Improving the performance of photovoltaic panels by using aluminum heat sink

Ian Guardian; Bayu Sutanto; Rendy Adhi Rachmanto; Syamsul Hadi; Zainal Arifin

doi:10.1007/978-981-15-4481-1_42

Improving the performance of photovoltaic panels by using aluminum heat sink

Ian Guardian, Bayu Sutanto, Rendy Adhi Rachmanto, Syamsul Hadi, Zainal Arifin^*

^*Corresponding author for this work

Department of Mechanical, Aerospace & Civil Engineering

Sebelas Maret University

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Abstract

Solar photovoltaic (PV) system has drawn the tremendous attention of researchers and governments in the past recent years. However, operating temperature of PV has major role to its efficiency and lifetime. This paper reported an experiment of aluminum heat sink as a cooling device to reduce the operating temperature and to improve the performance of PV panels. The performance of PV panels with and without aluminum heat sink were compared. Result showed that solid heat sink increased the average power output by 3.14 W and efficiency by 1.61%. Modification by perforating the fins increased the average output power by 1.79 W and efficiency by 0.60% compared to the solid heat sink. This cooling method was an effective and potential to be applied on commercial PV panels.

Original language	English
Title of host publication	Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials
Subtitle of host publication	ICE-SEAM 2019, 16—17 October 2019, Surakarta, Indonesia
Editors	Ubaidillah Sabino, Fitrian Imaduddin, Aditya Rio Prabowo
Place of Publication	Singapore
Publisher	Springer Singapore
Pages	437–448
Number of pages	12
ISBN (Electronic)	9789811544811
ISBN (Print)	9789811544804, 9789811544835
DOIs	https://doi.org/10.1007/978-981-15-4481-1_42
Publication status	Published - 2 Jun 2020
Event	6th International Conference and Exhibition on Sustainable Energy and Advanced Materials - Surakarta, Indonesia Duration: 16 Oct 2019 → 17 Oct 2019

Conference

Conference	6th International Conference and Exhibition on Sustainable Energy and Advanced Materials
Abbreviated title	ICE-SEAM 2019
Country/Territory	Indonesia
City	Surakarta
Period	16/10/19 → 17/10/19

Keywords

photovoltaic system
cooling system
experiment
aluminum heat sink

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1007/978-981-15-4481-1_42

Cite this

Guardian, I., Sutanto, B., Rachmanto, R. A., Hadi, S., & Arifin, Z. (2020). Improving the performance of photovoltaic panels by using aluminum heat sink. In U. Sabino, F. Imaduddin, & A. R. Prabowo (Eds.), Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials: ICE-SEAM 2019, 16—17 October 2019, Surakarta, Indonesia (pp. 437–448). Springer Singapore. https://doi.org/10.1007/978-981-15-4481-1_42

Guardian, Ian ; Sutanto, Bayu ; Rachmanto, Rendy Adhi et al. / Improving the performance of photovoltaic panels by using aluminum heat sink. Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials: ICE-SEAM 2019, 16—17 October 2019, Surakarta, Indonesia. editor / Ubaidillah Sabino ; Fitrian Imaduddin ; Aditya Rio Prabowo. Singapore : Springer Singapore, 2020. pp. 437–448

@inproceedings{7633d87c24804c39a2d9155c672fe806,

title = "Improving the performance of photovoltaic panels by using aluminum heat sink",

abstract = "Solar photovoltaic (PV) system has drawn the tremendous attention of researchers and governments in the past recent years. However, operating temperature of PV has major role to its efficiency and lifetime. This paper reported an experiment of aluminum heat sink as a cooling device to reduce the operating temperature and to improve the performance of PV panels. The performance of PV panels with and without aluminum heat sink were compared. Result showed that solid heat sink increased the average power output by 3.14 W and efficiency by 1.61%. Modification by perforating the fins increased the average output power by 1.79 W and efficiency by 0.60% compared to the solid heat sink. This cooling method was an effective and potential to be applied on commercial PV panels.",

keywords = "photovoltaic system, cooling system, experiment, aluminum heat sink",

author = "Ian Guardian and Bayu Sutanto and Rachmanto, {Rendy Adhi} and Syamsul Hadi and Zainal Arifin",

year = "2020",

month = jun,

day = "2",

doi = "10.1007/978-981-15-4481-1_42",

language = "English",

isbn = "9789811544804",

pages = "437–448",

editor = "Ubaidillah Sabino and Fitrian Imaduddin and Prabowo, {Aditya Rio}",

booktitle = "Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials",

publisher = "Springer Singapore",

address = "Singapore",

note = "6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019 ; Conference date: 16-10-2019 Through 17-10-2019",

}

Guardian, I, Sutanto, B, Rachmanto, RA, Hadi, S & Arifin, Z 2020, Improving the performance of photovoltaic panels by using aluminum heat sink. in U Sabino, F Imaduddin & AR Prabowo (eds), Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials: ICE-SEAM 2019, 16—17 October 2019, Surakarta, Indonesia. Springer Singapore, Singapore, pp. 437–448, 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, Surakarta, Indonesia, 16/10/19. https://doi.org/10.1007/978-981-15-4481-1_42

Improving the performance of photovoltaic panels by using aluminum heat sink. / Guardian, Ian; Sutanto, Bayu; Rachmanto, Rendy Adhi et al.
Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials: ICE-SEAM 2019, 16—17 October 2019, Surakarta, Indonesia. ed. / Ubaidillah Sabino; Fitrian Imaduddin; Aditya Rio Prabowo. Singapore: Springer Singapore, 2020. p. 437–448.

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Improving the performance of photovoltaic panels by using aluminum heat sink

AU - Guardian, Ian

AU - Sutanto, Bayu

AU - Rachmanto, Rendy Adhi

AU - Hadi, Syamsul

AU - Arifin, Zainal

PY - 2020/6/2

Y1 - 2020/6/2

N2 - Solar photovoltaic (PV) system has drawn the tremendous attention of researchers and governments in the past recent years. However, operating temperature of PV has major role to its efficiency and lifetime. This paper reported an experiment of aluminum heat sink as a cooling device to reduce the operating temperature and to improve the performance of PV panels. The performance of PV panels with and without aluminum heat sink were compared. Result showed that solid heat sink increased the average power output by 3.14 W and efficiency by 1.61%. Modification by perforating the fins increased the average output power by 1.79 W and efficiency by 0.60% compared to the solid heat sink. This cooling method was an effective and potential to be applied on commercial PV panels.

AB - Solar photovoltaic (PV) system has drawn the tremendous attention of researchers and governments in the past recent years. However, operating temperature of PV has major role to its efficiency and lifetime. This paper reported an experiment of aluminum heat sink as a cooling device to reduce the operating temperature and to improve the performance of PV panels. The performance of PV panels with and without aluminum heat sink were compared. Result showed that solid heat sink increased the average power output by 3.14 W and efficiency by 1.61%. Modification by perforating the fins increased the average output power by 1.79 W and efficiency by 0.60% compared to the solid heat sink. This cooling method was an effective and potential to be applied on commercial PV panels.

KW - photovoltaic system

KW - cooling system

KW - experiment

KW - aluminum heat sink

U2 - 10.1007/978-981-15-4481-1_42

DO - 10.1007/978-981-15-4481-1_42

M3 - Conference contribution

SN - 9789811544804

SN - 9789811544835

SP - 437

EP - 448

BT - Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials

A2 - Sabino, Ubaidillah

A2 - Imaduddin, Fitrian

A2 - Prabowo, Aditya Rio

PB - Springer Singapore

CY - Singapore

T2 - 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials

Y2 - 16 October 2019 through 17 October 2019

ER -

Guardian I, Sutanto B, Rachmanto RA, Hadi S, Arifin Z. Improving the performance of photovoltaic panels by using aluminum heat sink. In Sabino U, Imaduddin F, Prabowo AR, editors, Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials: ICE-SEAM 2019, 16—17 October 2019, Surakarta, Indonesia. Singapore: Springer Singapore. 2020. p. 437–448 doi: 10.1007/978-981-15-4481-1_42

Improving the performance of photovoltaic panels by using aluminum heat sink

Abstract

Conference

Keywords

UN SDGs

Access to Document

Fingerprint

Cite this