Abstract
Fused Deposition Modelling (FDM), a form of additive manufacture, is typically constrained to 2.5D, vertically stacked layers; curved layers have been shown to possess improved mechanical properties and surface finish but require complex toolpath generation. This paper demonstrates methods of generating thin-walled FDM components with curved layers suited for use within aerospace composite sandwich panels; secondary structures containing high complexity and low production volumes ripe for manufacture using additive techniques.An industrial robot arm and a PC-based open-source controller allowed for significantly higher degrees of toolpath complexity for FDM than realised using conventional systems. Three use cases are presented to describe the manufacture of FDM components, with the first demonstrating deposition on a rotating cylinder, allowing for customised stiffening and reinforcement. The second shows a curved surface defined by an STL file, with the nozzle orientated to remain perpendicular to the surface, and finally themanufacture of a shaped aerofoil cores with curved layers conforming to the outer surfaces. The application developed over the course of this work shows the high levels of manufacturing flexibility achievable with arm-based FDM, and its potential use within the aerospace industry where optimised and complex components are manufactured in low volumes.
Original language | English |
---|---|
Number of pages | 9 |
Publication status | Published - 24 Jun 2018 |
Event | 18th European Conference on Composite Materials: ECCM18 - Athens, Greece Duration: 24 Jun 2018 → 28 Jun 2018 |
Conference
Conference | 18th European Conference on Composite Materials |
---|---|
Abbreviated title | ECCM18 |
Country/Territory | Greece |
City | Athens |
Period | 24/06/18 → 28/06/18 |