Direct solution method for initialising doubly-fed induction wind turbines in power system dynamic models

L. Holdsworth; X. G. Wu; J. B. Ekanayake; N. Jenkins

doi:10.1049/ip-gtd:20030245

Direct solution method for initialising doubly-fed induction wind turbines in power system dynamic models

L. Holdsworth, X. G. Wu, J. B. Ekanayake, N. Jenkins

Mechanical and Aerospace Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

The modelling of a doubly-fed induction generator (DFIG) wind turbine in large power system dynamic simulation software is discussed, and the steady state equivalent circuit and reduced order dynamic DFIG models are described. A direct solution method for obtaining injected rotor voltages, which satisfy the dynamic model control objectives, is derived from the approximate steady state model. An initialisation procedure is given for the reduced order dynamic DFIG machine model. Simulation results are presented from initialised dynamic DFIG wind turbine models. PQ and PV bus representations of the DFIG for load flow studies are compared and simulated with typical turbine and network data for wind farm installations.

Original language	English
Pages (from-to)	334-342
Number of pages	8
Journal	IEE Proceedings: Communications
Volume	150
Issue number	3
DOIs	https://doi.org/10.1049/ip-gtd:20030245
Publication status	Published - May 2003

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1049/ip-gtd:20030245

Cite this

@article{8ab44d9105cf489eb86fe9f426d31b17,

title = "Direct solution method for initialising doubly-fed induction wind turbines in power system dynamic models",

abstract = "The modelling of a doubly-fed induction generator (DFIG) wind turbine in large power system dynamic simulation software is discussed, and the steady state equivalent circuit and reduced order dynamic DFIG models are described. A direct solution method for obtaining injected rotor voltages, which satisfy the dynamic model control objectives, is derived from the approximate steady state model. An initialisation procedure is given for the reduced order dynamic DFIG machine model. Simulation results are presented from initialised dynamic DFIG wind turbine models. PQ and PV bus representations of the DFIG for load flow studies are compared and simulated with typical turbine and network data for wind farm installations.",

author = "L. Holdsworth and Wu, {X. G.} and Ekanayake, {J. B.} and N. Jenkins",

year = "2003",

month = may,

doi = "10.1049/ip-gtd:20030245",

language = "English",

volume = "150",

pages = "334--342",

journal = "IEE Proceedings: Communications",

issn = "1350-2425",

publisher = "IEE",

number = "3",

}

TY - JOUR

T1 - Direct solution method for initialising doubly-fed induction wind turbines in power system dynamic models

AU - Holdsworth, L.

AU - Wu, X. G.

AU - Ekanayake, J. B.

AU - Jenkins, N.

PY - 2003/5

Y1 - 2003/5

N2 - The modelling of a doubly-fed induction generator (DFIG) wind turbine in large power system dynamic simulation software is discussed, and the steady state equivalent circuit and reduced order dynamic DFIG models are described. A direct solution method for obtaining injected rotor voltages, which satisfy the dynamic model control objectives, is derived from the approximate steady state model. An initialisation procedure is given for the reduced order dynamic DFIG machine model. Simulation results are presented from initialised dynamic DFIG wind turbine models. PQ and PV bus representations of the DFIG for load flow studies are compared and simulated with typical turbine and network data for wind farm installations.

AB - The modelling of a doubly-fed induction generator (DFIG) wind turbine in large power system dynamic simulation software is discussed, and the steady state equivalent circuit and reduced order dynamic DFIG models are described. A direct solution method for obtaining injected rotor voltages, which satisfy the dynamic model control objectives, is derived from the approximate steady state model. An initialisation procedure is given for the reduced order dynamic DFIG machine model. Simulation results are presented from initialised dynamic DFIG wind turbine models. PQ and PV bus representations of the DFIG for load flow studies are compared and simulated with typical turbine and network data for wind farm installations.

U2 - 10.1049/ip-gtd:20030245

DO - 10.1049/ip-gtd:20030245

M3 - Article

SN - 1350-2425

VL - 150

SP - 334

EP - 342

JO - IEE Proceedings: Communications

JF - IEE Proceedings: Communications

IS - 3

ER -

Direct solution method for initialising doubly-fed induction wind turbines in power system dynamic models

Abstract

UN SDGs

Access to Document

Fingerprint

Cite this