Computations of post-trip reactor core thermal hydraulics using a strain parameter turbulence model

M. A. Cotton, J. O. Ismael, P. J. Kirwin

    Research output: Contribution to journalArticlepeer-review

    Abstract

    Coolant flows in the cores of nuclear reactors consist of ascending vertical flows in a large number of parallel passages. Under post-trip conditions such heated turbulent flows may be modified strongly from the forced convection condition by the action of buoyancy, in particular exhibiting impaired levels of heat transfer with respect to corresponding forced convection cases. The heat transfer performance of these 'mixed convection' flows is investigated here using two physically distinct eddy viscosity turbulence models: the recent 'strain parameter' (or k-ε-S) model of Cotton and Ismael [A strain parameter turbulence model and its application to homogeneous and thin shear flows. Int. J. Heat Fluid Flow 19 (1998) 326] is examined against the benchmark low-Reynolds-number k-ε model of Launder and Sharma [Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc. Lett. Heat Mass Transfer 1 (1974) 131]. Comparison is made with three sets of heat transfer data for ascending mixed convection flows, and it is demonstrated that both turbulence models are generally successful in resolving the Nusselt number distributions occurring along the lengths of mixed convection flow passages. The mechanisms by which the strain parameter model generates reduced turbulence levels, and hence impaired heat transfer rates, is explored in comparison with a fourth set of experimental data for mixed convection flow profiles. © 2001 Elsevier Science B.V. All rights reserved.
    Original languageEnglish
    Pages (from-to)51-66
    Number of pages15
    JournalNuclear Engineering and Design
    Volume208
    Issue number1
    DOIs
    Publication statusPublished - 11 Aug 2001

    Fingerprint

    Dive into the research topics of 'Computations of post-trip reactor core thermal hydraulics using a strain parameter turbulence model'. Together they form a unique fingerprint.

    Cite this