Microstructure simulation and ballistic behaviour of weld zones in friction stir welds in high strength aluminium 7xxx plate

The effect of friction stir welding (FSW) on the knockdown in properties and failure mechanisms of high strength aluminium plate (AA7010-T7651) under ballistic impact has been investigated by modelling and ballistic testing, simulated, and actual weld zone microstructures, in order to systematically study the link to weld microstructural variation. FSW of thick plate leads to an extremely wide heat affected zone (HAZ). The microstructures within the weld zones were successfully modelled and simulated. However, the maximum loss of hardness in the HAZ resulted in only a 20% reduction in the ballistic limit (V50). The maximum V50 was associated with the highest level of hardness reached prior to a change in failure mechanism, from ductile hole enlargement, using an armour piercing (AP) projectile, or plugging with a fragment simulation projectile (FSP) to excessive spalling and associated adiabatic shear banding at too high hardness levels. The behaviour of the nugget zone has also been examined. The trends in the ballistic data are discussed in the context of the weld zone microstructures and fracture mechanisms. © 2011 Elsevier B.V.