TY - JOUR

T1 - Retrogressive failure of a static granular layer on an inclined plane

AU - Russell, Aaron

AU - Johnson, Christopher

AU - Edwards, Andrew

AU - Viroulet, Sylvain

AU - Melo Da Rocha, Francisco

AU - Gray, John

PY - 2019/6/25

Y1 - 2019/6/25

N2 - When a layer of static grains on a sufficiently steep slope is disturbed, an upslope-propagating erosion wave, or retrogressive failure, may form that separates the initially static material from a downslope region of flowing grains. This paper shows that a relatively simple depth-averaged avalanche model with frictional hysteresis is sufficient to capture a planar retrogressive failure that is independent of the cross slope coordinate. The hysteresis is modelled with a non-monotonic effective basal friction law that has static, intermediate (velocity decreasing) and dynamic (velocity increasing) regimes. Both experiments and time-dependent numerical simulations show that steadily travelling retrogressive waves rapidly form in this system and a travelling wave ansatz is therefore used to derive a one-dimensional depth-averaged exact solution. The speed of the wave is determined by a critical point in the ordinary differential equation for the thickness. The critical point lies in the intermediate frictional regime, at the point where the friction exactly balances the downslope component of gravity. The retrogressive wave is therefore a sensitive test of the functional form of the friction law in this regime, where steady uniform flows are unstable and so cannot be used to determine the friction law directly. Upper and lower bounds for the existence of retrogressive waves in terms of the initial layer depth and the slope inclination are found and shown to be in good agreement with the experimentally determined phase diagram. For the friction law proposed by Edwards et al. (2017, 2019) the magnitude of the wave speed is slightly under-predicted, but, for a given initial layer thickness, the exact solution accurately predicts an increase in the wave speed with higher inclinations. The model also captures the finite wave speed at the onset of retrogressive failure observed in experiments.

AB - When a layer of static grains on a sufficiently steep slope is disturbed, an upslope-propagating erosion wave, or retrogressive failure, may form that separates the initially static material from a downslope region of flowing grains. This paper shows that a relatively simple depth-averaged avalanche model with frictional hysteresis is sufficient to capture a planar retrogressive failure that is independent of the cross slope coordinate. The hysteresis is modelled with a non-monotonic effective basal friction law that has static, intermediate (velocity decreasing) and dynamic (velocity increasing) regimes. Both experiments and time-dependent numerical simulations show that steadily travelling retrogressive waves rapidly form in this system and a travelling wave ansatz is therefore used to derive a one-dimensional depth-averaged exact solution. The speed of the wave is determined by a critical point in the ordinary differential equation for the thickness. The critical point lies in the intermediate frictional regime, at the point where the friction exactly balances the downslope component of gravity. The retrogressive wave is therefore a sensitive test of the functional form of the friction law in this regime, where steady uniform flows are unstable and so cannot be used to determine the friction law directly. Upper and lower bounds for the existence of retrogressive waves in terms of the initial layer depth and the slope inclination are found and shown to be in good agreement with the experimentally determined phase diagram. For the friction law proposed by Edwards et al. (2017, 2019) the magnitude of the wave speed is slightly under-predicted, but, for a given initial layer thickness, the exact solution accurately predicts an increase in the wave speed with higher inclinations. The model also captures the finite wave speed at the onset of retrogressive failure observed in experiments.

U2 - https://doi.org/10.1017/jfm.2019.215

DO - https://doi.org/10.1017/jfm.2019.215

M3 - Article

SN - 0022-1120

VL - 869

SP - 313

EP - 340

JO - Journal of Fluid Mechanics

JF - Journal of Fluid Mechanics

ER -