Abstract
The flow structure around wall mounted circular cylinders of finite heights is numerically investigated via large eddy simulation (LES). The cylinder aspect ratios (AR) are 6 and 10 and the Reynolds number (Re) based on cylinder diameter and free stream velocity is 20,000 for both cases. The cantilever cylinder mounted on a flat plate is chosen since it gives insight into two entirely different flow phenomena; the tip effects of the free end (which show strong three-dimensional wake structures) and the base or junction effects (due to interaction of flow between the cylinder and the flat plate). Regular vortex shedding is found in the wake of the higher aspect ratio case as was anticipated, along with a strong downwash originating from the flow over the free end of the cylinder, whereas irregular and intermittent vortex shedding occurs in the lower aspect ratio case. Pressure distributions are computed along the length of the cylinder and compared to experimental results. Lift and drag values are also computed, along with Strouhal numbers. © 2007 Elsevier Inc. All rights reserved.
| Original language | English |
|---|---|
| Pages (from-to) | 561-574 |
| Number of pages | 13 |
| Journal | International Journal of Heat and Fluid Flow |
| Volume | 28 |
| Issue number | 4 |
| DOIs | |
| Publication status | Published - Aug 2007 |
Keywords
- Embedded refinement
- Finite cylinder
- Free end effect
- Large eddy simulation
- Unstructured finite volumes
- Vortex shedding