Intermodulation distortion in wide-band dual-mode bulk ferroelectric bandpass filters

Tanusri Chakraborty; Ian Hunter; Rajnish Kurchania; Andrew Bell; Subhasish Chakraborty

doi:10.1109/MWSYM.2005.1516675

Intermodulation distortion in wide-band dual-mode bulk ferroelectric bandpass filters

Tanusri Chakraborty, Ian Hunter, Rajnish Kurchania, Andrew Bell, Subhasish Chakraborty

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

279 Downloads (Pure)

Abstract

An investigation into intermodulation (IM) distortion in bulk ferroelectric bandpass filters is presented. The main objective has been to study the effect of the response time of ferroelectric material on IM distortion. In order to investigate the response time IM measurements with wide carrier frequency spacing must be performed. Thus a novel planar dual-mode bandpass filter, with 600MHz bandwidth at 2GHz, has been designed and fabricated on a bulk Barium Strontium Titanate (BST) substrate. The two tone third-order IM has been measured for a range of signal separations in order to estimate the material response time. © 2005 IEEE.

Original language	English
Title of host publication	IEEE MTT-S International Microwave Symposium Digest\|IEEE MTT S Int Microwave Symp Dig
Pages	615-618
Number of pages	3
Volume	2005
DOIs	https://doi.org/10.1109/MWSYM.2005.1516675
Publication status	Published - 2005
Event	2005 IEEE MTT-S International Microwave Symposium - Long Beach, CA Duration: 1 Jul 2005 → …

Conference

Conference	2005 IEEE MTT-S International Microwave Symposium
City	Long Beach, CA
Period	1/07/05 → …

Keywords

Disc resonator
Dual-mode filter
Ferroelectric material
Intermodulation distortion
Response time

Access to Document

10.1109/MWSYM.2005.1516675

FULL-TEXT

Cite this

@inproceedings{224b6e2bf0b243098239fd5ae6976307,

title = "Intermodulation distortion in wide-band dual-mode bulk ferroelectric bandpass filters",

abstract = "An investigation into intermodulation (IM) distortion in bulk ferroelectric bandpass filters is presented. The main objective has been to study the effect of the response time of ferroelectric material on IM distortion. In order to investigate the response time IM measurements with wide carrier frequency spacing must be performed. Thus a novel planar dual-mode bandpass filter, with 600MHz bandwidth at 2GHz, has been designed and fabricated on a bulk Barium Strontium Titanate (BST) substrate. The two tone third-order IM has been measured for a range of signal separations in order to estimate the material response time. {\textcopyright} 2005 IEEE.",

keywords = "Disc resonator, Dual-mode filter, Ferroelectric material, Intermodulation distortion, Response time",

author = "Tanusri Chakraborty and Ian Hunter and Rajnish Kurchania and Andrew Bell and Subhasish Chakraborty",

year = "2005",

doi = "10.1109/MWSYM.2005.1516675",

language = "English",

isbn = "0780388461",

volume = "2005",

pages = "615--618",

booktitle = "IEEE MTT-S International Microwave Symposium Digest|IEEE MTT S Int Microwave Symp Dig",

note = "2005 IEEE MTT-S International Microwave Symposium ; Conference date: 01-07-2005",

}

Chakraborty, T, Hunter, I, Kurchania, R, Bell, A & Chakraborty, S 2005, Intermodulation distortion in wide-band dual-mode bulk ferroelectric bandpass filters. in IEEE MTT-S International Microwave Symposium Digest|IEEE MTT S Int Microwave Symp Dig. vol. 2005, pp. 615-618, 2005 IEEE MTT-S International Microwave Symposium, Long Beach, CA, 1/07/05. https://doi.org/10.1109/MWSYM.2005.1516675

TY - GEN

T1 - Intermodulation distortion in wide-band dual-mode bulk ferroelectric bandpass filters

AU - Chakraborty, Tanusri

AU - Hunter, Ian

AU - Kurchania, Rajnish

AU - Bell, Andrew

AU - Chakraborty, Subhasish

PY - 2005

Y1 - 2005

N2 - An investigation into intermodulation (IM) distortion in bulk ferroelectric bandpass filters is presented. The main objective has been to study the effect of the response time of ferroelectric material on IM distortion. In order to investigate the response time IM measurements with wide carrier frequency spacing must be performed. Thus a novel planar dual-mode bandpass filter, with 600MHz bandwidth at 2GHz, has been designed and fabricated on a bulk Barium Strontium Titanate (BST) substrate. The two tone third-order IM has been measured for a range of signal separations in order to estimate the material response time. © 2005 IEEE.

AB - An investigation into intermodulation (IM) distortion in bulk ferroelectric bandpass filters is presented. The main objective has been to study the effect of the response time of ferroelectric material on IM distortion. In order to investigate the response time IM measurements with wide carrier frequency spacing must be performed. Thus a novel planar dual-mode bandpass filter, with 600MHz bandwidth at 2GHz, has been designed and fabricated on a bulk Barium Strontium Titanate (BST) substrate. The two tone third-order IM has been measured for a range of signal separations in order to estimate the material response time. © 2005 IEEE.

KW - Disc resonator

KW - Dual-mode filter

KW - Ferroelectric material

KW - Intermodulation distortion

KW - Response time

U2 - 10.1109/MWSYM.2005.1516675

DO - 10.1109/MWSYM.2005.1516675

M3 - Conference contribution

SN - 0780388461

SN - 9780780388468

VL - 2005

SP - 615

EP - 618

BT - IEEE MTT-S International Microwave Symposium Digest|IEEE MTT S Int Microwave Symp Dig

T2 - 2005 IEEE MTT-S International Microwave Symposium

Y2 - 1 July 2005

ER -

Intermodulation distortion in wide-band dual-mode bulk ferroelectric bandpass filters

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this