta Materialia. 166, p. 306-323 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Coarsening 100%
  • Three Dimensional Printing 100%
  • Powder 50%
  • Microstructural Analysis 50%
  • Volume Fraction 50%

• On the work hardening of titanium: new insights from nanoindentation

  Fitzner, A., Palmer, J., Gardner, B., Thomas, M., Preuss, M. & da Fonseca, J. Q., May 2019, In: Journal of Materials Science. 54, 10, p. 7961-7974 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Nanoindentation 100%
  • Titanium 100%
  • Work Hardening 100%
  • Crystal Orientation 25%