The CMS data acquisition system software

G. Bauer; U. Behrens; K. Biery; J. Branson; E. Cano; H. Cheung; M. Ciganek; S. Cittolin; A. Coarasa; C. Deldicque; E. Dusinberre; S. Erhan; F. Fortes Rodrigues; D. Gigi; F. Glege; R. Gomez-Reino; J. Gutleber; D. Hatton; F. Laurens; A. Lopez Perez; F. Meijers; E. Meschi; A. Meyer; R. Mommsen; R. Moser; V. O'Dell; A. Oh; B. Orsini; V. Patras; C. Paus; A. Petrucci; M. Pieri; A. Racz; H. Sakulin; M. Sani; P. Schieferdecker; C. Schwick; D. Shpakov; S. Simon; K. Sumorok; M. Zanetti

doi:10.1088/1742-6596/219/2/022011

The CMS data acquisition system software

G. Bauer, U. Behrens, K. Biery, J. Branson, E. Cano, H. Cheung, M. Ciganek, S. Cittolin, A. Coarasa, C. Deldicque, E. Dusinberre, S. Erhan, F. Fortes Rodrigues, D. Gigi, F. Glege, R. Gomez-Reino, J. Gutleber, D. Hatton, F. Laurens, A. Lopez PerezF. Meijers, E. Meschi, A. Meyer, R. Mommsen, R. Moser, V. O'Dell, A. Oh, B. Orsini, V. Patras, C. Paus, A. Petrucci, M. Pieri, A. Racz, H. Sakulin, M. Sani, P. Schieferdecker, C. Schwick, D. Shpakov, S. Simon, K. Sumorok, M. Zanetti

Research output: Contribution to journal › Article › peer-review

Abstract

The CMS data acquisition system is made of two major subsystems: event building and event filter. The presented paper describes the architecture and design of the software that processes the data flow in the currently operating experiment. The central DAQ system relies on industry standard networks and processing equipment. Adopting a single software infrastructure in all subsystems of the experiment imposes, however, a number of different requirements. High efficiency and configuration flexibility are among the most important ones. The XDAQ software infrastructure has matured over an eight years development and testing period and has shown to be able to cope well with the requirements of the CMS experiment. © 2010 IOP Publishing Ltd.

Original language	English
Article number	022011
Journal	Journal of Physics: Conference Series
Volume	219
Issue number	1
DOIs	https://doi.org/10.1088/1742-6596/219/2/022011
Publication status	Published - 2010

Access to Document

10.1088/1742-6596/219/2/022011

Cite this

Bauer, G., Behrens, U., Biery, K., Branson, J., Cano, E., Cheung, H., Ciganek, M., Cittolin, S., Coarasa, A., Deldicque, C., Dusinberre, E., Erhan, S., Fortes Rodrigues, F., Gigi, D., Glege, F., Gomez-Reino, R., Gutleber, J., Hatton, D., Laurens, F., ... Zanetti, M. (2010). The CMS data acquisition system software. Journal of Physics: Conference Series, 219(1), Article 022011. https://doi.org/10.1088/1742-6596/219/2/022011

@article{0054beb875924e7daf50ee672fdb34e4,

title = "The CMS data acquisition system software",

abstract = "The CMS data acquisition system is made of two major subsystems: event building and event filter. The presented paper describes the architecture and design of the software that processes the data flow in the currently operating experiment. The central DAQ system relies on industry standard networks and processing equipment. Adopting a single software infrastructure in all subsystems of the experiment imposes, however, a number of different requirements. High efficiency and configuration flexibility are among the most important ones. The XDAQ software infrastructure has matured over an eight years development and testing period and has shown to be able to cope well with the requirements of the CMS experiment. {\textcopyright} 2010 IOP Publishing Ltd.",

author = "G. Bauer and U. Behrens and K. Biery and J. Branson and E. Cano and H. Cheung and M. Ciganek and S. Cittolin and A. Coarasa and C. Deldicque and E. Dusinberre and S. Erhan and {Fortes Rodrigues}, F. and D. Gigi and F. Glege and R. Gomez-Reino and J. Gutleber and D. Hatton and F. Laurens and {Lopez Perez}, A. and F. Meijers and E. Meschi and A. Meyer and R. Mommsen and R. Moser and V. O'Dell and A. Oh and B. Orsini and V. Patras and C. Paus and A. Petrucci and M. Pieri and A. Racz and H. Sakulin and M. Sani and P. Schieferdecker and C. Schwick and D. Shpakov and S. Simon and K. Sumorok and M. Zanetti",

year = "2010",

doi = "10.1088/1742-6596/219/2/022011",

language = "English",

volume = "219",

journal = "Journal of Physics: Conference Series",

issn = "1742-6596",

publisher = "IOP Publishing Ltd",

number = "1",

}

Bauer, G, Behrens, U, Biery, K, Branson, J, Cano, E, Cheung, H, Ciganek, M, Cittolin, S, Coarasa, A, Deldicque, C, Dusinberre, E, Erhan, S, Fortes Rodrigues, F, Gigi, D, Glege, F, Gomez-Reino, R, Gutleber, J, Hatton, D, Laurens, F, Lopez Perez, A, Meijers, F, Meschi, E, Meyer, A, Mommsen, R, Moser, R, O'Dell, V, Oh, A, Orsini, B, Patras, V, Paus, C, Petrucci, A, Pieri, M, Racz, A, Sakulin, H, Sani, M, Schieferdecker, P, Schwick, C, Shpakov, D, Simon, S, Sumorok, K & Zanetti, M 2010, 'The CMS data acquisition system software', Journal of Physics: Conference Series, vol. 219, no. 1, 022011. https://doi.org/10.1088/1742-6596/219/2/022011

TY - JOUR

T1 - The CMS data acquisition system software

AU - Bauer, G.

AU - Behrens, U.

AU - Biery, K.

AU - Branson, J.

AU - Cano, E.

AU - Cheung, H.

AU - Ciganek, M.

AU - Cittolin, S.

AU - Coarasa, A.

AU - Deldicque, C.

AU - Dusinberre, E.

AU - Erhan, S.

AU - Fortes Rodrigues, F.

AU - Gigi, D.

AU - Glege, F.

AU - Gomez-Reino, R.

AU - Gutleber, J.

AU - Hatton, D.

AU - Laurens, F.

AU - Lopez Perez, A.

AU - Meijers, F.

AU - Meschi, E.

AU - Meyer, A.

AU - Mommsen, R.

AU - Moser, R.

AU - O'Dell, V.

AU - Oh, A.

AU - Orsini, B.

AU - Patras, V.

AU - Paus, C.

AU - Petrucci, A.

AU - Pieri, M.

AU - Racz, A.

AU - Sakulin, H.

AU - Sani, M.

AU - Schieferdecker, P.

AU - Schwick, C.

AU - Shpakov, D.

AU - Simon, S.

AU - Sumorok, K.

AU - Zanetti, M.

PY - 2010

Y1 - 2010

N2 - The CMS data acquisition system is made of two major subsystems: event building and event filter. The presented paper describes the architecture and design of the software that processes the data flow in the currently operating experiment. The central DAQ system relies on industry standard networks and processing equipment. Adopting a single software infrastructure in all subsystems of the experiment imposes, however, a number of different requirements. High efficiency and configuration flexibility are among the most important ones. The XDAQ software infrastructure has matured over an eight years development and testing period and has shown to be able to cope well with the requirements of the CMS experiment. © 2010 IOP Publishing Ltd.

AB - The CMS data acquisition system is made of two major subsystems: event building and event filter. The presented paper describes the architecture and design of the software that processes the data flow in the currently operating experiment. The central DAQ system relies on industry standard networks and processing equipment. Adopting a single software infrastructure in all subsystems of the experiment imposes, however, a number of different requirements. High efficiency and configuration flexibility are among the most important ones. The XDAQ software infrastructure has matured over an eight years development and testing period and has shown to be able to cope well with the requirements of the CMS experiment. © 2010 IOP Publishing Ltd.

U2 - 10.1088/1742-6596/219/2/022011

DO - 10.1088/1742-6596/219/2/022011

M3 - Article

SN - 1742-6596

VL - 219

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

IS - 1

M1 - 022011

ER -

The CMS data acquisition system software

Abstract

Access to Document

Fingerprint

Cite this