纤维增强复合材料界面的力学表征与参数测定

Zhangjian Wu

纤维增强复合材料界面的力学表征与参数测定

Translated title of the contribution: MECHANICAL CHARACTERIZATION AND PARAMETER DETERMINATION OF THE FIBER REINFORCED COMPOSITE INTERPHASE

Zhangjian Wu

Research output: Contribution to journal › Article › peer-review

Abstract

A micromechanics analysis on the interphase of fiber reinforced polymer compolite is presented. The representative volume element of coaxial combined cylinder model is adopted. Four compliance parameters Sij(i,j=1, 2) are used do characterize the interphase effect, which generalizes Hashin's two}arameter interface mode. A relation between these parameters and macro behaviour of composite is established based on the equivalent principle of a multiphase body. By experiment,interfacial parameters are first determined for two kinds of composites:T300/ST 350 and Glass/Polyester.

本文对聚合物基纤维增强复合材料界面特性进行细观力学研究。从反映复合材料性能的同心圆柱形代表体元出发, 将纤维与基体之间的界面特性用四个柔度参数表征, 推广了 Hashin 等人的双参数模型, 并进而同复合材料宏观性能相联系。通过实验首次测定了 T 300/ ST350和玻璃纤维/ 不饱和聚脂两类复合材料的界面参数值.

Translated title of the contribution	MECHANICAL CHARACTERIZATION AND PARAMETER DETERMINATION OF THE FIBER REINFORCED COMPOSITE INTERPHASE
Original language	Chinese
Pages (from-to)	81-86
Number of pages	6
Journal	Fuhe Cailiao Xuebao
Volume	13
Issue number	3
Publication status	Published - 1996

Keywords

polymer matrix
composite
interphase characterization

Access to Document

http://fhclxb.buaa.edu.cn/CN/abstract/abstract11078.shtml

Cite this

@article{00adf7c268814c9ea2ecaf1c47769fb3,

title = "纤维增强复合材料界面的力学表征与参数测定",

abstract = "A micromechanics analysis on the interphase of fiber reinforced polymer compolite is presented. The representative volume element of coaxial combined cylinder model is adopted. Four compliance parameters Sij(i,j=1, 2) are used do characterize the interphase effect, which generalizes Hashin's two}arameter interface mode. A relation between these parameters and macro behaviour of composite is established based on the equivalent principle of a multiphase body. By experiment,interfacial parameters are first determined for two kinds of composites:T300/ST 350 and Glass/Polyester.本文对聚合物基纤维增强复合材料界面特性进行细观力学研究。从反映复合材料性能的同心圆柱形代表体元出发, 将纤维与基体之间的界面特性用四个柔度参数表征, 推广了 Hashin 等人的双参数模型, 并进而同复合材料宏观性能相联系。通过实验首次测定了 T 300/ ST350和玻璃纤维/ 不饱和聚脂两类复合材料的界面参数值.",

keywords = "polymer matrix , composite , interphase characterization ",

author = "Zhangjian Wu",

year = "1996",

language = "Chinese",

volume = "13",

pages = "81--86",

journal = "Fuhe Cailiao Xuebao",

issn = "1000-3851",

publisher = "Beijing University of Aeronautics and Astronautics (BUAA)",

number = "3",

}

TY - JOUR

T1 - 纤维增强复合材料界面的力学表征与参数测定

AU - Wu, Zhangjian

PY - 1996

Y1 - 1996

N2 - A micromechanics analysis on the interphase of fiber reinforced polymer compolite is presented. The representative volume element of coaxial combined cylinder model is adopted. Four compliance parameters Sij(i,j=1, 2) are used do characterize the interphase effect, which generalizes Hashin's two}arameter interface mode. A relation between these parameters and macro behaviour of composite is established based on the equivalent principle of a multiphase body. By experiment,interfacial parameters are first determined for two kinds of composites:T300/ST 350 and Glass/Polyester.本文对聚合物基纤维增强复合材料界面特性进行细观力学研究。从反映复合材料性能的同心圆柱形代表体元出发, 将纤维与基体之间的界面特性用四个柔度参数表征, 推广了 Hashin 等人的双参数模型, 并进而同复合材料宏观性能相联系。通过实验首次测定了 T 300/ ST350和玻璃纤维/ 不饱和聚脂两类复合材料的界面参数值.

AB - A micromechanics analysis on the interphase of fiber reinforced polymer compolite is presented. The representative volume element of coaxial combined cylinder model is adopted. Four compliance parameters Sij(i,j=1, 2) are used do characterize the interphase effect, which generalizes Hashin's two}arameter interface mode. A relation between these parameters and macro behaviour of composite is established based on the equivalent principle of a multiphase body. By experiment,interfacial parameters are first determined for two kinds of composites:T300/ST 350 and Glass/Polyester.本文对聚合物基纤维增强复合材料界面特性进行细观力学研究。从反映复合材料性能的同心圆柱形代表体元出发, 将纤维与基体之间的界面特性用四个柔度参数表征, 推广了 Hashin 等人的双参数模型, 并进而同复合材料宏观性能相联系。通过实验首次测定了 T 300/ ST350和玻璃纤维/ 不饱和聚脂两类复合材料的界面参数值.

KW - polymer matrix

KW - composite

KW - interphase characterization

M3 - Article

SN - 1000-3851

VL - 13

SP - 81

EP - 86

JO - Fuhe Cailiao Xuebao

JF - Fuhe Cailiao Xuebao

IS - 3

ER -

纤维增强复合材料界面的力学表征与参数测定

Abstract

Keywords

Access to Document

Fingerprint

Cite this