XRADIA : High Resolution of 4D Imaging of Degradation and Self-repair Processes

Zhu, Q., Forsyth, A. & Todd, R., 2019, 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018.

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

File

220 Downloads (Pure)

Real-time Auto-regressive Modelling of Electric Power Network Frequency: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society

Bolzoni, A., Todd, R., Forsyth, A. & Perini, R., 2019, p. 515-520. 6 p.

Research output: Contribution to conference › Paper › peer-review

Replicating PWR Primary Water Conditions in Low Pressure H2-Steam Environment to Study Alloy 600 Oxidation Processes

Volpe, L., Bertali, G., Curioni, M., Burke, M. G. & Scenini, F., 2019, In: Electrochemical Society. Journal. 166, 2

Research output: Contribution to journal › Article › peer-review

Open Access

The beneficial effect of surface carbon coating on stress corrosion cracking of Type 304 austenitic stainless steels in high temperature water

Mukahiwa, K., Bertali, G., Burke, M. G., Duff, J. & Scenini, F., 1 Jan 2019, In: Scripta Materialia. 158, p. 77-82 5 p.

Research output: Contribution to journal › Article › peer-review

Open Access

The size dependent strength of Fe, Nb and V micropillars at room and low temperature

Yilmaz, H., Williams, C. J., Risan, J. & Derby, B., 2 Aug 2019, In: Acta Materialia. p. 100424

Research output: Contribution to journal › Article › peer-review

Open Access

Time-lapse three-dimensional imaging of crack propagation in beetle cuticle

Sykes, D., Hartwell, R., Bradley, R. S., Burnett, T. L., Hornberger, B., Garwood, R. J. & Withers, P. J., 2019, In: Acta Biomaterialia. 86, p. 109-116 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

198 Downloads (Pure)

2018

Corrosion Fatigue and Microstructural Characterisation of Type 316 Austenitic Stainless Steels Tested in PWR Primary Water

Mukahiwa, K., Scenini, F., Burke, M. G., Platts, N., Tice, D. & Stairmand, J., Feb 2018, In: Corrosion Science. 131, p. 57-70 14 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Effect of microstructure on early oxidation of MCrAlY coatings

Chen, Y., Zhao, X. & Xiao, P., 15 Oct 2018, In: Acta Materialia. 159, p. 150-162 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

642 Downloads (Pure)

Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy

Larrosa, N. O., Wang, W., Read, N., Loretto, M. H., Evans, C., Carr, J., Tradowsky, U., Attallah, M. M. & Withers, P. J., 1 Dec 2018, In: Theoretical and Applied Fracture Mechanics. 98, p. 123-133 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

181 Downloads (Pure)

2017

Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C

Zeng, Y., Wang, D., Xiong, X., Zhang, X., Withers, P. J., Sun, W., Smith, M., Bai, M. & Xiao, P., 17 Jun 2017, In: Nature Communications. 8, 15836.

Research output: Contribution to journal › Article › peer-review

Open Access

A mechanistic understanding on rumpling of a NiCoCrAlY bond coat for thermal barrier coating applications

Chen, Y., Zhao, X., Bai, M., Yang, L., Li, C., Wang, Y. L., Carr, J. & Xiao, P., 15 Apr 2017, In: Acta Materialia. 128, p. 31-42 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

436 Downloads (Pure)

A study of the progression of damage in an axially loaded Branta leucopsis femur using X-ray computed tomography and digital image correlation

Mustansar, Z., McDonald, S. A., Sellers, W. I., Manning, P. L., Lowe, T., Withers, P. J. & Margetts, L., 23 Jun 2017, In: PeerJ. 2017, 6, e3416.

Research output: Contribution to journal › Article › peer-review

Open Access

Crack healing behaviour of Cr₂AlC MAX phase studied by X-ray tomography

Pei, R., McDonald, S. A., Shen, L., van der Zwaag, S., Sloof, W. G., Withers, P. J. & Mummery, P. M., 1 Feb 2017, In: Journal of the European Ceramic Society. 37, 2, p. 441-450 10 p.

Research output: Contribution to journal › Article › peer-review

Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet

Pawar, S., Slater, T., Burnett, T., Zhou, X., Scamans, G. M., Fan, Z., Thompson, G. & Withers, P., Jul 2017, In: Acta Materialia. 133, p. 90-99 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Cu segregation on the interface between Al₂O₃ substrate and Al-1.4Cu alloy

Li, J., Wang, L., Zhong, X., Xia, M., Haigh, S. J. & Schumacher, P., Jul 2017, In: Materials Characterization. 129, p. 300-304 5 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

191 Downloads (Pure)

Degradation of metallic materials studied by correlative tomography

Burnett, T., Holroyd, N. J. H., Lewandowski, J. J., Ogurreck, M., Rau, C., Kelley, R., Pickering, E., Daly, M., Sherry, A. H., Pawar, S., Slater, T. & Withers, P., 1 Aug 2017, In: IOP Conference Series: Materials Science and Engineering. 219

Research output: Contribution to journal › Article › peer-review

Open Access

Digital element simulation of aligned tows during compaction validated by computed tomography (CT)

Yousaf, Z., Potluri, P., Withers, P. J., Mollenhauer, D., Zhou, E. & Duning, S., 8 Jun 2017, In: International Journal of Solids and Structures. 154, p. 78-87

Research output: Contribution to journal › Article › peer-review

Open Access

File

299 Downloads (Pure)

Electrochemical and Microstructural Characterization of Alloy 600 in Low Pressure H2-steam

Volpe, L., Bertali, G., Curioni, M., Burke, M. G. & Scenini, F., 2017, 18th International Conference on Environmental Degradation in Nuclear Power Systems . p. 409-422 13 p.

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

File

69 Downloads (Pure)

Elemental distribution within the long-period stacking ordered structure in a Mg-Gd-Zn-Mn alloy

Li, J., Hage, F. S., Zhong, X., Wu, Y., Peng, L., Haigh, S. J., Ramasse, Q. M. & Schumacher, P., 1 Jul 2017, In: Materials Characterization. 129, p. 247-251 5 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

106 Downloads (Pure)

Enhanced Photoluminescence of Solution Exfoliated Transition Metal Dichalcogenides via Laser Etching

Bissett, M., Hattle, A., Marsden, A., Kinloch, I. & Dryfe, R., 2017, In: ACS Omega. 2, 2, p. 738-745

Research output: Contribution to journal › Article › peer-review

Open Access

Exfoliation of natural van der Waals heterostructures to a single unit cell thickness

Velicky, M., Toth, P., Rakowski, A., Rooney, A., Kozikov, A., Woods, C., Mishchenko, A., Fumagalli, L., Yin, J., Zolyomi, V., Georgiou, T., Haigh, S., Novoselov, K. & Dryfe, R., 13 Feb 2017, In: Nature Communications. 8, p. 14410 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

250 Downloads (Pure)

Graphene-enhanced electrodes for scalable supercapacitors

Tsai, I.-L., Cao, J., Le Fevre, L., Wang, B., Todd, R., Dryfe, R. & Forsyth, A., 10 Dec 2017, In: Electrochimica Acta. 257, p. 372-379 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Microstructural evolution during sintering of copper particles studied by laboratory diffraction contrast tomography (LabDCT)

Mcdonald, S., Holzner, C., Lauridsen, E. M., Reischig, P., Merkle, A. P. & Withers, P., 12 Jul 2017, In: Scientific Reports. 7, 5251.

Research output: Contribution to journal › Article › peer-review

Open Access

Microstructure and mechanical behaviour of aluminium matrix composites reinforced with graphene oxide and carbon nanotubes

Hidalgo-Manrique, P., Yan, S., Lin, F., Hong, Q., Kinloch, I. A., Chen, X., Young, R. J., Zhang, X. & Dai, S., 1 Dec 2017, In: Journal of Materials Science. 52, 23, p. 13466-13477 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

111 Downloads (Pure)

Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel

Lopez-Crespo, P., Vazquez-Peralta, J., Simpson, C., Buslaps, T. & Withers, P. J., 1 Jul 2017, In: Frattura e Integrita Strutturale. 11, 41, p. 203-210 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Practical Aspects of Electrochemical Corrosion Measurements during in situ Analytical TEM of Austenitic Stainless Steel in Aqueous Media

Schilling, S., Janssen, A., Zaluzec, N. J. & Burke, M. G., 8 Aug 2017, In: Microscopy and Microanalysis. 25, 4, p. 741 - 750

Research output: Contribution to journal › Article › peer-review

Open Access

The imaging of failure in structural materials by synchrotron radiation X-ray microtomography

Wu, S. C., Xiao, T. Q. & Withers, P., Sept 2017, In: Engineering Fracture Mechanics. 182, p. 127-156

Research output: Contribution to journal › Article › peer-review

Open Access

File

379 Downloads (Pure)

Time-lapse lab-based X-ray nano-CT study of corrosion damage

Lyon, S., Liu, Y., Zhou, X., Withers, P., Gholinia, A. & Burnett, T., Jul 2017, In: Journal of Microscopy. 267, 1, p. 98-106 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

331 Downloads (Pure)

Ultrafine grain formation and coating mechanism arising from a blast coating process: A transmission electron microscopy analysis

Dunne, C. F., Roche, K., Janssen, A., Zhong, X., Burke, M. G., Twomey, B. & Stanton, K. T., 17 Nov 2017, In: Surface and Interface Analysis. 49, 12, p. 1271-1278 8 p.

Research output: Contribution to journal › Article › peer-review

2016

A comparison of different approaches for imaging cracks in composites by X-ray micro tomography

Yu, B., Bradley, R. S., Soutis, C. & Withers, P. J., 30 May 2016, In: Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences.

Research output: Contribution to journal › Article › peer-review

Open Access

A comparison of the characteristics of excimer and femtosecond laser ablation of acrylonitrile butadiene styrene (ABS)

See, T. L., Liu, Z., Li, L. & Zhong, X. L., 28 Feb 2016, In: Applied Surface Science. 364, p. 467-476 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Correlative multiscale tomography of biological materials

Bradley, R. S. & Withers, P. J., 1 Jul 2016, In: MRS Bulletin. 41, 7, p. 549-554 6 p.

Research output: Contribution to journal › Article › peer-review

Diffraction Contrast Tomography in the Laboratory – Applications and Future Directions

Holzner, C., Lavery, L., Bale, H., Merkle, A., Mcdonald, S., Withers, P., Zhang, Y., Juul Jensen, D., Kimura, M., Lyckegaard, A., Reischig, P. & Lauridsen, E., 1 Jul 2016, In: Microscopy Today. 24, 10 p.

Research output: Contribution to journal › Article › peer-review

High Spatial Resolution Evaluation of Residual Stresses in Shot Peened Specimens Containing Sharp and Blunt Notches by Micro-hole Drilling, Micro-slot Cutting and Micro-X-ray Diffraction Methods

Winiarski, B., Benedetti, M., Fontanari, V., Allahkarami, M., Hanan, J. C. & Withers, P. J., 10 Jun 2016, In: Experimental Mechanics. p. 1-15 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Improved Understanding of Environment-Induced Cracking (EIC) of Sensitized 5XXX Series Aluminium Alloys

Holroyd, N. J. H., Burnett, T., Seifi, M. & Lewandowski, J., 25 Nov 2016, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing . 682, p. 613-621

Research output: Contribution to journal › Article › peer-review

Open Access

Low-Temperature environmentally assisted cracking of grade 2205 duplex stainless steel beneath a MgCl2:FeCl3 salt droplet

Ornek, C., Zhong, X. & Engelberg, D. L., 1 Mar 2016, In: Corrosion. 72, 3, p. 384-399 16 p.

Research output: Contribution to journal › Article › peer-review

Post-processing techniques for making reliable measurements from curve-skeletons

Bradley, R. S. & Withers, P., 2016, In: Computers in Biology and Medicine|Comput Biol Med. 72, p. 120-131 11 p.

Research output: Contribution to journal › Article › peer-review

Sample Preparation Methodologies for In Situ Liquid and Gaseous Cell Analytical Transmission Electron Microscopy of Electropolished Specimens

Zhong, X., Schilling, S., Zaluzec, N. J. & Burke, M. G., 2016, In: Microscopy and Microanalysis. 22, 6

Research output: Contribution to journal › Article › peer-review

Open Access

File

717 Downloads (Pure)

Silver assisted crack healing in SiC

Geng, X., Yang, F., Chen, Y., Lu, X., Zhong, X. & Xiao, P., 15 Feb 2016, In: Acta Materialia. 105, 2, p. 121-129 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

257 Downloads (Pure)

STEM-EDX tomography of bimetallic nanoparticles: A methodological investigation

Slater, T., Janssen, A., Camargo, P. H. C., Burke, G., Zaluzec, N. J. & Haigh, S., 1 Mar 2016, In: Ultramicroscopy. 162, p. 61-73 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File

118 Downloads (Pure)

Xe⁺ Plasma FIB: 3D Microstructures from Nanometers to Hundreds of Micrometers

Burnett, T., Winiarski, B., Kelley, R., Zhong, X. L., Boona, I. N., McComb, D. W., Mani, K., Burke, M. G. & Withers, P., May 2016, In: Microscopy Today. 24, 3, p. 32-37 6 p.

Research output: Contribution to journal › Article › peer-review

Open Access

File