TY - JOUR
T1 - Automatic guided wave PPM communication system for potential SHM of flooding members in sub-sea oilrigs
AU - Mijarez, Rito
AU - Gaydecki, Patrick
N1 - cited By (since 1996)2
PY - 2013/5
Y1 - 2013/5
N2 - An automatic guided wave pulse position modulation system, using steel tubes as the communication channel, for detecting flooding in the hollow sub-sea structures of newly built offshore oilrigs is presented. Underwater close visual inspections (CVI) are normally conducted during swim-round surveys in pre-selected areas or areas suspected of damage. An acceptable alternative to CVI is a non-destructive testing (NDT) technique called flood member detection (FMD). Usually, this NDT technique employs ultrasound or x-rays to detect the presence of seawater in the tubular structures, requiring divers or remote operating vehicles (ROVs). The field-proven FMD technique, integrated within the concept of structural health monitoring, offers an alternative to these traditional inspection methods. The system employs two smart sensors and modulators, which transmit 40 kHz guided wave pulses, and a digital signal processing demodulator, which performs automatic detection of guided wave energy packets. Experiments were performed in dry conditions, inside and outside the laboratory; in the former using a steel tube 1.5 m×0.27 m×2 mm, and in the latter using a tubular steel heliport structure approximately 15 m×15 m in area and the base deck of an oilrig under construction. Results confirm that, although there was significant dispersion of the transmitted pulses, the system successfully distinguished automatically guided wave encoded information that could potentially be used in sub-sea oilrigs. © 2013 IOP Publishing Ltd.
AB - An automatic guided wave pulse position modulation system, using steel tubes as the communication channel, for detecting flooding in the hollow sub-sea structures of newly built offshore oilrigs is presented. Underwater close visual inspections (CVI) are normally conducted during swim-round surveys in pre-selected areas or areas suspected of damage. An acceptable alternative to CVI is a non-destructive testing (NDT) technique called flood member detection (FMD). Usually, this NDT technique employs ultrasound or x-rays to detect the presence of seawater in the tubular structures, requiring divers or remote operating vehicles (ROVs). The field-proven FMD technique, integrated within the concept of structural health monitoring, offers an alternative to these traditional inspection methods. The system employs two smart sensors and modulators, which transmit 40 kHz guided wave pulses, and a digital signal processing demodulator, which performs automatic detection of guided wave energy packets. Experiments were performed in dry conditions, inside and outside the laboratory; in the former using a steel tube 1.5 m×0.27 m×2 mm, and in the latter using a tubular steel heliport structure approximately 15 m×15 m in area and the base deck of an oilrig under construction. Results confirm that, although there was significant dispersion of the transmitted pulses, the system successfully distinguished automatically guided wave encoded information that could potentially be used in sub-sea oilrigs. © 2013 IOP Publishing Ltd.
KW - Ultrasonic applications
U2 - 10.1088/0964-1726/22/5/055031
DO - 10.1088/0964-1726/22/5/055031
M3 - Article
VL - 22
JO - Smart Materials and Structures
JF - Smart Materials and Structures
IS - 5
M1 - 055031
ER -