Skip to main navigation Skip to search Skip to main content

Structure development and interfacial interactions in flexible polyurethane foam-layered silicate nanocomposites

  • Arthur N. Wilkinson
  • , Nurul H. Fithriyah
  • , John L. Stanford
  • , Daniel Suckley
  • , Ryo Kato
  • , Norman S. Allen
  • , Christopher M. Liauw

    Research output: Contribution to journal › Article › peer-review

    Abstract

    Unmodified Na-montmorillonite (MMT) was swollen in a polyol/water mixture using an ultrasound technique. Polyurethane (PU) foam nanocomposites were formed via reaction of these polyol/water/Na-MMT mixtures with toluene diisocyanate (TDI). Forced-adiabatic attenuated total reflectance FTIR spectroscopy was used to determine the kinetics of both the PU copolymerisation and of the microphase separation between poly(ether-urethane) soft segments and polyurea hard segments. Consumption of TDI during the initial stages of the copolymerisation was accelerated significantly by the addition of ≤10 wt% Na-MMT. The initial rate of formation of urea groups also increased significantly upon addition of Na-MMT, but at reaction times >100 s a significant retardation occurred in the development of hydrogen bonding within the urea groups of the hard-segment phase that was recovered only after 1000 s. The reasons for this extensive disruption in structure development were investigated using flow microcalorimetry (FMC), diffuse reflectance Fourier-transform infrared spectroscopy (DRIFTS), and wide angle X-ray scattering (WAXS) to monitor the adsorption process and any chemical reaction between hydrated Na-MMT and a model monoisocyanate; 4-ethylphenyl isocyanate (4-EPI). DRIFTS spectra of 4-EPI adsorbed on Na-MMT revealed urea groups, indicating formation of N,N′-bis(4-ethylphenyl) urea. FMC indicated that a significant quantity of this urea formed at the surface and then desorbed. In addition, DRIFTS spectra indicated that the 4-EPI reacted with hydroxyl groups present at the edges of the silicate platelets to form urethane linkages. Thus, in a PU-foam reaction mixture, the water will tend to associate with the Na-MMT, either within the galleries or on the surfaces of silicate lamellae. Upon reaction with isocyanate, the presence of the Na-MMT both promotes the formation of urea and generates urethane linkages between silicate lamellae and the polyurethane. © 2010 VSP.
    Original languageEnglish
    Pages (from-to)423-436
    Number of pages13
    JournalComposite Interfaces
    Volume17
    Issue number5-7
    DOIs
    Publication statusPublished - 1 Jul 2010

    Keywords

    • clay
    • interfacial interactions
    • phase separation
    • Polyurethane

    Fingerprint

    Dive into the research topics of 'Structure development and interfacial interactions in flexible polyurethane foam-layered silicate nanocomposites'. Together they form a unique fingerprint.

    Cite this