Heat analysis of single point cutting tool coated with different natural bio composite

Anirudh Kohli; Vrishabh Ghalagi; Manoj Divate; Chetan Manakatti; Md. Irshad Karigar; Divakar Poojar; Tousif Pandugol; Arun Y. Patil; Santosh Billur; Basavaraja B. Kotturshettar

doi:10.1088/1742-6596/1706/1/012186

Heat analysis of single point cutting tool coated with different natural bio composite

Anirudh Kohli, Vrishabh Ghalagi, Manoj Divate, Chetan Manakatti, Md. Irshad Karigar, Divakar Poojar, Tousif Pandugol, Arun Y. Patil, Santosh Billur, Basavaraja B. Kotturshettar

Materials Engineering

KLE Technological University

Research output: Contribution to journal › Conference article › peer-review

Abstract

The paper presents the selection of suitable coating material for a single-point cutting tool. The coated tool exhibited superior wear and heat resistance. The coating is done over an uncoated tool. Single point cutting tool coating is done according to the points and regions we found getting affected due to cutting tool operation and due to thermal effects on it due to heat. The analysis of a coated tool is compared using three different coatings. The normal cutting tool is selected and subjected to various load and thermal conditions. The properties to determine the stress, deflection, heat flux and temperature sustained is the determination of single point cutting tool of various materials.

Original language	English
Article number	012186
Pages (from-to)	1-11
Number of pages	11
Journal	Journal of Physics: Conference Series
Volume	1706
DOIs	https://doi.org/10.1088/1742-6596/1706/1/012186
Publication status	Published - Dec 2020
Event	1st International Conference on Advances in Physical Sciences and Materials 2020, ICAPSM 2020 - Coimbatore, Virtual, India Duration: 13 Aug 2020 → 14 Aug 2020

Access to Document

10.1088/1742-6596/1706/1/012186Licence: CC BY

Cite this

@article{b2a6d6dac69a45f897c8811f8f7f4d9e,

title = "Heat analysis of single point cutting tool coated with different natural bio composite",

abstract = "The paper presents the selection of suitable coating material for a single-point cutting tool. The coated tool exhibited superior wear and heat resistance. The coating is done over an uncoated tool. Single point cutting tool coating is done according to the points and regions we found getting affected due to cutting tool operation and due to thermal effects on it due to heat. The analysis of a coated tool is compared using three different coatings. The normal cutting tool is selected and subjected to various load and thermal conditions. The properties to determine the stress, deflection, heat flux and temperature sustained is the determination of single point cutting tool of various materials.",

author = "Anirudh Kohli and Vrishabh Ghalagi and Manoj Divate and Chetan Manakatti and Karigar, {Md. Irshad} and Divakar Poojar and Tousif Pandugol and Patil, {Arun Y.} and Santosh Billur and Kotturshettar, {Basavaraja B.}",

year = "2020",

month = dec,

doi = "10.1088/1742-6596/1706/1/012186",

language = "English",

volume = "1706",

pages = "1--11",

journal = "Journal of Physics: Conference Series",

issn = "1742-6588",

publisher = "IOP Publishing Ltd",

note = "1st International Conference on Advances in Physical Sciences and Materials 2020, ICAPSM 2020 ; Conference date: 13-08-2020 Through 14-08-2020",

}

TY - JOUR

T1 - Heat analysis of single point cutting tool coated with different natural bio composite

AU - Kohli, Anirudh

AU - Ghalagi, Vrishabh

AU - Divate, Manoj

AU - Manakatti, Chetan

AU - Karigar, Md. Irshad

AU - Poojar, Divakar

AU - Pandugol, Tousif

AU - Patil, Arun Y.

AU - Billur, Santosh

AU - Kotturshettar, Basavaraja B.

PY - 2020/12

Y1 - 2020/12

N2 - The paper presents the selection of suitable coating material for a single-point cutting tool. The coated tool exhibited superior wear and heat resistance. The coating is done over an uncoated tool. Single point cutting tool coating is done according to the points and regions we found getting affected due to cutting tool operation and due to thermal effects on it due to heat. The analysis of a coated tool is compared using three different coatings. The normal cutting tool is selected and subjected to various load and thermal conditions. The properties to determine the stress, deflection, heat flux and temperature sustained is the determination of single point cutting tool of various materials.

AB - The paper presents the selection of suitable coating material for a single-point cutting tool. The coated tool exhibited superior wear and heat resistance. The coating is done over an uncoated tool. Single point cutting tool coating is done according to the points and regions we found getting affected due to cutting tool operation and due to thermal effects on it due to heat. The analysis of a coated tool is compared using three different coatings. The normal cutting tool is selected and subjected to various load and thermal conditions. The properties to determine the stress, deflection, heat flux and temperature sustained is the determination of single point cutting tool of various materials.

U2 - 10.1088/1742-6596/1706/1/012186

DO - 10.1088/1742-6596/1706/1/012186

M3 - Conference article

SN - 1742-6588

VL - 1706

SP - 1

EP - 11

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

M1 - 012186

T2 - 1st International Conference on Advances in Physical Sciences and Materials 2020, ICAPSM 2020

Y2 - 13 August 2020 through 14 August 2020

ER -

Heat analysis of single point cutting tool coated with different natural bio composite

Abstract

Access to Document

Fingerprint

Cite this