Activities per year
Abstract
There are approximately over 2.5 million bridges throughout the world, built to
withstand massive forces and last for decades or centuries but very unlikely to last forever. According to a recent survey, there are more than 64,000 bridges in the US that have been declared as structurally deficient. Moreover, recent bridge collapse incidents in Italy, South Africa, United States and India have resulted in unplanned bridge closures affecting the economy of a state, traffic congestion, negative impact on day to day activities and in some extreme cases led to loss of life due to complete structural collapse. Therefore, law making agencies are pushed into paying greater attention to structural rehabilitation. Performance
evaluation of bridges includes visual inspection, destructive and non-destructive testing. It has been stated that “Regardless of the fact that many structure testing methods have so far been developed, visual inspection is likely to remain the most significant aid for bridge condition assessment, especially for smaller typical structures”. Results from inspection serve as a foundation for engineers to suggest if further testing (destructive or non-destructive) is required. However, precision and accuracy greatly vary with qualification, motivation and
equipment of persons conducting these inspections. This paper emphasizes the use of modern day technology by presenting a workflow of bridge inspection namely, visual inspection to address limitations and difficulties faced by engineers in assessing performance of bridges. It involves the use of lidar to capture, on-site, an image of the structure with all its imperfections such as cracks, corrosion, spalling, signs of corrosion, seepage marks, weathering, segregation, honeycombing etc. The processed image is displayed in an immersive 3D virtual reality environment for assessment. Visual inspection through virtual reality (VR) promises to be a highly efficient and highly powerful inspection technique. Evaluation will become more reliable and accurate which will make engineers capable of effectively deciding the next step of rehabilitation. This technique is critically analyzed, interpreted and compared with traditional inspection methods to highlight the potentially improved efficiency of the proposed workflow. It is intended that the research findings will greatly contribute to the industrial development by raising standards and efficiency of bridge performance evaluation.
withstand massive forces and last for decades or centuries but very unlikely to last forever. According to a recent survey, there are more than 64,000 bridges in the US that have been declared as structurally deficient. Moreover, recent bridge collapse incidents in Italy, South Africa, United States and India have resulted in unplanned bridge closures affecting the economy of a state, traffic congestion, negative impact on day to day activities and in some extreme cases led to loss of life due to complete structural collapse. Therefore, law making agencies are pushed into paying greater attention to structural rehabilitation. Performance
evaluation of bridges includes visual inspection, destructive and non-destructive testing. It has been stated that “Regardless of the fact that many structure testing methods have so far been developed, visual inspection is likely to remain the most significant aid for bridge condition assessment, especially for smaller typical structures”. Results from inspection serve as a foundation for engineers to suggest if further testing (destructive or non-destructive) is required. However, precision and accuracy greatly vary with qualification, motivation and
equipment of persons conducting these inspections. This paper emphasizes the use of modern day technology by presenting a workflow of bridge inspection namely, visual inspection to address limitations and difficulties faced by engineers in assessing performance of bridges. It involves the use of lidar to capture, on-site, an image of the structure with all its imperfections such as cracks, corrosion, spalling, signs of corrosion, seepage marks, weathering, segregation, honeycombing etc. The processed image is displayed in an immersive 3D virtual reality environment for assessment. Visual inspection through virtual reality (VR) promises to be a highly efficient and highly powerful inspection technique. Evaluation will become more reliable and accurate which will make engineers capable of effectively deciding the next step of rehabilitation. This technique is critically analyzed, interpreted and compared with traditional inspection methods to highlight the potentially improved efficiency of the proposed workflow. It is intended that the research findings will greatly contribute to the industrial development by raising standards and efficiency of bridge performance evaluation.
Original language | English |
---|---|
Number of pages | 12 |
Publication status | Published - 14 Jun 2018 |
Event | 6th European Conference on Computational Mechanics (ECCM 6) 7th European Conference on Computational Fluid Dynamics (ECFD 7) - Scottish Event Campus, Glasgow, United Kingdom Duration: 11 Jun 2018 → 15 Jun 2018 http://www.eccm-ecfd2018.org/frontal/venue.asp |
Conference
Conference | 6th European Conference on Computational Mechanics (ECCM 6) 7th European Conference on Computational Fluid Dynamics (ECFD 7) |
---|---|
Abbreviated title | ECCM-ECFD 2018 |
Country/Territory | United Kingdom |
City | Glasgow |
Period | 11/06/18 → 15/06/18 |
Internet address |
Keywords
- Visual Inspection
- Virtual Reality
- Bridge Inspection
- Bridge Performance
- Inspection Techniques
- Performance Evaluation
- Structural Rehabilitation
Research Beacons, Institutes and Platforms
- Digital Futures
Fingerprint
Dive into the research topics of 'Performance evaluation of bridges using virtual reality'. Together they form a unique fingerprint.Activities
- 1 Invited talk
-
Virtual Reality: Looking Inside the Box
Margetts, L. (Invited speaker)
20 May 2019Activity: Talk or presentation › Invited talk › Research
File