Measurements of thickness for metallic plates with co-axial holes using a novel analytical method with the modified integration range

Wuliang Yin; Ruocheng Huang; Mingyang Lu; Zhijie Zhang; Anthony Peyton

doi:10.1109/ACCESS.2020.3035333

Measurements of thickness for metallic plates with co-axial holes using a novel analytical method with the modified integration range

Wuliang Yin, Ruocheng Huang, Mingyang Lu, Zhijie Zhang, Anthony Peyton

EEE - Academic & Research

Research output: Contribution to journal › Article › peer-review

102 Downloads (Pure)

Abstract

The existence of the hole on a plate affects the calculation of eddy current problems. Consequently, the accuracy for the prediction of the material properties decreases if the effect of the hole is not taken into account. In this paper, a novel analytical method based on the modified integration range is proposed which can address the presence of the hole. Due to the presence of the hole, the conventional Dodd-Deeds analytical solution cannot be used to calculate the inductance change. Therefore, a revised upper integration limit is introduced to replace the original limit – ∞ when using the co-axially air-core electromagnetic sensor. With the presence of the hole, the magnitude of the received signal reduces, and the peak frequency feature changes. The analytical method is validated by measured and numerical simulation results. It is found that the upper limit is related to the radius of the open hole. With the new technique, the thickness of sample plates with holes can be estimated based on the peak frequency feature.

Original language	English
Pages (from-to)	1-1
Journal	IEEE Access
DOIs	https://doi.org/10.1109/ACCESS.2020.3035333
Publication status	Published - 2 Nov 2020

Access to Document

10.1109/ACCESS.2020.3035333Licence: CC BY

09246514Final published version, 962 KBLicence: CC BY

Electromagnetic Sensing Group
Peyton, A. (PI), Fletcher, A. (Researcher), Daniels, D. (CoI), Conniffe, D. (PGR student), Podd, F. (PI), Davidson, J. (Researcher), Anderson, J. (Support team), Wilson, J. (Researcher), Marsh, L. (PI), O'Toole, M. (PI), Watson, S. (PGR student), Yin, W. (PI), Regan, A. (PGR student), Williams, K. (Researcher), Rana, S. (Researcher), Khalil, K. (PGR student), Hills, D. (PGR student), Whyte, C. (PGR student), Wang, C. (PGR student), Hodgskin-Brown, R. (PGR student), Dadkhahtehrani, F. (PGR student), Forster, S. (PGR student), Zhu, F. (PGR student), Yu, K. (PGR student), Xiong, L. (PGR student), Lu, T. (PGR student), Zhang, L. (PGR student), Lyu, R. (PGR student), Zhu, R. (PGR student), She, S. (PGR student), Meng, T. (PGR student), Pang, X. (PGR student), Zheng, X. (PGR student), Bai, X. (PGR student), Zou, X. (PGR student), Ding, Y. (PGR student), Shao, Y. (PGR student), Xia, Z. (PGR student), Zhang, Z. (PGR student), Khangerey, R. (PGR student) & Lawless, B. (Researcher)
1/10/04 → …
Project: Research

Cite this

@article{74101a62441143fb9fdc20b30ef3647f,

title = "Measurements of thickness for metallic plates with co-axial holes using a novel analytical method with the modified integration range",

abstract = "The existence of the hole on a plate affects the calculation of eddy current problems. Consequently, the accuracy for the prediction of the material properties decreases if the effect of the hole is not taken into account. In this paper, a novel analytical method based on the modified integration range is proposed which can address the presence of the hole. Due to the presence of the hole, the conventional Dodd-Deeds analytical solution cannot be used to calculate the inductance change. Therefore, a revised upper integration limit is introduced to replace the original limit – ∞ when using the co-axially air-core electromagnetic sensor. With the presence of the hole, the magnitude of the received signal reduces, and the peak frequency feature changes. The analytical method is validated by measured and numerical simulation results. It is found that the upper limit is related to the radius of the open hole. With the new technique, the thickness of sample plates with holes can be estimated based on the peak frequency feature.",

author = "Wuliang Yin and Ruocheng Huang and Mingyang Lu and Zhijie Zhang and Anthony Peyton",

year = "2020",

month = nov,

day = "2",

doi = "10.1109/ACCESS.2020.3035333",

language = "English",

pages = "1--1",

journal = "IEEE Access",

issn = "2169-3536",

publisher = "IEEE",

}

TY - JOUR

T1 - Measurements of thickness for metallic plates with co-axial holes using a novel analytical method with the modified integration range

AU - Yin, Wuliang

AU - Huang, Ruocheng

AU - Lu, Mingyang

AU - Zhang, Zhijie

AU - Peyton, Anthony

PY - 2020/11/2

Y1 - 2020/11/2

N2 - The existence of the hole on a plate affects the calculation of eddy current problems. Consequently, the accuracy for the prediction of the material properties decreases if the effect of the hole is not taken into account. In this paper, a novel analytical method based on the modified integration range is proposed which can address the presence of the hole. Due to the presence of the hole, the conventional Dodd-Deeds analytical solution cannot be used to calculate the inductance change. Therefore, a revised upper integration limit is introduced to replace the original limit – ∞ when using the co-axially air-core electromagnetic sensor. With the presence of the hole, the magnitude of the received signal reduces, and the peak frequency feature changes. The analytical method is validated by measured and numerical simulation results. It is found that the upper limit is related to the radius of the open hole. With the new technique, the thickness of sample plates with holes can be estimated based on the peak frequency feature.

AB - The existence of the hole on a plate affects the calculation of eddy current problems. Consequently, the accuracy for the prediction of the material properties decreases if the effect of the hole is not taken into account. In this paper, a novel analytical method based on the modified integration range is proposed which can address the presence of the hole. Due to the presence of the hole, the conventional Dodd-Deeds analytical solution cannot be used to calculate the inductance change. Therefore, a revised upper integration limit is introduced to replace the original limit – ∞ when using the co-axially air-core electromagnetic sensor. With the presence of the hole, the magnitude of the received signal reduces, and the peak frequency feature changes. The analytical method is validated by measured and numerical simulation results. It is found that the upper limit is related to the radius of the open hole. With the new technique, the thickness of sample plates with holes can be estimated based on the peak frequency feature.

U2 - 10.1109/ACCESS.2020.3035333

DO - 10.1109/ACCESS.2020.3035333

M3 - Article

SN - 2169-3536

SP - 1

EP - 1

JO - IEEE Access

JF - IEEE Access

ER -

Measurements of thickness for metallic plates with co-axial holes using a novel analytical method with the modified integration range

Abstract

Access to Document

Fingerprint

Projects

Electromagnetic Sensing Group

Cite this