Ink jet printing of PZT aqueous ceramic suspensions

J. Windle; B. Derby

doi:10.1023/A:1006689713205

Ink jet printing of PZT aqueous ceramic suspensions

Research output: Contribution to journal › Article › peer-review

Abstract

The feasibility of printing suspensions of a common electroceramic, lead zirconate titanate (PZT) by ink jet printing was assessed. For this study, the Epson Stylus 500C was used. Printing was carried out on an ashless filter paper using 20 overprinted layers. Overprinted samples were fired to remove the ashless paper, and then sintered. Following this, a thermogravimetric (TGA) study was undertaken of the binder phase removal. Complex two-dimensional shapes were successfully produced, thus confirming the feasibility of producing a dilute aqueous suspension of PZT.

Original language	English
Pages (from-to)	87-90
Number of pages	3
Journal	Journal Of Materials Science Letters
Volume	18
Issue number	2
DOIs	https://doi.org/10.1023/A:1006689713205
Publication status	Published - 1 Jan 1999

Access to Document

10.1023/A:1006689713205

Cite this

@article{c23c3ac57a4845c9ba373e8da486a8a4,

title = "Ink jet printing of PZT aqueous ceramic suspensions",

abstract = "The feasibility of printing suspensions of a common electroceramic, lead zirconate titanate (PZT) by ink jet printing was assessed. For this study, the Epson Stylus 500C was used. Printing was carried out on an ashless filter paper using 20 overprinted layers. Overprinted samples were fired to remove the ashless paper, and then sintered. Following this, a thermogravimetric (TGA) study was undertaken of the binder phase removal. Complex two-dimensional shapes were successfully produced, thus confirming the feasibility of producing a dilute aqueous suspension of PZT.",

author = "J. Windle and B. Derby",

year = "1999",

month = jan,

day = "1",

doi = "10.1023/A:1006689713205",

language = "English",

volume = "18",

pages = "87--90",

journal = "Journal Of Materials Science Letters",

issn = "1573-4811",

publisher = "Chapman \& Hall",

number = "2",

}

TY - JOUR

T1 - Ink jet printing of PZT aqueous ceramic suspensions

AU - Windle, J.

AU - Derby, B.

PY - 1999/1/1

Y1 - 1999/1/1

N2 - The feasibility of printing suspensions of a common electroceramic, lead zirconate titanate (PZT) by ink jet printing was assessed. For this study, the Epson Stylus 500C was used. Printing was carried out on an ashless filter paper using 20 overprinted layers. Overprinted samples were fired to remove the ashless paper, and then sintered. Following this, a thermogravimetric (TGA) study was undertaken of the binder phase removal. Complex two-dimensional shapes were successfully produced, thus confirming the feasibility of producing a dilute aqueous suspension of PZT.

AB - The feasibility of printing suspensions of a common electroceramic, lead zirconate titanate (PZT) by ink jet printing was assessed. For this study, the Epson Stylus 500C was used. Printing was carried out on an ashless filter paper using 20 overprinted layers. Overprinted samples were fired to remove the ashless paper, and then sintered. Following this, a thermogravimetric (TGA) study was undertaken of the binder phase removal. Complex two-dimensional shapes were successfully produced, thus confirming the feasibility of producing a dilute aqueous suspension of PZT.

U2 - 10.1023/A:1006689713205

DO - 10.1023/A:1006689713205

M3 - Article

SN - 1573-4811

VL - 18

SP - 87

EP - 90

JO - Journal Of Materials Science Letters

JF - Journal Of Materials Science Letters

IS - 2

ER -

Ink jet printing of PZT aqueous ceramic suspensions

Abstract

Access to Document

Fingerprint

Cite this