Selection of auxiliary input signal and location of a SVC for damping electromechanical oscillations

J. Chen; J. V. Milanovic; F. M. Hughes

doi:10.1109/PESW.2001.916921

Selection of auxiliary input signal and location of a SVC for damping electromechanical oscillations

J. Chen, J. V. Milanovic, F. M. Hughes

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Abstract

This paper presents detailed analysis of the effectiveness of different input signals used as auxiliary control signals for Static VAR Compensators (SVCs) for damping of power system oscillations. The influence of the location of the SVC in power system on its effectiveness in damping of system oscillations is also analysed. Different control strategies were used to assess the most appropriate auxiliary signal and the best location of the SVC for achieving good damping of electromechanical oscillations. The study presented in the paper was carried out on a single machine - three bus system under different operating conditions.

Original language	English
Title of host publication	Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference\|Proc IEEE Power Eng Soc Trans Distrib Conf
Pages	623-627
Number of pages	4
Volume	2
DOIs	https://doi.org/10.1109/PESW.2001.916921
Publication status	Published - 2001
Event	2001 IEEE Power Engineering Society Winter Meeting - Columbus, OH Duration: 1 Jul 2001 → …

Conference

Conference	2001 IEEE Power Engineering Society Winter Meeting
City	Columbus, OH
Period	1/07/01 → …

Keywords

Damping
Electromechanical oscillation
Power system dynamics
SVC

Access to Document

10.1109/PESW.2001.916921

Cite this

@inproceedings{14b8665de12b4bb48e0cb588a62e815e,

title = "Selection of auxiliary input signal and location of a SVC for damping electromechanical oscillations",

abstract = "This paper presents detailed analysis of the effectiveness of different input signals used as auxiliary control signals for Static VAR Compensators (SVCs) for damping of power system oscillations. The influence of the location of the SVC in power system on its effectiveness in damping of system oscillations is also analysed. Different control strategies were used to assess the most appropriate auxiliary signal and the best location of the SVC for achieving good damping of electromechanical oscillations. The study presented in the paper was carried out on a single machine - three bus system under different operating conditions.",

keywords = "Damping, Electromechanical oscillation, Power system dynamics, SVC",

author = "J. Chen and Milanovic, {J. V.} and Hughes, {F. M.}",

year = "2001",

doi = "10.1109/PESW.2001.916921",

language = "English",

volume = "2",

pages = "623--627",

booktitle = "Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference|Proc IEEE Power Eng Soc Trans Distrib Conf",

note = "2001 IEEE Power Engineering Society Winter Meeting ; Conference date: 01-07-2001",

}

Chen, J, Milanovic, JV & Hughes, FM 2001, Selection of auxiliary input signal and location of a SVC for damping electromechanical oscillations. in Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference|Proc IEEE Power Eng Soc Trans Distrib Conf. vol. 2, pp. 623-627, 2001 IEEE Power Engineering Society Winter Meeting, Columbus, OH, 1/07/01. https://doi.org/10.1109/PESW.2001.916921

Selection of auxiliary input signal and location of a SVC for damping electromechanical oscillations. / Chen, J.; Milanovic, J. V.; Hughes, F. M.
Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference|Proc IEEE Power Eng Soc Trans Distrib Conf. Vol. 2 2001. p. 623-627.

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Selection of auxiliary input signal and location of a SVC for damping electromechanical oscillations

AU - Chen, J.

AU - Milanovic, J. V.

AU - Hughes, F. M.

PY - 2001

Y1 - 2001

N2 - This paper presents detailed analysis of the effectiveness of different input signals used as auxiliary control signals for Static VAR Compensators (SVCs) for damping of power system oscillations. The influence of the location of the SVC in power system on its effectiveness in damping of system oscillations is also analysed. Different control strategies were used to assess the most appropriate auxiliary signal and the best location of the SVC for achieving good damping of electromechanical oscillations. The study presented in the paper was carried out on a single machine - three bus system under different operating conditions.

AB - This paper presents detailed analysis of the effectiveness of different input signals used as auxiliary control signals for Static VAR Compensators (SVCs) for damping of power system oscillations. The influence of the location of the SVC in power system on its effectiveness in damping of system oscillations is also analysed. Different control strategies were used to assess the most appropriate auxiliary signal and the best location of the SVC for achieving good damping of electromechanical oscillations. The study presented in the paper was carried out on a single machine - three bus system under different operating conditions.

KW - Damping

KW - Electromechanical oscillation

KW - Power system dynamics

KW - SVC

U2 - 10.1109/PESW.2001.916921

DO - 10.1109/PESW.2001.916921

M3 - Conference contribution

VL - 2

SP - 623

EP - 627

BT - Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference|Proc IEEE Power Eng Soc Trans Distrib Conf

T2 - 2001 IEEE Power Engineering Society Winter Meeting

Y2 - 1 July 2001

ER -

Selection of auxiliary input signal and location of a SVC for damping electromechanical oscillations

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this