Skip to main navigation Skip to search Skip to main content

On the compression of aluminium foam structures under shock

    • Cranfield University

    Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

    246 Downloads (Pure)

    Abstract

    Foam-based materials have an important role as both blast and impact mitigators, with their extended sub-surface structures providing multiple redundant routes for load management and distribution in the event of failure. In order to further elucidate underlying stress management mechanisms at high strain-rates, here, open cell and closed cell Aluminium were investigated via the plate-impact technique. These experiments allowed the material to be loaded under a macroscale one-dimensional state of strain. The nature of pore collapse was monitored via manganin stress gauges at the target rear surface, with resultant data related back to changes in microstructure via microstructural analysis of both un-impacted and recovered target material. Results indicated crushing of the open cell foam occurred without retarding the flyer plate and the observed shock pressures suggested the degree of compaction increased with impact velocity. The higher density closed cell foam caused significant deceleration of the flyer plate during passage through the specimen and significantly lower shock pressures were observed at the anvil compared to the open cell material.
    Original languageEnglish
    Title of host publicationSHOCK COMPRESSION OF CONDENSED MATTER - 2015
    Subtitle of host publicationProceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter
    Volume1793
    DOIs
    Publication statusPublished - 13 Jan 2017

    Fingerprint

    Dive into the research topics of 'On the compression of aluminium foam structures under shock'. Together they form a unique fingerprint.

    Cite this