Characterization and understanding of residual stresses in a NiCoCrAlY bond coat for thermal barrier coating application

Y Chen, X Zhao, Y Dang, Ping Xiao, N Curry, N Markocsan, P Nylen

Research output: Contribution to journalArticlepeer-review


The residual stresses in a NiCoCrAlY bond coat deposited on a Ni-base superalloy substrate after oxidation at 1150 degrees C were studied by X-ray diffraction using the sin(2)psi technique. The stresses were found to be tensile; they first increased and then decreased with oxidation time. High temperature stress measurement indicated that the stress developed and built up upon cooling, predominantly within the temperature range from 1150 degrees C to 600 degrees C. Microstructural examination suggested that, due to the limited penetration depth into the bond coat, the X-ray only probed the stress in a thin surface layer consisting of the single gamma-phase formed through Al depletion during oxidation. Quantitative high temperature X-ray diffraction analysis revealed that, above 600 degrees C, the volume fraction of the beta-phase in the bond coat increased with decreasing temperature. The mechanisms of stress generation in the bond coat were examined and are discussed based on the experiments designed to isolate the contribution of possible stress generation factors. It was found that the measured bond coat stresses were mainly induced by the volume change of the bond coat associated with the precipitation of the beta-phase upon cooling.
Original languageEnglish
Pages (from-to)1-14
Number of pages14
JournalActa Materialia
Publication statusPublished - 1 Aug 2015


  • NiCoCrAlY; Bond coat; Stress; Phase transformation


Dive into the research topics of 'Characterization and understanding of residual stresses in a NiCoCrAlY bond coat for thermal barrier coating application'. Together they form a unique fingerprint.

Cite this