The effect of mould flux properties on thermo-mechanical behaviour during billet continuous casting

Rajil Saraswat, Daan M. Maijer, Peter D. Lee, Kenneth C. Mills

    Research output: Contribution to journalArticlepeer-review


    During continuous casting mould powder forms a pool of liquid flux which infiltrates into the solidifying shell/mould gap and forms a flux film containing liquid and/or solid layers. Subsequent crystallisation of the film results in the formation of an air gap at the mould wall. An air gap can also be formed by the shrinkage of the solidified shell. In practise, no air gap is formed by shell shrinkage in the upper mould since molten flux will flow immediately into and fill any gap formed. However, in the lower mould, if the shell temperature falls below the break temperature of the flux there is no liquid to fill any gap formed by shell shrinkage and hence an air gap can form. A model was developed which determines the effect of the various layers (including the air gap) on the horizontal heat transfer between shell and mould. A fully coupled, heat transfer/stress analysis was used to calculate: (i) the thickness of the various layers of the flux film; (ii) horizontal heat flux; and (iii) the resultant stress in the solidified shell. The model predicted that: (a) the hoop stress increased as the interfacial thermal resistance decreases (i.e. the heat flux increases); (b) the maximum hoop stress at the exit decreased with increasing flux film thickness; (c) the ferro-static pressure tended to hinder the formation of an air gap at mid-face positions whereas in the corners the thicker shell tended to counteract the ferro-static pressure resulting in air gap formation; (d) the thickness of the liquid film at various positions in the mould was computed for fluxes with optimum break temperatures to determine if they provided liquid lubrication throughout the mould; and (e) the maximum stress occurred in the corner when casting with mould fluxes but at the mid-face when using oil. © 2007 ISIJ.
    Original languageEnglish
    Pages (from-to)98-104
    Number of pages6
    JournalISIJ international
    Issue number1
    Publication statusPublished - 2007


    • Billet
    • Continuous casting
    • Finite element
    • Heat transfer
    • Mould flux
    • Oil casting
    • Stress analysis


    Dive into the research topics of 'The effect of mould flux properties on thermo-mechanical behaviour during billet continuous casting'. Together they form a unique fingerprint.

    Cite this