Transferability of coarse-grained force fields: The polymer case

Paola Carbone, Hossein Ali Karimi Varzaneh, Xiaoyu Chen, Florian Müller-Plathe

    Research output: Contribution to journalArticlepeer-review


    A key question for all coarse-graining methodologies is the degree of transferability of the resulting force field between various systems and thermodynamic conditions. Here we present a detailed study of the transferability over different thermodynamic states of a coarse-grained (CG) force field developed using the iterative Boltzmann inversion method. The force field is optimized against distribution functions obtained from atomistic simulations. We analyze the polymer case by investigating the bulk of polystyrene and polyamide-6,6 whose coarse-grained models differ in the chain length and in the number of atoms lumped in one bead. The effect of temperature and pressure on static, dynamic, and thermodynamic properties is tested by comparing systematically the coarse-grain results with the atomistic ones. We find that the CG model describing the polystyrene is transferable only in a narrow range of temperature and it fails in describing the change of the bulk density when temperature is 80 K lower than the optimization one. Moreover the calculation of the self-diffusion coefficient shows that the CG model is characterized by a faster dynamics than the atomistic one and that it overestimates the isothermal compressibility. On the contrary, the polyamide-6,6 CG model turns out to be fully transferable between different thermodynamic conditions. The transferability is checked by changing either the temperature or the pressure of the simulation. We find that, in this case, the CG model is able to follow all the intra- and interstructural rearrangements caused by the temperature changes. In addition, while at low temperature the difference between the CG and atomistic dynamics is remarkable due to the presence of hydrogen bonds in the atomistic systems, for high temperatures, the speedup of the CG dynamics is strongly reduced, leading to a CG diffusion coefficient only six times bigger than the atomistic one. Moreover, the isothermal compressibility calculated at different temperatures agrees very well with the experimental one. We find that the polymer chain length does not affect the transferability of the force field and we attribute such transferability mainly to the finer model used in describing the polyamide-6,6 than the polystyrene. © 2008 American Institute of Physics.
    Original languageEnglish
    Article number064904
    JournalJournal of Chemical Physics
    Issue number6
    Publication statusPublished - 2008


    Dive into the research topics of 'Transferability of coarse-grained force fields: The polymer case'. Together they form a unique fingerprint.

    Cite this