Experimental studies on a combined pyrolysis/staged condensation/hydrotreatment approach to obtain biofuels and biobased chemicals

Fast pyrolysis is an efficient technology to convert lignocellulosic biomass to a liquid product. However, the high contents of oxygenated compounds and water hinder the direct utilization of pyrolysis oils. Here, we report an upgrading concept to obtain liquid products with improved product properties and enriched in valuable low molecular weight chemicals and particularly alkylphenols. It entails two steps, viz. i) pyrolysis with in-situ staged condensation at multiple kg scale followed by ii) a catalytic hydrotreatment of selected fractions using a Ru/C catalyst. Of all pyrolysis oil fractions after staged condensation, the product collected in a condenser equipped with an electrostatic precipitator (ESP) at 120 °C was identified as the most attractive for hydrotreatment when considering product yields and composition. The best hydrotreatment results (Ru/C, 350 °C, 100 bar H₂, 4 h) were achieved using beechwood and walnut shells as feedstock, resulting in a high oil yield (about 64 wt% based on pyrolysis oil fraction intake) with a higher heating value of about 37 MJ/kg and enriched in alkylphenols (about 16 wt%). Overall, it was shown that the type of biomass (beech sawdust, walnut granulates, and pine/spruce sawdust) has a limited impact on liquid and alkylphenols yields which implies feedstock flexibility of this integrated concept.