Large capacity multi-float configurations for the wave energy converter M4 using a time-domain linear diffraction model

Peter Stansby, Efrain Carpintero Moreno, Timothy Stallard

    Research output: Contribution to journalArticlepeer-review

    Abstract

    The moored three-float line absorber WEC M4 has been developed to optimise power capture through experiments and linear diffraction modelling. With the progression down wave from small to medium to large floats, the device heads naturally into the wave direction. The bow and mid floats are rigidly connected by a beam and a beam from the stern float is connected to the hinge point above the mid float for power take off (PTO). Increasing the bow to mid float spacing to be more than 50% greater than the mid to stern float spacing has been found to improve power capture. To increase power capture further and potentially reduce electricity generation cost the number of mid floats and stern floats is increased while maintaining a single bow float for mooring connection. The bow and mid floats still form a rigid body while the stern floats may respond independently. A time domain linear diffraction model based on Cummins method has been applied to configurations of 121, 123, 132, 133, and 134 floats where the numbers indicate the number of floats: bow, mid, stern. This shows how power capture is increased while response remains similar. We only consider uni-directional (long-crested) waves with narrow band width typical of swell. By considering scatter diagrams for various offshore sites capacities may range from 3.7 MW to 17.3 MW for the eight float system with a capacity factor of 1/3 while the cost of electricity assuming capital cost to be a fixed multiple of steel cost is reduced from that for the three-float system.
    Original languageEnglish
    Pages (from-to)53-64
    Number of pages9
    JournalApplied Ocean Research
    Volume58
    DOIs
    Publication statusPublished - 8 Sept 2017

    Fingerprint

    Dive into the research topics of 'Large capacity multi-float configurations for the wave energy converter M4 using a time-domain linear diffraction model'. Together they form a unique fingerprint.

    Cite this