Abstract
This paper presents a study of fibre optic bundle displacement sensor with multiple layers of transmitters. By arranging the transmitter of two-layers in certain ratio, an enhancement of the linear range as well as sensitivity can be achieved compared to conventional bifurcation arrangement. A theoretical model using the Gaussian beam assumption has been developed to characterise the response curve of the various two-layer configurations. The designed two-layer multiple transmitter fibre optic sensor is fabricated to validate the results. The predicted displacement response shows an enhancement of the linear range and sensitivity of four and two times, respectively, better than the corresponding ranges for the conventional bifurcation configuration and is validated by experimental static calibration. Harmonic excitation test is employed to deduce its dynamic displacement response behaviour. Results show constant sensitivity of about 0.363 mV/μm (absolute deviation less than 5%) over a bandwidth up to 2.2 kHz with minimum measurable displacement amplitude of about 50 nm at 2.2 kHz and signal-to-noise ratio of around 26 dB. The minimum measurable displacement is found to be 18 nm at 3.4 kHz with a signal-to-noise ratio of around 6 dB. Finally, application of the proposed sensor in structural health monitoring is demonstrated experimentally with comparison of conventional contact and non-contact sensors.
Original language | English |
---|---|
Pages (from-to) | 1-14 |
Number of pages | 14 |
Journal | Sensors and Actuators, A: Physical |
Volume | 244 |
Early online date | 17 Mar 2016 |
DOIs | |
Publication status | Published - 15 Jun 2016 |
Keywords
- Fibre optic sensor
- Intensity-modulated
- Structural health monitoring
- Two-layer multiple transmitter
- Vibration measurement