Microstructural characterisation and corrosion behaviour of electroless Ni-W-P deposits of mixed nanocrystalline/amorphous structures

H. Liu, R. X. Guo, F. Viejo, G. E. Thompson, Z. Liu

    Research output: Contribution to journalArticlepeer-review

    Abstract

    An investigation has been undertaken of the influence of the mixed nanocrystalline and amorphous microstructure on the corrosion behaviour of electroless Ni-5·5W-6·5P (wt-%) deposits on steel substrates. The effects of annealing temperature on microstructure evolution were investigated. The corrosion behaviour of the deposits was evaluated by potentiodynamic polarisation in 0·5M H2SO4 solution and EIS measurements in 3·5%NaCl solution. Relationships between the microstructure and corrosion mechanisms of the as plated and the annealed deposits were considered by reference to microstructural information, including degree of crystallisation, grain sizes of both nickel and Ni3P phases, porosity development, microstrains and residual stresses. © 2013 Institute of Metal Finishing.
    Original languageEnglish
    Pages (from-to)101-106
    Number of pages5
    JournalTransactions of the Institute of Metal Finishing
    Volume91
    Issue number2
    DOIs
    Publication statusPublished - Mar 2013

    Keywords

    • Corrosion
    • Electroless plating
    • Heat treatment
    • Microstructure
    • Ni-W-P
    • XRD

    Fingerprint

    Dive into the research topics of 'Microstructural characterisation and corrosion behaviour of electroless Ni-W-P deposits of mixed nanocrystalline/amorphous structures'. Together they form a unique fingerprint.

    Cite this